提交 39aefabb 编写于 作者: S Sylwester Nawrocki 提交者: Kukjin Kim

ARM: S5PV210: Add support for NOON010PC30 sensor on GONI board

Add platform data for CIF camera sensor and FIMC platform data
entries for it. Add platform device for s5p-fimc media device
driver and the camera port A I/O pins initialization.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 b74f2fb5
......@@ -100,6 +100,7 @@ config MACH_GONI
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_FIMC
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
......
......@@ -48,6 +48,11 @@
#include <plat/s5p-time.h>
#include <plat/mfc.h>
#include <plat/regs-fb-v4.h>
#include <plat/camport.h>
#include <media/v4l2-mediabus.h>
#include <media/s5p_fimc.h>
#include <media/noon010pc30.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -272,6 +277,14 @@ static void __init goni_tsp_init(void)
i2c2_devs[0].irq = gpio_to_irq(gpio);
}
static void goni_camera_init(void)
{
s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
/* Set max driver strength on CAM_A_CLKOUT pin. */
s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
}
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
......@@ -808,6 +821,39 @@ static void goni_setup_sdhci(void)
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
};
static struct noon010pc30_platform_data noon010pc30_pldata = {
.clk_rate = 16000000UL,
.gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */
.gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
};
static struct i2c_board_info noon010pc30_board_info = {
I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
.platform_data = &noon010pc30_pldata,
};
static struct s5p_fimc_isp_info goni_camera_sensors[] = {
{
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,
},
};
struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
.isp_info = goni_camera_sensors,
.num_clients = ARRAY_SIZE(goni_camera_sensors),
};
struct platform_device s5p_device_fimc_md = {
.name = "s5p-fimc-md",
.id = -1,
};
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
......@@ -825,6 +871,7 @@ static struct platform_device *goni_devices[] __initdata = {
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc_md,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
......@@ -893,6 +940,12 @@ static void __init goni_machine_init(void)
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
/* FIMC */
s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
&s5p_device_fimc_md);
goni_camera_init();
/* SPI */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册