Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 39bd8064 编写于 作者: R Russell King 提交者： Russell King
浏览文件
操作

Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6

上级 db78450a 574ec547
隐藏空白更改
内联 并排
Showing with 454 addition and 19 deletion
arch/arm/mach-mx3/Kconfig
浏览文件 @ 39bd8064
......@@ -36,6 +36,14 @@ config MACH_PCM037
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
help
Add support for PCM037 EET baseboard extensions. If you are using the
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
command-line parameter.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
......
arch/arm/mach-mx3/Makefile
浏览文件 @ 39bd8064
......@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
......
arch/arm/mach-mx3/armadillo5x0.c
浏览文件 @ 39bd8064
......@@ -31,6 +31,8 @@
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -46,8 +48,10 @@
#include <mach/mmc.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include "devices.h"
#include "crm_regs.h"
static int armadillo5x0_pins[] = {
/* UART1 */
......@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
};
/*
* NAND Flash
*/
static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
.width = 1,
.hw_ecc = 1,
};
/*
* MTD NOR Flash
*/
static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
{
.name = "nor.bootloader",
.offset = 0x00000000,
.size = 4*32*1024,
}, {
.name = "nor.kernel",
.offset = MTDPART_OFS_APPEND,
.size = 16*128*1024,
}, {
.name = "nor.userland",
.offset = MTDPART_OFS_APPEND,
.size = 110*128*1024,
}, {
.name = "nor.config",
.offset = MTDPART_OFS_APPEND,
.size = 1*128*1024,
},
};
static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
.width = 2,
.parts = armadillo5x0_nor_flash_partitions,
.nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
};
static struct resource armadillo5x0_nor_flash_resource = {
.flags = IORESOURCE_MEM,
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + SZ_64M - 1,
};
static struct platform_device armadillo5x0_nor_flash = {
.name = "physmap-flash",
.id = -1,
.num_resources = 1,
.resource = &armadillo5x0_nor_flash_resource,
};
/*
......@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
/* Register FB */
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
/* Register NOR Flash */
mxc_register_device(&armadillo5x0_nor_flash,
&armadillo5x0_nor_flash_pdata);
/* Register NAND Flash */
mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
/* set NAND page size to 2k if not configured via boot mode pins */
__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
}
static void __init armadillo5x0_timer_init(void)
......
arch/arm/mach-mx3/devices.c
浏览文件 @ 39bd8064
......@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/common.h>
......
arch/arm/mach-mx3/pcm037.c
浏览文件 @ 39bd8064
......@@ -18,7 +18,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
......@@ -33,29 +33,67 @@
#include <linux/irq.h>
#include <linux/fsl_devices.h>
#include <mach/hardware.h>
#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <mach/board-pcm037.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
#include <mach/board-pcm037.h>
#include <mach/mmc.h>
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
#endif
#include "devices.h"
#include "pcm037.h"
static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
static int __init pcm037_variant_setup(char *str)
{
if (!strcmp("eet", str))
pcm037_instance = PCM037_EET;
else if (strcmp("pcm970", str))
pr_warning("Unknown pcm037 baseboard variant %s\n", str);
return 1;
}
/* Supported values: "pcm970" (default) and "eet" */
__setup("pcm037_variant=", pcm037_variant_setup);
enum pcm037_board_variant pcm037_variant(void)
{
return pcm037_instance;
}
/* UART1 with RTS/CTS handshake signals */
static unsigned int pcm037_uart1_handshake_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
};
/* UART1 without RTS/CTS handshake signals */
static unsigned int pcm037_uart1_pins[] = {
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
};
static unsigned int pcm037_pins[] = {
/* I2C */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
MX31_PIN_CSPI2_SS2__I2C3_SDA,
MX31_PIN_CSPI2_SCLK__I2C3_SCL,
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
......@@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
/* UART2 */
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
......@@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
MX31_PIN_D3_SPL__D3_SPL,
MX31_PIN_D3_CLS__D3_CLS,
MX31_PIN_LCS0__GPI03_23,
/* CSI */
IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
MX31_PIN_CSI_D6__CSI_D6,
MX31_PIN_CSI_D7__CSI_D7,
MX31_PIN_CSI_D8__CSI_D8,
MX31_PIN_CSI_D9__CSI_D9,
MX31_PIN_CSI_D10__CSI_D10,
MX31_PIN_CSI_D11__CSI_D11,
MX31_PIN_CSI_D12__CSI_D12,
MX31_PIN_CSI_D13__CSI_D13,
MX31_PIN_CSI_D14__CSI_D14,
MX31_PIN_CSI_D15__CSI_D15,
MX31_PIN_CSI_HSYNC__CSI_HSYNC,
MX31_PIN_CSI_MCLK__CSI_MCLK,
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
};
static struct physmap_flash_data pcm037_flash_data = {
......@@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
.hw_ecc = 1,
};
#ifdef CONFIG_I2C_IMX
static struct imxi2c_platform_data pcm037_i2c_1_data = {
.bitrate = 100000,
};
static struct imxi2c_platform_data pcm037_i2c_2_data = {
.bitrate = 20000,
};
static struct at24_platform_data board_eeprom = {
.byte_len = 4096,
.page_size = 32,
.flags = AT24_FLAG_ADDR16,
};
static int pcm037_camera_power(struct device *dev, int on)
{
/* disable or enable the camera in X7 or X8 PCM970 connector */
gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
return 0;
}
static struct i2c_board_info pcm037_i2c_2_devices[] = {
{
I2C_BOARD_INFO("mt9t031", 0x5d),
},
};
static struct soc_camera_link iclink = {
.bus_id = 0, /* Must match with the camera ID */
.power = pcm037_camera_power,
.board_info = &pcm037_i2c_2_devices[0],
.i2c_adapter_id = 2,
.module_name = "mt9t031",
};
static struct i2c_board_info pcm037_i2c_devices[] = {
{
{
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
......@@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
.type = "pcf8563",
}
};
#endif
