提交 3985ee3b 编写于 作者: B Bartlomiej Zolnierkiewicz

ide: add IDE_HFLAG_LEGACY_IRQS host flag

Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set
hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert
atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it.

While at it:

* In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 1c51361a
......@@ -172,9 +172,6 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
u8 ch = hwif->channel;
struct pci_dev *pdev = hwif->pci_dev;
if (!hwif->irq)
hwif->irq = ch ? 15 : 14;
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;
hwif->drives[0].autotune = 1;
......@@ -200,7 +197,7 @@ static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
.name = "ATIIXP",
.init_hwif = init_hwif_atiixp,
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
.host_flags = IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......@@ -208,7 +205,8 @@ static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
.name = "SB600_PATA",
.init_hwif = init_hwif_atiixp,
.enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......
......@@ -341,16 +341,6 @@ static u8 __devinit piix_cable_detect(ide_hwif_t *hwif)
static void __devinit init_hwif_piix(ide_hwif_t *hwif)
{
#ifndef CONFIG_IA64
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
#endif /* CONFIG_IA64 */
if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_82371MX) {
/* This is a painful system best to let it self tune for now */
return;
}
hwif->set_pio_mode = &piix_set_pio_mode;
hwif->set_dma_mode = &piix_set_dma_mode;
......@@ -378,12 +368,18 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif)
hwif->ide_dma_clear_irq = &piix_dma_clear_irq;
}
#ifndef CONFIG_IA64
#define IDE_HFLAGS_PIIX (IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE)
#else
#define IDE_HFLAGS_PIIX IDE_HFLAG_BOOTABLE
#endif
#define DECLARE_PIIX_DEV(name_str, udma) \
{ \
.name = name_str, \
.init_hwif = init_hwif_piix, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
.host_flags = IDE_HFLAG_BOOTABLE, \
.host_flags = IDE_HFLAGS_PIIX, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
.mwdma_mask = ATA_MWDMA12_ONLY, \
......@@ -396,7 +392,7 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif)
.init_chipset = init_chipset_ich, \
.init_hwif = init_hwif_ich, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
.host_flags = IDE_HFLAG_BOOTABLE, \
.host_flags = IDE_HFLAGS_PIIX, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
.mwdma_mask = ATA_MWDMA12_ONLY, \
......@@ -414,11 +410,11 @@ static ide_pci_device_t piix_pci_info[] __devinitdata = {
* of the bit 14 of the IDETIM register at offset 0x6c
*/
.name = "MPIIX",
.init_hwif = init_hwif_piix,
.enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
.host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA |
IDE_HFLAG_BOOTABLE,
IDE_HFLAGS_PIIX,
.pio_mask = ATA_PIO4,
/* This is a painful system best to let it self tune for now */
},
/* 3 */ DECLARE_PIIX_DEV("PIIX3", 0x00), /* no udma */
......
......@@ -360,9 +360,6 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
{
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->set_dma_mode = &svwks_set_dma_mode;
hwif->udma_filter = &svwks_udma_filter;
......@@ -384,7 +381,7 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
.name = "SvrWks OSB4",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* UDMA is problematic on OSB4 */
......@@ -392,7 +389,7 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB5",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......@@ -400,7 +397,7 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB6",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......@@ -408,7 +405,8 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB6",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......@@ -416,7 +414,8 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
.name = "SvrWks HT1000",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......
......@@ -564,9 +564,6 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
{
u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->set_pio_mode = &sis_set_pio_mode;
hwif->set_dma_mode = &sis_set_dma_mode;
......@@ -590,7 +587,8 @@ static ide_pci_device_t sis5513_chipset __devinitdata = {
.init_chipset = init_chipset_sis5513,
.init_hwif = init_hwif_sis5513,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_NO_AUTODMA | IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
};
......
......@@ -133,9 +133,6 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
u8 reg47 = 0;
u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->set_pio_mode = &slc90e66_set_pio_mode;
hwif->set_dma_mode = &slc90e66_set_dma_mode;
......@@ -156,7 +153,7 @@ static ide_pci_device_t slc90e66_chipset __devinitdata = {
.name = "SLC90E66",
.init_hwif = init_hwif_slc90e66,
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
.host_flags = IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.swdma_mask = ATA_SWDMA2_ONLY,
.mwdma_mask = ATA_MWDMA12_ONLY,
......
......@@ -562,6 +562,9 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
ide_hwif_setup_dma(dev, d, hwif);
if ((d->host_flags & IDE_HFLAG_LEGACY_IRQS) && hwif->irq == 0)
hwif->irq = port ? 15 : 14;
hwif->host_flags = d->host_flags;
hwif->pio_mask = d->pio_mask;
......
......@@ -1259,6 +1259,8 @@ enum {
IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
/* serialize ports */
IDE_HFLAG_SERIALIZE = (1 << 20),
/* use legacy IRQs */
IDE_HFLAG_LEGACY_IRQS = (1 << 21),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册