m68knommu: switch 68328 timer to use GENERIC_TIME

Switch the 68328 CPU timer code to using GENERIC_TIME.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/m68knommu/platform/68328/timers.c

@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/clocksource.h>
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -51,6 +52,19 @@
 #define TICKS_PER_JIFFY	10
 #endif
 
+static u32 m68328_tick_cnt;
+
+/***************************************************************************/
+
+static irqreturn_t hw_tick(int irq, void *dummy)
+{
+	/* Reset Timer1 */
+	TSTAT &= 0;
+
+	m68328_tick_cnt += TICKS_PER_JIFFY;
+	return arch_timer_interrupt(irq, dummy);
+}
+
 /***************************************************************************/
 
 static irqreturn_t hw_tick(int irq, void *dummy)
@@ -69,6 +83,33 @@ static struct irqaction m68328_timer_irq = {
 	.handler = hw_tick,
 };
 
+/***************************************************************************/
+
+static cycle_t m68328_read_clk(void)
+{
+	unsigned long flags;
+	u32 cycles;
+
+	local_irq_save(flags);
+	cycles = m68328_tick_cnt + TCN;
+	local_irq_restore(flags);
+
+	return cycles;
+}
+
+/***************************************************************************/
+
+static struct clocksource m68328_clk = {
+	.name	= "timer",
+	.rating	= 250,
+	.read	= m68328_read_clk,
+	.shift	= 20,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/***************************************************************************/
+
 void hw_timer_init(void)
 {
 	/* disable timer 1 */
@@ -84,19 +125,8 @@ void hw_timer_init(void)
 
 	/* Enable timer 1 */
 	TCTL |= TCTL_TEN;
-}
-
-/***************************************************************************/
-
-unsigned long hw_timer_offset(void)
-{
-	unsigned long ticks = TCN, offset = 0;
-
-	/* check for pending interrupt */
-	if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM)))
-		offset = 1000000 / HZ;
-	ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY;
-	return ticks + offset;
+	m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
+	clocksource_register(&m68328_clk);
 }
 
 /***************************************************************************/