Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 36c7dc44 编写于 作者: C Corey Minyard 提交者： Linus Torvalds
浏览文件
操作

IPMI: Style fixes in the misc code 

Lots of style fixes for the miscellaneous IPMI files.  No functional
changes.  Basically fixes everything reported by checkpatch and fixes the
comment style.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 c305e3d3
隐藏空白更改
内联 并排
Showing with 227 addition and 201 deletion
drivers/char/ipmi/ipmi_poweroff.c
浏览文件 @ 36c7dc44
......@@ -87,7 +87,10 @@ MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog "
/* parameter definition to allow user to flag power cycle */
module_param(poweroff_powercycle, int, 0644);
MODULE_PARM_DESC(poweroff_powercycle, " Set to non-zero to enable power cycle instead of power down. Power cycle is contingent on hardware support, otherwise it defaults back to power down.");
MODULE_PARM_DESC(poweroff_powercycle,
" Set to non-zero to enable power cycle instead of power"
" down. Power cycle is contingent on hardware support,"
" otherwise it defaults back to power down.");
/* Stuff from the get device id command. */
static unsigned int mfg_id;
......@@ -95,10 +98,12 @@ static unsigned int prod_id;
static unsigned char capabilities;
static unsigned char ipmi_version;
/* We use our own messages for this operation, we don't let the system
allocate them, since we may be in a panic situation. The whole
thing is single-threaded, anyway, so multiple messages are not
required. */
/*
* We use our own messages for this operation, we don't let the system
* allocate them, since we may be in a panic situation. The whole
* thing is single-threaded, anyway, so multiple messages are not
* required.
*/
static atomic_t dummy_count = ATOMIC_INIT(0);
static void dummy_smi_free(struct ipmi_smi_msg *msg)
{
......@@ -108,12 +113,10 @@ static void dummy_recv_free(struct ipmi_recv_msg *msg)
{
atomic_dec(&dummy_count);
}
static struct ipmi_smi_msg halt_smi_msg =
{
static struct ipmi_smi_msg halt_smi_msg = {
.done = dummy_smi_free
};
static struct ipmi_recv_msg halt_recv_msg =
{
static struct ipmi_recv_msg halt_recv_msg = {
.done = dummy_recv_free
};
......@@ -130,8 +133,7 @@ static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data)
complete(comp);
}
static struct ipmi_user_hndl ipmi_poweroff_handler =
{
static struct ipmi_user_hndl ipmi_poweroff_handler = {
.ipmi_recv_hndl = receive_handler
};
......@@ -198,47 +200,47 @@ static int ipmi_request_in_rc_mode(ipmi_user_t user,
static void (*atca_oem_poweroff_hook)(ipmi_user_t user);
static void pps_poweroff_atca (ipmi_user_t user)
static void pps_poweroff_atca(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
printk(KERN_INFO PFX "PPS powerdown hook used");
send_msg.netfn = IPMI_NETFN_OEM;
send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART;
send_msg.data = IPMI_ATCA_PPS_IANA;
send_msg.data_len = 3;
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
printk(KERN_ERR PFX "Unable to send ATCA ,"
" IPMI error 0x%x\n", rv);
}
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
printk(KERN_INFO PFX "PPS powerdown hook used");
send_msg.netfn = IPMI_NETFN_OEM;
send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART;
send_msg.data = IPMI_ATCA_PPS_IANA;
send_msg.data_len = 3;
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
printk(KERN_ERR PFX "Unable to send ATCA ,"
" IPMI error 0x%x\n", rv);
}
return;
}
static int ipmi_atca_detect (ipmi_user_t user)
static int ipmi_atca_detect(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[1];
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
/*
* Use get address info to check and see if we are ATCA
......@@ -252,28 +254,30 @@ static int ipmi_atca_detect (ipmi_user_t user)
(struct ipmi_addr *) &smi_addr,
&send_msg);
printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", mfg_id, prod_id);
if((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID)
&& (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) {
