提交 35d210fa 编写于 作者: P Peter Ujfalusi 提交者: Liam Girdwood

ASoC: omap-mcbsp: Use the common interrupt line if supported by the SoC

With the common irq the driver only needs to use one interrupt line, and
it provides better debugging possibilites compared to the legacy TX/RX
interrupt lines.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>
上级 09fa37ac
......@@ -109,6 +109,47 @@ static void omap_mcbsp_dump_reg(struct omap_mcbsp *mcbsp)
dev_dbg(mcbsp->dev, "***********************\n");
}
static irqreturn_t omap_mcbsp_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp = dev_id;
u16 irqst;
irqst = MCBSP_READ(mcbsp, IRQST);
dev_dbg(mcbsp->dev, "IRQ callback : 0x%x\n", irqst);
if (irqst & RSYNCERREN)
dev_err(mcbsp->dev, "RX Frame Sync Error!\n");
if (irqst & RFSREN)
dev_dbg(mcbsp->dev, "RX Frame Sync\n");
if (irqst & REOFEN)
dev_dbg(mcbsp->dev, "RX End Of Frame\n");
if (irqst & RRDYEN)
dev_dbg(mcbsp->dev, "RX Buffer Threshold Reached\n");
if (irqst & RUNDFLEN)
dev_err(mcbsp->dev, "RX Buffer Underflow!\n");
if (irqst & ROVFLEN)
dev_err(mcbsp->dev, "RX Buffer Overflow!\n");
if (irqst & XSYNCERREN)
dev_err(mcbsp->dev, "TX Frame Sync Error!\n");
if (irqst & XFSXEN)
dev_dbg(mcbsp->dev, "TX Frame Sync\n");
if (irqst & XEOFEN)
dev_dbg(mcbsp->dev, "TX End Of Frame\n");
if (irqst & XRDYEN)
dev_dbg(mcbsp->dev, "TX Buffer threshold Reached\n");
if (irqst & XUNDFLEN)
dev_err(mcbsp->dev, "TX Buffer Underflow!\n");
if (irqst & XOVFLEN)
dev_err(mcbsp->dev, "TX Buffer Overflow!\n");
if (irqst & XEMPTYEOFEN)
dev_dbg(mcbsp->dev, "TX Buffer empty at end of frame\n");
MCBSP_WRITE(mcbsp, IRQST, irqst);
return IRQ_HANDLED;
}
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_tx = dev_id;
......@@ -176,6 +217,10 @@ void omap_mcbsp_config(struct omap_mcbsp *mcbsp,
/* Enable wakeup behavior */
if (mcbsp->pdata->has_wakeup)
MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
/* Enable TX/RX sync error interrupts by default */
if (mcbsp->irq)
MCBSP_WRITE(mcbsp, IRQEN, RSYNCERREN | XSYNCERREN);
}
/**
......@@ -489,23 +534,25 @@ int omap_mcbsp_request(struct omap_mcbsp *mcbsp)
MCBSP_WRITE(mcbsp, SPCR1, 0);
MCBSP_WRITE(mcbsp, SPCR2, 0);
err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
0, "McBSP", (void *)mcbsp);
if (err != 0) {
dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
"for McBSP%d\n", mcbsp->tx_irq,
mcbsp->id);
goto err_clk_disable;
}
if (mcbsp->irq) {
err = request_irq(mcbsp->irq, omap_mcbsp_irq_handler, 0,
"McBSP", (void *)mcbsp);
if (err != 0) {
dev_err(mcbsp->dev, "Unable to request IRQ\n");
goto err_clk_disable;
}
} else {
err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, 0,
"McBSP TX", (void *)mcbsp);
if (err != 0) {
dev_err(mcbsp->dev, "Unable to request TX IRQ\n");
goto err_clk_disable;
}
if (mcbsp->rx_irq) {
err = request_irq(mcbsp->rx_irq,
omap_mcbsp_rx_irq_handler,
0, "McBSP", (void *)mcbsp);
err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, 0,
"McBSP RX", (void *)mcbsp);
if (err != 0) {
dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
"for McBSP%d\n", mcbsp->rx_irq,
mcbsp->id);
dev_err(mcbsp->dev, "Unable to request RX IRQ\n");
goto err_free_irq;
}
}
......@@ -542,9 +589,16 @@ void omap_mcbsp_free(struct omap_mcbsp *mcbsp)
if (mcbsp->pdata->has_wakeup)
MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
if (mcbsp->rx_irq)
/* Disable interrupt requests */
if (mcbsp->irq)
MCBSP_WRITE(mcbsp, IRQEN, 0);
if (mcbsp->irq) {
free_irq(mcbsp->irq, (void *)mcbsp);
} else {
free_irq(mcbsp->rx_irq, (void *)mcbsp);
free_irq(mcbsp->tx_irq, (void *)mcbsp);
free_irq(mcbsp->tx_irq, (void *)mcbsp);
}
reg_cache = mcbsp->reg_cache;
......@@ -949,13 +1003,24 @@ int __devinit omap_mcbsp_init(struct platform_device *pdev)
else
mcbsp->phys_dma_base = res->start;
mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
/* From OMAP4 there will be a single irq line */
if (mcbsp->tx_irq == -ENXIO) {
mcbsp->tx_irq = platform_get_irq(pdev, 0);
mcbsp->rx_irq = 0;
/*
* OMAP1, 2 uses two interrupt lines: TX, RX
* OMAP2430, OMAP3 SoC have combined IRQ line as well.
* OMAP4 and newer SoC only have the combined IRQ line.
* Use the combined IRQ if available since it gives better debugging
* possibilities.
*/
mcbsp->irq = platform_get_irq_byname(pdev, "common");
if (mcbsp->irq == -ENXIO) {
mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
if (mcbsp->tx_irq == -ENXIO) {
mcbsp->irq = platform_get_irq(pdev, 0);
mcbsp->tx_irq = 0;
} else {
mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
mcbsp->irq = 0;
}
}
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
......
......@@ -218,15 +218,19 @@ enum {
#define MCBSP_DMA_MODE_ELEMENT 0
#define MCBSP_DMA_MODE_THRESHOLD 1
/********************** McBSP WAKEUPEN bit definitions *********************/
/********************** McBSP WAKEUPEN/IRQST/IRQEN bit definitions *********/
#define RSYNCERREN BIT(0)
#define RFSREN BIT(1)
#define REOFEN BIT(2)
#define RRDYEN BIT(3)
#define RUNDFLEN BIT(4)
#define ROVFLEN BIT(5)
#define XSYNCERREN BIT(7)
#define XFSXEN BIT(8)
#define XEOFEN BIT(9)
#define XRDYEN BIT(10)
#define XUNDFLEN BIT(11)
#define XOVFLEN BIT(12)
#define XEMPTYEOFEN BIT(14)
/* Clock signal muxing options */
......@@ -294,6 +298,7 @@ struct omap_mcbsp {
int configured;
u8 free;
int irq;
int rx_irq;
int tx_irq;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册