提交 3627126c 编写于 作者: T Takeshi Kihara 提交者: Geert Uytterhoeven

pinctrl: sh-pfc: r8a7795-es1: Add USB3.0 host support

This patch adds USB3{0,1} (USB3.0 host) pinmux support to R8A7795 ES1.x
SoC.
Signed-off-by: NTakeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
上级 f814def5
......@@ -3101,6 +3101,23 @@ static const unsigned int pwm6_b_mux[] = {
PWM6_B_MARK,
};
/* - USB30 ------------------------------------------------------------------ */
static const unsigned int usb30_pins[] = {
/* PWEN, OVC */
RCAR_GP_PIN(6, 28), RCAR_GP_PIN(6, 29),
};
static const unsigned int usb30_mux[] = {
USB30_PWEN_MARK, USB30_OVC_MARK,
};
/* - USB31 ------------------------------------------------------------------ */
static const unsigned int usb31_pins[] = {
/* PWEN, OVC */
RCAR_GP_PIN(6, 30), RCAR_GP_PIN(6, 31),
};
static const unsigned int usb31_mux[] = {
USB31_PWEN_MARK, USB31_OVC_MARK,
};
/* - QSPI0 ------------------------------------------------------------------ */
static const unsigned int qspi0_ctrl_pins[] = {
/* QSPI0_SPCLK, QSPI0_SSL */
......@@ -4080,6 +4097,8 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(usb0),
SH_PFC_PIN_GROUP(usb1),
SH_PFC_PIN_GROUP(usb2),
SH_PFC_PIN_GROUP(usb30),
SH_PFC_PIN_GROUP(usb31),
};
static const char * const audio_clk_groups[] = {
......@@ -4537,6 +4556,14 @@ static const char * const usb2_groups[] = {
"usb2",
};
static const char * const usb30_groups[] = {
"usb30",
};
static const char * const usb31_groups[] = {
"usb31",
};
static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(audio_clk),
SH_PFC_FUNCTION(avb),
......@@ -4588,6 +4615,8 @@ static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(usb0),
SH_PFC_FUNCTION(usb1),
SH_PFC_FUNCTION(usb2),
SH_PFC_FUNCTION(usb30),
SH_PFC_FUNCTION(usb31),
};
static const struct pinmux_cfg_reg pinmux_config_regs[] = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册