printk(KERN_INFO PFX "Installing Pigeon Point Systems Poweroff Hook\n");
printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n",
mfg_id, prod_id);
if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID)
&& (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) {
printk(KERN_INFO PFX
"Installing Pigeon Point Systems Poweroff Hook\n");
atca_oem_poweroff_hook = pps_poweroff_atca;
}
return !rv;
}
static void ipmi_poweroff_atca (ipmi_user_t user)
static void ipmi_poweroff_atca(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[4];
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
printk(KERN_INFO PFX "Powering down via ATCA power command\n");
......@@ -287,22 +291,23 @@ static void ipmi_poweroff_atca (ipmi_user_t user)
data[2] = 0; /* Power Level */
data[3] = 0; /* Don't change saved presets */
send_msg.data = data;
send_msg.data_len = sizeof (data);
send_msg.data_len = sizeof(data);
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
/** At this point, the system may be shutting down, and most
** serial drivers (if used) will have interrupts turned off
** it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE
** return code
**/
if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
/*
* At this point, the system may be shutting down, and most
* serial drivers (if used) will have interrupts turned off
* it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE
* return code
*/
if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
printk(KERN_ERR PFX "Unable to send ATCA powerdown message,"
" IPMI error 0x%x\n", rv);
goto out;
}
if(atca_oem_poweroff_hook)
if (atca_oem_poweroff_hook)
return atca_oem_poweroff_hook(user);
out:
return;
......@@ -324,13 +329,13 @@ static void ipmi_poweroff_atca (ipmi_user_t user)
#define IPMI_CPI1_PRODUCT_ID 0x000157
#define IPMI_CPI1_MANUFACTURER_ID 0x0108
static int ipmi_cpi1_detect (ipmi_user_t user)
static int ipmi_cpi1_detect(ipmi_user_t user)
{
return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID)
&& (prod_id == IPMI_CPI1_PRODUCT_ID));
}
static void ipmi_poweroff_cpi1 (ipmi_user_t user)
static void ipmi_poweroff_cpi1(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct ipmi_ipmb_addr ipmb_addr;
......@@ -342,12 +347,12 @@ static void ipmi_poweroff_cpi1 (ipmi_user_t user)
unsigned char aer_addr;
unsigned char aer_lun;
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
printk(KERN_INFO PFX "Powering down via CPI1 power command\n");
......@@ -439,7 +444,7 @@ static void ipmi_poweroff_cpi1 (ipmi_user_t user)
*/
#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00}
static int ipmi_dell_chassis_detect (ipmi_user_t user)
static int ipmi_dell_chassis_detect(ipmi_user_t user)
{
const char ipmi_version_major = ipmi_version & 0xF;
const char ipmi_version_minor = (ipmi_version >> 4) & 0xF;
......@@ -458,25 +463,25 @@ static int ipmi_dell_chassis_detect (ipmi_user_t user)
#define IPMI_NETFN_CHASSIS_REQUEST 0
#define IPMI_CHASSIS_CONTROL_CMD 0x02
static int ipmi_chassis_detect (ipmi_user_t user)
static int ipmi_chassis_detect(ipmi_user_t user)
{
/* Chassis support, use it. */
return (capabilities & 0x80);
}
static void ipmi_poweroff_chassis (ipmi_user_t user)
static void ipmi_poweroff_chassis(ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[1];
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
powercyclefailed:
printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n",
......@@ -539,7 +544,7 @@ static struct poweroff_function poweroff_functions[] = {
/* Called on a powerdown request. */
static void ipmi_poweroff_function (void)
static void ipmi_poweroff_function(void)
{
if (!ready)
return;
......@@ -573,13 +578,13 @@ static void ipmi_po_new_smi(int if_num, struct device *device)
ipmi_ifnum = if_num;
/*
* Do a get device ide and store some results, since this is
/*
* Do a get device ide and store some results, since this is
* used by several functions.