static struct platform_device pcm037_camera = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &iclink,
},
};
/* Not connected by default */
#ifdef PCM970_SDHC_RW_SWITCH
......@@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
.exit = pcm970_sdhc1_exit,
};
struct mx3_camera_pdata camera_pdata = {
.dma_dev = &mx3_ipu.dev,
.flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
.mclk_10khz = 2000,
};
static int __init pcm037_camera_alloc_dma(const size_t buf_size)
{
dma_addr_t dma_handle;
void *buf;
int dma;
if (buf_size < 2 * 1024 * 1024)
return -EINVAL;
buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
if (!buf) {
pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
return -ENOMEM;
}
memset(buf, 0, buf_size);
dma = dma_declare_coherent_memory(&mx3_camera.dev,
dma_handle, dma_handle, buf_size,
DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
/* The way we call dma_declare_coherent_memory only a malloc can fail */
return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
}
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
&pcm037_camera,
};
static struct ipu_platform_data mx3_ipu_data = {
......@@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
}, {
/* 240x320 @ 60 Hz */
.name = "CMEL-OLED",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 185925,
.left_margin = 9,
.right_margin = 16,
.upper_margin = 7,
.lower_margin = 9,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
};
......@@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
if (pcm037_variant() == PCM037_EET)
mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
else
mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
ARRAY_SIZE(pcm037_uart1_handshake_pins),
"pcm037_uart1");
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
......@@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
}
#ifdef CONFIG_I2C_IMX
/* I2C adapters and devices */
i2c_register_board_info(1, pcm037_i2c_devices,
ARRAY_SIZE(pcm037_i2c_devices));
mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
#endif
mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
if (!gpio_usbotg_hs_activate())
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
/* CSI */
/* Camera power: default - off */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
if (!ret)
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
else
iclink.power = NULL;
if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
mxc_register_device(&mx3_camera, &camera_pdata);
}
static void __init pcm037_timer_init(void)
......@@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
MACHINE_END
arch/arm/mach-mx3/pcm037.h 0 → 100644
浏览文件 @ 39bd8064
#ifndef __PCM037_H__
#define __PCM037_H__
enum pcm037_board_variant {
PCM037_PCM970,
PCM037_EET,
};
extern enum pcm037_board_variant pcm037_variant(void);
#endif
arch/arm/mach-mx3/pcm037_eet.c 0 → 100644
浏览文件 @ 39bd8064
/*
* Copyright (C) 2009
* Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <mach/common.h>
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
#include <mach/spi.h>
#endif
#include <mach/iomux-mx3.h>
#include <asm/mach-types.h>
#include "pcm037.h"
#include "devices.h"
static unsigned int pcm037_eet_pins[] = {
/* SPI #1 */
MX31_PIN_CSPI1_MISO__MISO,
MX31_PIN_CSPI1_MOSI__MOSI,
MX31_PIN_CSPI1_SCLK__SCLK,
MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
/* GPIO keys */
IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
/* LEDs */
IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
};
/* SPI */
static struct spi_board_info pcm037_spi_dev[] = {
{
.modalias = "dac124s085",
.max_speed_hz = 400000,
.bus_num = 0,
.chip_select = 0, /* Index in pcm037_spi1_cs[] */
.mode = SPI_CPHA,
},
};
/* Platform Data for MXC CSPI */
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
struct spi_imx_master pcm037_spi1_master = {
.chipselect = pcm037_spi1_cs,
.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
};
#endif
/* GPIO-keys input device */
static struct gpio_keys_button pcm037_gpio_keys[] = {
{
.type = EV_KEY,
.code = KEY_L,
.gpio = 0,
.desc = "Wheel Manual",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_A,
.gpio = 1,
.desc = "Wheel AF",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_V,
.gpio = 2,
.desc = "Wheel View",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_M,
.gpio = 3,
.desc = "Wheel Menu",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_UP,
.gpio = 32,
.desc = "Nav Pad Up",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_RIGHT,
.gpio = 33,
.desc = "Nav Pad Right",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_DOWN,
.gpio = 34,
.desc = "Nav Pad Down",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_LEFT,
.gpio = 35,
.desc = "Nav Pad Left",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_ENTER,
.gpio = 38,
.desc = "Nav Pad Ok",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_O,
.gpio = 39,
.desc = "Wheel Off",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_FORWARD,
.gpio = 50,
.desc = "Focus Forward",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_BACK,
.gpio = 51,
.desc = "Focus Backward",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_MIDDLE,
.gpio = 52,
.desc = "Release Half",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_EXTRA,
.gpio = 53,
.desc = "Release Full",
.wakeup = 0,
},
};
static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
.buttons = pcm037_gpio_keys,
.nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
.rep = 0, /* No auto-repeat */
};
static struct platform_device pcm037_gpio_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &pcm037_gpio_keys_platform_data,
},
};
static int eet_init_devices(void)
{
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
return 0;
mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
/* SPI */
spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
#endif
platform_device_register(&pcm037_gpio_keys_device);
return 0;
}
late_initcall(eet_init_devices);
arch/arm/plat-mxc/include/mach/iomux-mx3.h
浏览文件 @ 39bd8064
......@@ -602,6 +602,8 @@ enum iomux_pins {
#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或