dt-bindings: sh_eth convert bindings to json-schema

Convert Renesas Electronics SH EtherMAC bindings documentation to
json-schema.  Also name bindings documentation file according to the compat
string being documented.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/renesas,ether.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,ether.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Electronics SH EtherMAC
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,gether-r8a7740   # device is a part of R8A7740 SoC
+              - renesas,gether-r8a77980  # device is a part of R8A77980 SoC
+              - renesas,ether-r7s72100   # device is a part of R7S72100 SoC
+              - renesas,ether-r7s9210    # device is a part of R7S9210 SoC
+      - items:
+          - enum:
+              - renesas,ether-r8a7778    # device is a part of R8A7778 SoC
+              - renesas,ether-r8a7779    # device is a part of R8A7779 SoC
+          - enum:
+              - renesas,rcar-gen1-ether  # a generic R-Car Gen1 device
+      - items:
+          - enum:
+              - renesas,ether-r8a7745    # device is a part of R8A7745 SoC
+              - renesas,ether-r8a7743    # device is a part of R8A7743 SoC
+              - renesas,ether-r8a7790    # device is a part of R8A7790 SoC
+              - renesas,ether-r8a7791    # device is a part of R8A7791 SoC
+              - renesas,ether-r8a7793    # device is a part of R8A7793 SoC
+              - renesas,ether-r8a7794    # device is a part of R8A7794 SoC
+          - enum:
+              - renesas,rcar-gen2-ether  # a generic R-Car Gen2 or RZ/G1 device
+
+  reg:
+    items:
+       - description: E-DMAC/feLic registers
+       - description: TSU registers
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    description: number of address cells for the MDIO bus
+    const: 1
+
+  '#size-cells':
+    description: number of size cells on the MDIO bus
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  pinctrl-0: true
+
+  pinctrl-names: true
+
+  renesas,no-ether-link:
+    type: boolean
+    description:
+      specify when a board does not provide a proper Ether LINK signal
+
+  renesas,ether-link-active-low:
+    type: boolean
+    description:
+      specify when the Ether LINK signal is active-low instead of normal
+      active-high
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+  - pinctrl-0
+
+examples:
+  # Lager board
+  - |
+    #include <dt-bindings/clock/r8a7790-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet@ee700000 {
+        compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether";
+        reg = <0 0xee700000 0 0x400>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+        phy-mode = "rmii";
+        phy-handle = <&phy1>;
+        pinctrl-0 = <&ether_pins>;
+        pinctrl-names = "default";
+        renesas,ether-link-active-low;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy1: ethernet-phy@1 {
+            reg = <1>;
+            interrupt-parent = <&irqc0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-0 = <&phy1_pins>;
+            pinctrl-names = "default";
+        };
+    };

Documentation/devicetree/bindings/net/sh_eth.txt

-* Renesas Electronics SH EtherMAC
-
-This file provides information on what the device node for the SH EtherMAC
-interface contains.
-
-Required properties:
-- compatible: Must contain one or more of the following:
-	      "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
-	      "renesas,ether-r8a7743"  if the device is a part of R8A7743 SoC.
-	      "renesas,ether-r8a7745"  if the device is a part of R8A7745 SoC.
-	      "renesas,ether-r8a7778"  if the device is a part of R8A7778 SoC.
-	      "renesas,ether-r8a7779"  if the device is a part of R8A7779 SoC.
-	      "renesas,ether-r8a7790"  if the device is a part of R8A7790 SoC.
-	      "renesas,ether-r8a7791"  if the device is a part of R8A7791 SoC.
-	      "renesas,ether-r8a7793"  if the device is a part of R8A7793 SoC.
-	      "renesas,ether-r8a7794"  if the device is a part of R8A7794 SoC.
-	      "renesas,gether-r8a77980" if the device is a part of R8A77980 SoC.
-	      "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
-	      "renesas,ether-r7s9210" if the device is a part of R7S9210 SoC.
-	      "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device.
-	      "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1
-	                                device.
-
-	      When compatible with the generic version, nodes must list
-	      the SoC-specific version corresponding to the platform
-	      first followed by the generic version.
-
-- reg: offset and length of (1) the E-DMAC/feLic register block (required),
-       (2) the TSU register block (optional).
-- interrupts: interrupt specifier for the sole interrupt.
-- phy-mode: see ethernet.txt file in the same directory.
-- phy-handle: see ethernet.txt file in the same directory.
-- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
-- #size-cells: number of size cells on the MDIO bus, must be equal to 0.
-- clocks: clock phandle and specifier pair.
-- pinctrl-0: phandle, referring to a default pin configuration node.
-
-Optional properties:
-- pinctrl-names: pin configuration state name ("default").
-- renesas,no-ether-link: boolean, specify when a board does not provide a proper
-			 Ether LINK signal.
-- renesas,ether-link-active-low: boolean, specify when the Ether LINK signal is
-				 active-low instead of normal active-high.
-
-Example (Lager board):
-
-	ethernet@ee700000 {
-		compatible = "renesas,ether-r8a7790",
-		             "renesas,rcar-gen2-ether";
-		reg = <0 0xee700000 0 0x400>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
-		phy-mode = "rmii";
-		phy-handle = <&phy1>;
-		pinctrl-0 = <&ether_pins>;
-		pinctrl-names = "default";
-		renesas,ether-link-active-low;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			interrupt-parent = <&irqc0>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-0 = <&phy1_pins>;
-			pinctrl-names = "default";
-		};
-	};

MAINTAINERS

@@ -13810,7 +13810,7 @@ R:	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
 L:	netdev@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 F:	Documentation/devicetree/bindings/net/renesas,*.txt
-F:	Documentation/devicetree/bindings/net/sh_eth.txt
+F:	Documentation/devicetree/bindings/net/renesas,*.yaml
 F:	drivers/net/ethernet/renesas/
 F:	include/linux/sh_eth.h