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
send_msg.netfn = IPMI_NETFN_APP_REQUEST;
send_msg.cmd = IPMI_GET_DEVICE_ID_CMD;
......@@ -644,8 +649,7 @@ static void ipmi_po_smi_gone(int if_num)
pm_power_off = old_poweroff_func;
}
static struct ipmi_smi_watcher smi_watcher =
{
static struct ipmi_smi_watcher smi_watcher = {
.owner = THIS_MODULE,
.new_smi = ipmi_po_new_smi,
.smi_gone = ipmi_po_smi_gone
......@@ -687,12 +691,12 @@ static struct ctl_table_header *ipmi_table_header;
/*
* Startup and shutdown functions.
*/
static int ipmi_poweroff_init (void)
static int ipmi_poweroff_init(void)
{
int rv;
printk (KERN_INFO "Copyright (C) 2004 MontaVista Software -"
" IPMI Powerdown via sys_reboot.\n");
printk(KERN_INFO "Copyright (C) 2004 MontaVista Software -"
" IPMI Powerdown via sys_reboot.\n");
if (poweroff_powercycle)
printk(KERN_INFO PFX "Power cycle is enabled.\n");
......
drivers/char/ipmi/ipmi_watchdog.c
浏览文件 @ 36c7dc44
......@@ -54,13 +54,15 @@
#include <asm/atomic.h>
#ifdef CONFIG_X86
/* This is ugly, but I've determined that x86 is the only architecture
that can reasonably support the IPMI NMI watchdog timeout at this
time. If another architecture adds this capability somehow, it
will have to be a somewhat different mechanism and I have no idea
how it will work. So in the unlikely event that another
architecture supports this, we can figure out a good generic
mechanism for it at that time. */
/*
* This is ugly, but I've determined that x86 is the only architecture
* that can reasonably support the IPMI NMI watchdog timeout at this
* time. If another architecture adds this capability somehow, it
* will have to be a somewhat different mechanism and I have no idea
* how it will work. So in the unlikely event that another
* architecture supports this, we can figure out a good generic
* mechanism for it at that time.
*/
#include <asm/kdebug.h>
#define HAVE_DIE_NMI
#endif
......@@ -95,9 +97,8 @@
/* Operations that can be performed on a pretimout. */
#define WDOG_PREOP_NONE 0
#define WDOG_PREOP_PANIC 1
#define WDOG_PREOP_GIVE_DATA 2 /* Cause data to be available to
read. Doesn't work in NMI
mode. */
/* Cause data to be available to read. Doesn't work in NMI mode. */
#define WDOG_PREOP_GIVE_DATA 2
/* Actions to perform on a full timeout. */
#define WDOG_SET_TIMEOUT_ACT(byte, use) \
......@@ -108,8 +109,10 @@
#define WDOG_TIMEOUT_POWER_DOWN 2
#define WDOG_TIMEOUT_POWER_CYCLE 3
/* Byte 3 of the get command, byte 4 of the get response is the
pre-timeout in seconds. */
/*
* Byte 3 of the get command, byte 4 of the get response is the
* pre-timeout in seconds.
*/
/* Bits for setting byte 4 of the set command, byte 5 of the get response. */
#define WDOG_EXPIRE_CLEAR_BIOS_FRB2 (1 << 1)
......@@ -118,11 +121,13 @@
#define WDOG_EXPIRE_CLEAR_SMS_OS (1 << 4)
#define WDOG_EXPIRE_CLEAR_OEM (1 << 5)
/* Setting/getting the watchdog timer value. This is for bytes 5 and
6 (the timeout time) of the set command, and bytes 6 and 7 (the
timeout time) and 8 and 9 (the current countdown value) of the
response. The timeout value is given in seconds (in the command it
is 100ms intervals). */
/*
* Setting/getting the watchdog timer value. This is for bytes 5 and
* 6 (the timeout time) of the set command, and bytes 6 and 7 (the
* timeout time) and 8 and 9 (the current countdown value) of the
* response. The timeout value is given in seconds (in the command it
* is 100ms intervals).
