Revert "ARM: dts: stm32: add CAN support on stm32f746"

This reverts commit 0920ccdf.

The commit 0920ccdf ("ARM: dts: stm32: add CAN support on
stm32f746") depends on the patch "dt-bindings: mfd: stm32f7: add
binding definition for CAN3" [1], which is not in net/main, yet. This
results in a parsing error of "stm32f746.dtsi".

So revert this commit.

[1] https://lore.kernel.org/all/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com

Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305172108.x5acbaQG-lkp@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202305172130.eGGEUhpi-lkp@intel.com
Fixes: 0920ccdf ("ARM: dts: stm32: add CAN support on stm32f746")
Suggested-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20230517181950.1106697-1-mkl@pengutronix.deSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

arch/arm/boot/dts/stm32f746.dtsi

@@ -257,23 +257,6 @@
 			status = "disabled";
 		};
 
-		can3: can@40003400 {
-			compatible = "st,stm32f4-bxcan";
-			reg = <0x40003400 0x200>;
-			interrupts = <104>, <105>, <106>, <107>;
-			interrupt-names = "tx", "rx0", "rx1", "sce";
-			resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
-			st,gcan = <&gcan3>;
-			status = "disabled";
-		};
-
-		gcan3: gcan@40003600 {
-			compatible = "st,stm32f4-gcan", "syscon";
-			reg = <0x40003600 0x200>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
-		};
-
 		usart2: serial@40004400 {
 			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
@@ -354,36 +337,6 @@
 			status = "disabled";
 		};
 
-		can1: can@40006400 {
-			compatible = "st,stm32f4-bxcan";
-			reg = <0x40006400 0x200>;
-			interrupts = <19>, <20>, <21>, <22>;
-			interrupt-names = "tx", "rx0", "rx1", "sce";
-			resets = <&rcc STM32F7_APB1_RESET(CAN1)>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
-			st,can-primary;
-			st,gcan = <&gcan1>;
-			status = "disabled";
-		};
-
-		gcan1: gcan@40006600 {
-			compatible = "st,stm32f4-gcan", "syscon";
-			reg = <0x40006600 0x200>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
-		};
-
-		can2: can@40006800 {
-			compatible = "st,stm32f4-bxcan";
-			reg = <0x40006800 0x200>;
-			interrupts = <63>, <64>, <65>, <66>;
-			interrupt-names = "tx", "rx0", "rx1", "sce";
-			resets = <&rcc STM32F7_APB1_RESET(CAN2)>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN2)>;
-			st,can-secondary;
-			st,gcan = <&gcan1>;
-			status = "disabled";
-		};
-
 		cec: cec@40006c00 {
 			compatible = "st,stm32-cec";
 			reg = <0x40006C00 0x400>;