提交 3acceca9 编写于 作者: D Dave Airlie

Merge tag 'drm-intel-fixes-2015-08-14' of git://anongit.freedesktop.org/drm-intel into drm-next

three display fixes for Intel.

* tag 'drm-intel-fixes-2015-08-14' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Commit planes on each crtc separately.
  drm/i915: calculate primary visibility changes instead of calling from set_config
  drm/i915: Only dither on 6bpc panels
......@@ -129,8 +129,9 @@ int intel_atomic_commit(struct drm_device *dev,
struct drm_atomic_state *state,
bool async)
{
int ret;
int i;
struct drm_crtc_state *crtc_state;
struct drm_crtc *crtc;
int ret, i;
if (async) {
DRM_DEBUG_KMS("i915 does not yet support async commit\n");
......@@ -142,48 +143,18 @@ int intel_atomic_commit(struct drm_device *dev,
return ret;
/* Point of no return */
/*
* FIXME: The proper sequence here will eventually be:
*
* drm_atomic_helper_swap_state(dev, state)
* drm_atomic_helper_commit_modeset_disables(dev, state);
* drm_atomic_helper_commit_planes(dev, state);
* drm_atomic_helper_commit_modeset_enables(dev, state);
* drm_atomic_helper_wait_for_vblanks(dev, state);
* drm_atomic_helper_cleanup_planes(dev, state);
* drm_atomic_state_free(state);
*
* once we have full atomic modeset. For now, just manually update
* plane states to avoid clobbering good states with dummy states
* while nuclear pageflipping.
*/
for (i = 0; i < dev->mode_config.num_total_plane; i++) {
struct drm_plane *plane = state->planes[i];
if (!plane)
continue;
plane->state->state = state;
swap(state->plane_states[i], plane->state);
plane->state->state = NULL;
}
drm_atomic_helper_swap_state(dev, state);
/* swap crtc_scaler_state */
for (i = 0; i < dev->mode_config.num_crtc; i++) {
struct drm_crtc *crtc = state->crtcs[i];
if (!crtc) {
continue;
}
to_intel_crtc(crtc)->config->scaler_state =
to_intel_crtc_state(state->crtc_states[i])->scaler_state;
for_each_crtc_in_state(state, crtc, crtc_state, i) {
to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
if (INTEL_INFO(dev)->gen >= 9)
skl_detach_scalers(to_intel_crtc(crtc));
drm_atomic_helper_commit_planes_on_crtc(crtc_state);
}
drm_atomic_helper_commit_planes(dev, state);
drm_atomic_helper_wait_for_vblanks(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
drm_atomic_state_free(state);
......
......@@ -11826,7 +11826,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
goto encoder_retry;
}
pipe_config->dither = pipe_config->pipe_bpp != base_bpp;
/* Dithering seems to not pass-through bits correctly when it should, so
* only enable it on 6bpc panels. */
pipe_config->dither = pipe_config->pipe_bpp == 6*3;
DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
......@@ -12624,17 +12626,17 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
modeset_update_crtc_power_domains(state);
drm_atomic_helper_commit_planes(dev, state);
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
if (!needs_modeset(crtc->state) || !crtc->state->enable)
if (!needs_modeset(crtc->state) || !crtc->state->enable) {
drm_atomic_helper_commit_planes_on_crtc(crtc_state);
continue;
}
update_scanline_offset(to_intel_crtc(crtc));
dev_priv->display.crtc_enable(crtc);
intel_crtc_enable_planes(crtc);
drm_atomic_helper_commit_planes_on_crtc(crtc_state);
}
/* FIXME: add subpixel order */
......@@ -12891,20 +12893,11 @@ intel_modeset_stage_output_state(struct drm_device *dev,
return 0;
}
static bool primary_plane_visible(struct drm_crtc *crtc)
{
struct intel_plane_state *plane_state =
to_intel_plane_state(crtc->primary->state);
return plane_state->visible;
}
static int intel_crtc_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
struct drm_atomic_state *state = NULL;
struct intel_crtc_state *pipe_config;
bool primary_plane_was_visible;
int ret;
BUG_ON(!set);
......@@ -12943,38 +12936,8 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
intel_update_pipe_size(to_intel_crtc(set->crtc));
primary_plane_was_visible = primary_plane_visible(set->crtc);
ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
if (ret == 0 &&
pipe_config->base.enable &&
pipe_config->base.planes_changed &&
!needs_modeset(&pipe_config->base)) {
struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
/*
* We need to make sure the primary plane is re-enabled if it
* has previously been turned off.
*/
if (ret == 0 && !primary_plane_was_visible &&
primary_plane_visible(set->crtc)) {
WARN_ON(!intel_crtc->active);
intel_post_enable_primary(set->crtc);
}
/*
* In the fastboot case this may be our only check of the
* state after boot. It would be better to only do it on
* the first update, but we don't have a nice way of doing that
* (and really, set_config isn't used much for high freq page
* flipping, so increasing its cost here shouldn't be a big
* deal).
*/
if (i915.fastboot && ret == 0)
intel_modeset_check_state(set->crtc->dev);
}
if (ret) {
DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
set->crtc->base.id, ret);
......@@ -13305,6 +13268,9 @@ intel_check_primary_plane(struct drm_plane *plane,
*/
if (IS_BROADWELL(dev))
intel_crtc->atomic.wait_vblank = true;
if (crtc_state)
intel_crtc->atomic.post_enable_primary = true;
}
/*
......@@ -13317,6 +13283,10 @@ intel_check_primary_plane(struct drm_plane *plane,
if (!state->visible || !fb)
intel_crtc->atomic.disable_ips = true;
if (!state->visible && old_state->visible &&
crtc_state && !needs_modeset(&crtc_state->base))
intel_crtc->atomic.pre_disable_primary = true;
intel_crtc->atomic.fb_bits |=
INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
......@@ -15034,6 +15004,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
struct intel_plane_state *plane_state;
memset(crtc->config, 0, sizeof(*crtc->config));
crtc->config->base.crtc = &crtc->base;
crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册