*/
#define WDOG_SET_TIMEOUT(byte1, byte2, val) \
(byte1) = (((val) * 10) & 0xff), (byte2) = (((val) * 10) >> 8)
#define WDOG_GET_TIMEOUT(byte1, byte2) \
......@@ -184,8 +189,10 @@ static int ipmi_set_timeout(int do_heartbeat);
static void ipmi_register_watchdog(int ipmi_intf);
static void ipmi_unregister_watchdog(int ipmi_intf);
/* If true, the driver will start running as soon as it is configured
and ready. */
/*
* If true, the driver will start running as soon as it is configured
* and ready.
*/
static int start_now;
static int set_param_int(const char *val, struct kernel_param *kp)
......@@ -309,10 +316,12 @@ static int ipmi_ignore_heartbeat;
/* Is someone using the watchdog? Only one user is allowed. */
static unsigned long ipmi_wdog_open;
/* If set to 1, the heartbeat command will set the state to reset and
start the timer. The timer doesn't normally run when the driver is
first opened until the heartbeat is set the first time, this
variable is used to accomplish this. */
/*
* If set to 1, the heartbeat command will set the state to reset and
* start the timer. The timer doesn't normally run when the driver is
* first opened until the heartbeat is set the first time, this
* variable is used to accomplish this.
*/
static int ipmi_start_timer_on_heartbeat;
/* IPMI version of the BMC. */
......@@ -329,10 +338,12 @@ static int nmi_handler_registered;
static int ipmi_heartbeat(void);
/* We use a mutex to make sure that only one thing can send a set
timeout at one time, because we only have one copy of the data.
The mutex is claimed when the set_timeout is sent and freed
when both messages are free. */
/*
* We use a mutex to make sure that only one thing can send a set
* timeout at one time, because we only have one copy of the data.
* The mutex is claimed when the set_timeout is sent and freed
* when both messages are free.
*/
static atomic_t set_timeout_tofree = ATOMIC_INIT(0);
static DEFINE_MUTEX(set_timeout_lock);
static DECLARE_COMPLETION(set_timeout_wait);
......@@ -346,15 +357,13 @@ static void set_timeout_free_recv(struct ipmi_recv_msg *msg)
if (atomic_dec_and_test(&set_timeout_tofree))
complete(&set_timeout_wait);
}
static struct ipmi_smi_msg set_timeout_smi_msg =
{
static struct ipmi_smi_msg set_timeout_smi_msg = {
.done = set_timeout_free_smi
};
static struct ipmi_recv_msg set_timeout_recv_msg =
{
static struct ipmi_recv_msg set_timeout_recv_msg = {
.done = set_timeout_free_recv
};
static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg,
struct ipmi_recv_msg *recv_msg,
int *send_heartbeat_now)
......@@ -373,13 +382,14 @@ static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg,
WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS);
if ((ipmi_version_major > 1)
|| ((ipmi_version_major == 1) && (ipmi_version_minor >= 5)))
{
|| ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) {
/* This is an IPMI 1.5-only feature. */
data[0] |= WDOG_DONT_STOP_ON_SET;
} else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
/* In ipmi 1.0, setting the timer stops the watchdog, we
need to start it back up again. */
/*
* In ipmi 1.0, setting the timer stops the watchdog, we
* need to start it back up again.
*/
hbnow = 1;
}
......@@ -465,12 +475,10 @@ static void panic_recv_free(struct ipmi_recv_msg *msg)
atomic_dec(&panic_done_count);
}
static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg =
{
static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = {
.done = panic_smi_free
};
static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg =
{
static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = {
.done = panic_recv_free
};
......@@ -480,8 +488,10 @@ static void panic_halt_ipmi_heartbeat(void)
struct ipmi_system_interface_addr addr;
int rv;
/* Don't reset the timer if we have the timer turned off, that
re-enables the watchdog. */
/*
* Don't reset the timer if we have the timer turned off, that
* re-enables the watchdog.
