gpio: Support no-irq stmpe mode

Adds support for boards which have an STMPE GPIO device without the
interrupt pin connected. This means that no interrupt can be received
but the GPIO pins can still be driven and read.

Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Tested-by: NMichel Jaouen <michel.jaouen@stericsson.com>
Signed-off-by: NChris Blair <chris.blair@stericsson.com>
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

drivers/gpio/gpio-stmpe.c

@@ -307,13 +307,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	struct stmpe_gpio_platform_data *pdata;
 	struct stmpe_gpio *stmpe_gpio;
 	int ret;
-	int irq;
+	int irq = 0;
 
 	pdata = stmpe->pdata->gpio;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
 
 	stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL);
 	if (!stmpe_gpio)
@@ -330,21 +328,28 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	stmpe_gpio->chip.dev = &pdev->dev;
 	stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
 
-	stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
+	if (irq >= 0)
+		stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
+	else
+		dev_info(&pdev->dev,
+			"device configured in no-irq mode; "
+			"irqs are not available\n");
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
 	if (ret)
 		goto out_free;
 
-	ret = stmpe_gpio_irq_init(stmpe_gpio);
-	if (ret)
-		goto out_disable;
+	if (irq >= 0) {
+		ret = stmpe_gpio_irq_init(stmpe_gpio);
+		if (ret)
+			goto out_disable;
 
-	ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT,
-				   "stmpe-gpio", stmpe_gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
-		goto out_removeirq;
+		ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq,
+				IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+			goto out_removeirq;
+		}
 	}
 
 	ret = gpiochip_add(&stmpe_gpio->chip);
@@ -361,9 +366,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	return 0;
 
 out_freeirq:
-	free_irq(irq, stmpe_gpio);
+	if (irq >= 0)
+		free_irq(irq, stmpe_gpio);
 out_removeirq:
-	stmpe_gpio_irq_remove(stmpe_gpio);
+	if (irq >= 0)
+		stmpe_gpio_irq_remove(stmpe_gpio);
 out_disable:
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 out_free:
@@ -391,8 +398,10 @@ static int __devexit stmpe_gpio_remove(struct platform_device *pdev)
 
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 
-	free_irq(irq, stmpe_gpio);
-	stmpe_gpio_irq_remove(stmpe_gpio);
+	if (irq >= 0) {
+		free_irq(irq, stmpe_gpio);
+		stmpe_gpio_irq_remove(stmpe_gpio);
+	}
 	platform_set_drvdata(pdev, NULL);
 	kfree(stmpe_gpio);