提交 35cb8d9e 编写于 作者: L Linus Torvalds

Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86/fpu changes from Ingo Molnar.

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  i387: Split up <asm/i387.h> into exported and internal interfaces
  i387: Uninline the generic FP helpers that we expose to kernel modules
......@@ -24,6 +24,7 @@
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/ptrace.h>
#include <asm/ia32_unistd.h>
#include <asm/user32.h>
......
/*
* Copyright (C) 1994 Linus Torvalds
*
* Pentium III FXSR, SSE support
* General FPU state handling cleanups
* Gareth Hughes <gareth@valinux.com>, May 2000
* x86-64 work by Andi Kleen 2002
*/
#ifndef _FPU_INTERNAL_H
#define _FPU_INTERNAL_H
#include <linux/kernel_stat.h>
#include <linux/regset.h>
#include <linux/slab.h>
#include <asm/asm.h>
#include <asm/cpufeature.h>
#include <asm/processor.h>
#include <asm/sigcontext.h>
#include <asm/user.h>
#include <asm/uaccess.h>
#include <asm/xsave.h>
extern unsigned int sig_xstate_size;
extern void fpu_init(void);
DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
xstateregs_get;
extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
xstateregs_set;
/*
* xstateregs_active == fpregs_active. Please refer to the comment
* at the definition of fpregs_active.
*/
#define xstateregs_active fpregs_active
extern struct _fpx_sw_bytes fx_sw_reserved;
#ifdef CONFIG_IA32_EMULATION
extern unsigned int sig_xstate_ia32_size;
extern struct _fpx_sw_bytes fx_sw_reserved_ia32;
struct _fpstate_ia32;
struct _xstate_ia32;
extern int save_i387_xstate_ia32(void __user *buf);
extern int restore_i387_xstate_ia32(void __user *buf);
#endif
#ifdef CONFIG_MATH_EMULATION
extern void finit_soft_fpu(struct i387_soft_struct *soft);
#else
static inline void finit_soft_fpu(struct i387_soft_struct *soft) {}
#endif
#define X87_FSW_ES (1 << 7) /* Exception Summary */
static __always_inline __pure bool use_xsaveopt(void)
{
return static_cpu_has(X86_FEATURE_XSAVEOPT);
}
static __always_inline __pure bool use_xsave(void)
{
return static_cpu_has(X86_FEATURE_XSAVE);
}
static __always_inline __pure bool use_fxsr(void)
{
return static_cpu_has(X86_FEATURE_FXSR);
}
extern void __sanitize_i387_state(struct task_struct *);
static inline void sanitize_i387_state(struct task_struct *tsk)
{
if (!use_xsaveopt())
return;
__sanitize_i387_state(tsk);
}
#ifdef CONFIG_X86_64
static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
{
int err;
/* See comment in fxsave() below. */
#ifdef CONFIG_AS_FXSAVEQ
asm volatile("1: fxrstorq %[fx]\n\t"
"2:\n"
".section .fixup,\"ax\"\n"
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err)
: [fx] "m" (*fx), "0" (0));
#else
asm volatile("1: rex64/fxrstor (%[fx])\n\t"
"2:\n"
".section .fixup,\"ax\"\n"
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err)
: [fx] "R" (fx), "m" (*fx), "0" (0));
#endif
return err;
}
static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
{
int err;
/*
* Clear the bytes not touched by the fxsave and reserved
* for the SW usage.
*/
err = __clear_user(&fx->sw_reserved,
sizeof(struct _fpx_sw_bytes));
if (unlikely(err))
return -EFAULT;
/* See comment in fxsave() below. */
#ifdef CONFIG_AS_FXSAVEQ
asm volatile("1: fxsaveq %[fx]\n\t"
"2:\n"
".section .fixup,\"ax\"\n"
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err), [fx] "=m" (*fx)
: "0" (0));
#else
asm volatile("1: rex64/fxsave (%[fx])\n\t"
"2:\n"
".section .fixup,\"ax\"\n"
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err), "=m" (*fx)
: [fx] "R" (fx), "0" (0));
#endif
if (unlikely(err) &&
__clear_user(fx, sizeof(struct i387_fxsave_struct)))
err = -EFAULT;
/* No need to clear here because the caller clears USED_MATH */
return err;
}
static inline void fpu_fxsave(struct fpu *fpu)
{
/* Using "rex64; fxsave %0" is broken because, if the memory operand
uses any extended registers for addressing, a second REX prefix
will be generated (to the assembler, rex64 followed by semicolon
is a separate instruction), and hence the 64-bitness is lost. */
#ifdef CONFIG_AS_FXSAVEQ
/* Using "fxsaveq %0" would be the ideal choice, but is only supported
starting with gas 2.16. */
__asm__ __volatile__("fxsaveq %0"
: "=m" (fpu->state->fxsave));
#else
/* Using, as a workaround, the properly prefixed form below isn't
accepted by any binutils version so far released, complaining that
the same type of prefix is used twice if an extended register is
needed for addressing (fix submitted to mainline 2005-11-21).