*/
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE)
return;
......@@ -505,19 +515,19 @@ static void panic_halt_ipmi_heartbeat(void)
atomic_add(2, &panic_done_count);
}
static struct ipmi_smi_msg panic_halt_smi_msg =
{
static struct ipmi_smi_msg panic_halt_smi_msg = {
.done = panic_smi_free
};
static struct ipmi_recv_msg panic_halt_recv_msg =
{
static struct ipmi_recv_msg panic_halt_recv_msg = {
.done = panic_recv_free
};
/* Special call, doesn't claim any locks. This is only to be called
at panic or halt time, in run-to-completion mode, when the caller
is the only CPU and the only thing that will be going is these IPMI
calls. */
/*
* Special call, doesn't claim any locks. This is only to be called
* at panic or halt time, in run-to-completion mode, when the caller
* is the only CPU and the only thing that will be going is these IPMI
* calls.
*/
static void panic_halt_ipmi_set_timeout(void)
{
int send_heartbeat_now;
......@@ -540,10 +550,12 @@ static void panic_halt_ipmi_set_timeout(void)
ipmi_poll_interface(watchdog_user);
}
/* We use a semaphore to make sure that only one thing can send a
heartbeat at one time, because we only have one copy of the data.
The semaphore is claimed when the set_timeout is sent and freed
when both messages are free. */
/*
* We use a mutex to make sure that only one thing can send a
* heartbeat at one time, because we only have one copy of the data.
* The semaphore is claimed when the set_timeout is sent and freed
* when both messages are free.
*/
static atomic_t heartbeat_tofree = ATOMIC_INIT(0);
static DEFINE_MUTEX(heartbeat_lock);
static DECLARE_COMPLETION(heartbeat_wait);
......@@ -557,15 +569,13 @@ static void heartbeat_free_recv(struct ipmi_recv_msg *msg)
if (atomic_dec_and_test(&heartbeat_tofree))
complete(&heartbeat_wait);
}
static struct ipmi_smi_msg heartbeat_smi_msg =
{
static struct ipmi_smi_msg heartbeat_smi_msg = {
.done = heartbeat_free_smi
};
static struct ipmi_recv_msg heartbeat_recv_msg =
{
static struct ipmi_recv_msg heartbeat_recv_msg = {
.done = heartbeat_free_recv
};
static int ipmi_heartbeat(void)
{
struct kernel_ipmi_msg msg;
......@@ -580,10 +590,12 @@ static int ipmi_heartbeat(void)
ipmi_watchdog_state = action_val;
return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
} else if (pretimeout_since_last_heartbeat) {
/* A pretimeout occurred, make sure we set the timeout.
We don't want to set the action, though, we want to
leave that alone (thus it can't be combined with the
above operation. */
/*
* A pretimeout occurred, make sure we set the timeout.
* We don't want to set the action, though, we want to
* leave that alone (thus it can't be combined with the
* above operation.
*/
return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
}
......@@ -591,8 +603,10 @@ static int ipmi_heartbeat(void)
atomic_set(&heartbeat_tofree, 2);
/* Don't reset the timer if we have the timer turned off, that
re-enables the watchdog. */
/*
* Don't reset the timer if we have the timer turned off, that
* re-enables the watchdog.
*/
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) {
mutex_unlock(&heartbeat_lock);
return 0;
......@@ -625,10 +639,12 @@ static int ipmi_heartbeat(void)
wait_for_completion(&heartbeat_wait);
if (heartbeat_recv_msg.msg.data[0] != 0) {
/* Got an error in the heartbeat response. It was already
reported in ipmi_wdog_msg_handler, but we should return
an error here. */
rv = -EINVAL;
/*
* Got an error in the heartbeat response. It was already
* reported in ipmi_wdog_msg_handler, but we should return
* an error here.
