提交 36e3ff44 编写于 作者: D dann frazier 提交者: Wim Van Sebroeck

watchdog: hpwdt (4/12): Despecificate driver from iLO2

This driver supports both iLO2 and iLO3, but our user-visible strings
currently only reference iLO2. Let's just call it "iLO2+" to avoid having
to update strings for each iLO generation. This driver doesn't support
iLO ASICs prior to iLO2, but that is sufficiently explained in Kconfig.
Signed-off-by: Ndann frazier <dannf@hp.com>
Acked-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
上级 923410d0
......@@ -574,11 +574,11 @@ config IT87_WDT
be called it87_wdt.
config HP_WATCHDOG
tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
tristate "HP Proliant iLO2+ Hardware Watchdog Timer"
depends on X86
help
A software monitoring watchdog and NMI sourcing driver. This driver
will detect lockups and provide stack trace. Also, when an NMI
will detect lockups and provide a stack trace. Also, when an NMI
occurs this driver will make the necessary BIOS calls to log
the cause of the NMI. This is a driver that will only load on a
HP ProLiant system with a minimum of iLO2 support.
......
......@@ -48,8 +48,8 @@ static unsigned long __iomem *hpwdt_timer_reg;
static unsigned long __iomem *hpwdt_timer_con;
static struct pci_device_id hpwdt_devices[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) },
{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) },
{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */
{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */
{0}, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, hpwdt_devices);
......@@ -548,7 +548,7 @@ static const struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
.identity = "HP iLO2 HW Watchdog Timer",
.identity = "HP iLO2+ HW Watchdog Timer",
};
static long hpwdt_ioctl(struct file *file, unsigned int cmd,
......@@ -654,13 +654,13 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
hpwdt_check_nmi_sourcing(dev);
/*
* First let's find out if we are on an iLO2 server. We will
* First let's find out if we are on an iLO2+ server. We will
* not run on a legacy ASM box.
* So we only support the G5 ProLiant servers and higher.
*/
if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
dev_warn(&dev->dev,
"This server does not have an iLO2 ASIC.\n");
"This server does not have an iLO2+ ASIC.\n");
return -ENODEV;
}
......@@ -674,7 +674,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
pci_mem_addr = pci_iomap(dev, 1, 0x80);
if (!pci_mem_addr) {
dev_warn(&dev->dev,
"Unable to detect the iLO2 server memory.\n");
"Unable to detect the iLO2+ server memory.\n");
retval = -ENOMEM;
goto error_pci_iomap;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册