asm volatile("rex64/fxsave %0"
: "=m" (fpu->state->fxsave));
This, however, we can work around by forcing the compiler to select
an addressing mode that doesn't require extended registers. */
asm volatile("rex64/fxsave (%[fx])"
: "=m" (fpu->state->fxsave)
: [fx] "R" (&fpu->state->fxsave));
#endif
}
#else /* CONFIG_X86_32 */
/* perform fxrstor iff the processor has extended states, otherwise frstor */
static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
{
/*
* The "nop" is needed to make the instructions the same
* length.
*/
alternative_input(
"nop ; frstor %1",
"fxrstor %1",
X86_FEATURE_FXSR,
"m" (*fx));
return 0;
}
static inline void fpu_fxsave(struct fpu *fpu)
{
asm volatile("fxsave %[fx]"
: [fx] "=m" (fpu->state->fxsave));
}
#endif /* CONFIG_X86_64 */
/*
* These must be called with preempt disabled. Returns
* 'true' if the FPU state is still intact.
*/
static inline int fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
fpu_xsave(fpu);
/*
* xsave header may indicate the init state of the FP.
*/
if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
return 1;
} else if (use_fxsr()) {
fpu_fxsave(fpu);
} else {
asm volatile("fnsave %[fx]; fwait"
: [fx] "=m" (fpu->state->fsave));
return 0;
}
/*
* If exceptions are pending, we need to clear them so
* that we don't randomly get exceptions later.
*
* FIXME! Is this perhaps only true for the old-style
* irq13 case? Maybe we could leave the x87 state
* intact otherwise?
*/
if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
asm volatile("fnclex");
return 0;
}
return 1;
}
static inline int __save_init_fpu(struct task_struct *tsk)
{
return fpu_save_init(&tsk->thread.fpu);
}
static inline int fpu_fxrstor_checking(struct fpu *fpu)
{
return fxrstor_checking(&fpu->state->fxsave);
}
static inline int fpu_restore_checking(struct fpu *fpu)
{
if (use_xsave())
return fpu_xrstor_checking(fpu);
else
return fpu_fxrstor_checking(fpu);
}
static inline int restore_fpu_checking(struct task_struct *tsk)
{
/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
is pending. Clear the x87 state here by setting it to fixed
values. "m" is a random variable that should be in L1 */
alternative_input(
ASM_NOP8 ASM_NOP2,
"emms\n\t" /* clear stack tags */
"fildl %P[addr]", /* set F?P to defined value */
X86_FEATURE_FXSAVE_LEAK,
[addr] "m" (tsk->thread.fpu.has_fpu));
return fpu_restore_checking(&tsk->thread.fpu);
}
/*
* Software FPU state helpers. Careful: these need to
* be preemption protection *and* they need to be
* properly paired with the CR0.TS changes!
*/
static inline int __thread_has_fpu(struct task_struct *tsk)
{
return tsk->thread.fpu.has_fpu;
}
/* Must be paired with an 'stts' after! */
static inline void __thread_clear_has_fpu(struct task_struct *tsk)
{
tsk->thread.fpu.has_fpu = 0;
percpu_write(fpu_owner_task, NULL);
}
/* Must be paired with a 'clts' before! */
static inline void __thread_set_has_fpu(struct task_struct *tsk)
{
tsk->thread.fpu.has_fpu = 1;
percpu_write(fpu_owner_task, tsk);
}
/*
* Encapsulate the CR0.TS handling together with the
* software flag.
*
* These generally need preemption protection to work,
* do try to avoid using these on their own.
*/
static inline void __thread_fpu_end(struct task_struct *tsk)
{
__thread_clear_has_fpu(tsk);
stts();
}
static inline void __thread_fpu_begin(struct task_struct *tsk)
{
clts();
__thread_set_has_fpu(tsk);
}
/*
* FPU state switching for scheduling.