*/
rv = -EINVAL;
}
mutex_unlock(&heartbeat_lock);
......@@ -636,8 +652,7 @@ static int ipmi_heartbeat(void)
return rv;
}
static struct watchdog_info ident =
{
static struct watchdog_info ident = {
.options = 0, /* WDIOF_SETTIMEOUT, */
.firmware_version = 1,
.identity = "IPMI"
......@@ -650,7 +665,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file,
int i;
int val;
switch(cmd) {
switch (cmd) {
case WDIOC_GETSUPPORT:
i = copy_to_user(argp, &ident, sizeof(ident));
return i ? -EFAULT : 0;
......@@ -690,15 +705,13 @@ static int ipmi_ioctl(struct inode *inode, struct file *file,
i = copy_from_user(&val, argp, sizeof(int));
if (i)
return -EFAULT;
if (val & WDIOS_DISABLECARD)
{
if (val & WDIOS_DISABLECARD) {
ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
ipmi_start_timer_on_heartbeat = 0;
}
if (val & WDIOS_ENABLECARD)
{
if (val & WDIOS_ENABLECARD) {
ipmi_watchdog_state = action_val;
ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
}
......@@ -724,13 +737,13 @@ static ssize_t ipmi_write(struct file *file,
int rv;
if (len) {
if (!nowayout) {
size_t i;
if (!nowayout) {
size_t i;
/* In case it was set long ago */
expect_close = 0;
for (i = 0; i != len; i++) {
for (i = 0; i != len; i++) {
char c;
if (get_user(c, buf + i))
......@@ -758,15 +771,17 @@ static ssize_t ipmi_read(struct file *file,
if (count <= 0)
return 0;
/* Reading returns if the pretimeout has gone off, and it only does
it once per pretimeout. */
/*
* Reading returns if the pretimeout has gone off, and it only does
* it once per pretimeout.
*/
spin_lock(&ipmi_read_lock);
if (!data_to_read) {
if (file->f_flags & O_NONBLOCK) {
rv = -EAGAIN;
goto out;
}
init_waitqueue_entry(&wait, current);
add_wait_queue(&read_q, &wait);
while (!data_to_read) {
......@@ -776,7 +791,7 @@ static ssize_t ipmi_read(struct file *file,
spin_lock(&ipmi_read_lock);
}
remove_wait_queue(&read_q, &wait);
if (signal_pending(current)) {
rv = -ERESTARTSYS;
goto out;
......@@ -799,25 +814,27 @@ static ssize_t ipmi_read(struct file *file,
static int ipmi_open(struct inode *ino, struct file *filep)
{
switch (iminor(ino)) {
case WATCHDOG_MINOR:
switch (iminor(ino)) {
case WATCHDOG_MINOR:
if (test_and_set_bit(0, &ipmi_wdog_open))
return -EBUSY;
return -EBUSY;
/* Don't start the timer now, let it start on the
first heartbeat. */
/*
* Don't start the timer now, let it start on the
* first heartbeat.
*/
ipmi_start_timer_on_heartbeat = 1;
return nonseekable_open(ino, filep);
default:
return (-ENODEV);
}
}
}
static unsigned int ipmi_poll(struct file *file, poll_table *wait)
{
unsigned int mask = 0;
poll_wait(file, &read_q, wait);
spin_lock(&ipmi_read_lock);
......@@ -851,7 +868,7 @@ static int ipmi_close(struct inode *ino, struct file *filep)
clear_bit(0, &ipmi_wdog_open);
}
ipmi_fasync (-1, filep, 0);
ipmi_fasync(-1, filep, 0);
expect_close = 0;
return 0;
......@@ -882,7 +899,7 @@ static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg,
msg->msg.data[0],
msg->msg.cmd);
}
ipmi_free_recv_msg(msg);
}
......@@ -902,14 +919,14 @@ static void ipmi_wdog_pretimeout_handler(void *handler_data)
}
}
/* On some machines, the heartbeat will give
an error and not work unless we re-enable
the timer. So do so. */
/*
* On some machines, the heartbeat will give an error and not
* work unless we re-enable the timer. So do so.
*/
pretimeout_since_last_heartbeat = 1;
}
static struct ipmi_user_hndl ipmi_hndlrs =
{
static struct ipmi_user_hndl ipmi_hndlrs = {
.ipmi_recv_hndl = ipmi_wdog_msg_handler,
.ipmi_watchdog_pretimeout = ipmi_wdog_pretimeout_handler
};
......@@ -949,8 +966,10 @@ static void ipmi_register_watchdog(int ipmi_intf)
int old_timeout = timeout;
int old_preop_val = preop_val;
/* Set the pretimeout to go off in a second and give
ourselves plenty of time to stop the timer. */
/*
* Set the pretimeout to go off in a second and give
* ourselves plenty of time to stop the timer.
*/
ipmi_watchdog_state = WDOG_TIMEOUT_RESET;
preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */
pretimeout = 99;
......@@ -974,7 +993,7 @@ static void ipmi_register_watchdog(int ipmi_intf)
" occur. The NMI pretimeout will"
" likely not work\n");
}
out_restore:
out_restore:
testing_nmi = 0;
preop_val = old_preop_val;
pretimeout = old_pretimeout;
......@@ -1009,9 +1028,11 @@ static void ipmi_unregister_watchdog(int ipmi_intf)
/* Make sure no one can call us any more. */
misc_deregister(&ipmi_wdog_miscdev);
/* Wait to make sure the message makes it out. The lower layer has
pointers to our buffers, we want to make sure they are done before
we release our memory. */
/*
* Wait to make sure the message makes it out. The lower layer has
* pointers to our buffers, we want to make sure they are done before
* we release our memory.
*/
while (atomic_read(&set_timeout_tofree))
schedule_timeout_uninterruptible(1);
......@@ -1052,15 +1073,17 @@ ipmi_nmi(struct notifier_block *self, unsigned long val, void *data)
return NOTIFY_STOP;
}
/* If we are not expecting a timeout, ignore it. */
/* If we are not expecting a timeout, ignore it. */
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE)
return NOTIFY_OK;
if (preaction_val != WDOG_PRETIMEOUT_NMI)
return NOTIFY_OK;
/* If no one else handled the NMI, we assume it was the IPMI
watchdog. */
/*
* If no one else handled the NMI, we assume it was the IPMI
* watchdog.
*/
if (preop_val == WDOG_PREOP_PANIC) {
/* On some machines, the heartbeat will give
an error and not work unless we re-enable
......@@ -1082,7 +1105,7 @@ static int wdog_reboot_handler(struct notifier_block *this,
unsigned long code,
void *unused)
{
static int reboot_event_handled = 0;
static int reboot_event_handled;
if ((watchdog_user) && (!reboot_event_handled)) {
/* Make sure we only do this once. */
......@@ -1115,7 +1138,7 @@ static int wdog_panic_handler(struct notifier_block *this,
unsigned long event,
void *unused)
{
static int panic_event_handled = 0;
static int panic_event_handled;
/* On a panic, if we have a panic timeout, make sure to extend
the watchdog timer to a reasonable value to complete the
......@@ -1125,7 +1148,7 @@ static int wdog_panic_handler(struct notifier_block *this,
ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
/* Make sure we do this only once. */
panic_event_handled = 1;
timeout = 255;
pretimeout = 0;
panic_halt_ipmi_set_timeout();
......@@ -1151,8 +1174,7 @@ static void ipmi_smi_gone(int if_num)
ipmi_unregister_watchdog(if_num);
}
static struct ipmi_smi_watcher smi_watcher =
{
static struct ipmi_smi_watcher smi_watcher = {
.owner = THIS_MODULE,
.new_smi = ipmi_new_smi,
.smi_gone = ipmi_smi_gone
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或