*
* This is a two-stage process:
*
* - switch_fpu_prepare() saves the old state and
* sets the new state of the CR0.TS bit. This is
* done within the context of the old process.
*
* - switch_fpu_finish() restores the new state as
* necessary.
*/
typedef struct { int preload; } fpu_switch_t;
/*
* FIXME! We could do a totally lazy restore, but we need to
* add a per-cpu "this was the task that last touched the FPU
* on this CPU" variable, and the task needs to have a "I last
* touched the FPU on this CPU" and check them.
*
* We don't do that yet, so "fpu_lazy_restore()" always returns
* false, but some day..
*/
static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
{
return new == percpu_read_stable(fpu_owner_task) &&
cpu == new->thread.fpu.last_cpu;
}
static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
{
fpu_switch_t fpu;
fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
if (__thread_has_fpu(old)) {
if (!__save_init_fpu(old))
cpu = ~0;
old->thread.fpu.last_cpu = cpu;
old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */
/* Don't change CR0.TS if we just switch! */
if (fpu.preload) {
new->fpu_counter++;
__thread_set_has_fpu(new);
prefetch(new->thread.fpu.state);
} else
stts();
} else {
old->fpu_counter = 0;
old->thread.fpu.last_cpu = ~0;
if (fpu.preload) {
new->fpu_counter++;
if (fpu_lazy_restore(new, cpu))
fpu.preload = 0;
else
prefetch(new->thread.fpu.state);
__thread_fpu_begin(new);
}
}
return fpu;
}
/*
* By the time this gets called, we've already cleared CR0.TS and
* given the process the FPU if we are going to preload the FPU
* state - all we need to do is to conditionally restore the register
* state itself.
*/
static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
{
if (fpu.preload) {
if (unlikely(restore_fpu_checking(new)))
__thread_fpu_end(new);
}
}
/*
* Signal frame handlers...
*/
extern int save_i387_xstate(void __user *buf);
extern int restore_i387_xstate(void __user *buf);
static inline void __clear_fpu(struct task_struct *tsk)
{
if (__thread_has_fpu(tsk)) {
/* Ignore delayed exceptions from user space */
asm volatile("1: fwait\n"
"2:\n"
_ASM_EXTABLE(1b, 2b));
__thread_fpu_end(tsk);
}
}
/*
* The actual user_fpu_begin/end() functions
* need to be preemption-safe.
*
* NOTE! user_fpu_end() must be used only after you
* have saved the FP state, and user_fpu_begin() must
* be used only immediately before restoring it.
* These functions do not do any save/restore on
* their own.
*/
static inline void user_fpu_end(void)
{
preempt_disable();
__thread_fpu_end(current);
preempt_enable();
}
static inline void user_fpu_begin(void)
{
preempt_disable();
if (!user_has_fpu())
__thread_fpu_begin(current);
preempt_enable();
}
/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
WARN_ON_ONCE(!__thread_has_fpu(tsk));
preempt_disable();
__save_init_fpu(tsk);
__thread_fpu_end(tsk);
preempt_enable();
}
static inline void clear_fpu(struct task_struct *tsk)
{
preempt_disable();
__clear_fpu(tsk);
preempt_enable();
}
/*
* i387 state interaction
*/
static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
{
if (cpu_has_fxsr) {
return tsk->thread.fpu.state->fxsave.cwd;
} else {
return (unsigned short)tsk->thread.fpu.state->fsave.cwd;
}
}
static inline unsigned short get_fpu_swd(struct task_struct *tsk)
{
if (cpu_has_fxsr) {
return tsk->thread.fpu.state->fxsave.swd;
} else {
return (unsigned short)tsk->thread.fpu.state->fsave.swd;
}
}
static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
{
if (cpu_has_xmm) {
return tsk->thread.fpu.state->fxsave.mxcsr;
} else {
return MXCSR_DEFAULT;
}
}
static bool fpu_allocated(struct fpu *fpu)
{
return fpu->state != NULL;
}
static inline int fpu_alloc(struct fpu *fpu)
{
if (fpu_allocated(fpu))
return 0;
fpu->state = kmem_cache_alloc(task_xstate_cachep, GFP_KERNEL);
if (!fpu->state)
return -ENOMEM;
WARN_ON((unsigned long)fpu->state & 15);
return 0;
}
static inline void fpu_free(struct fpu *fpu)
{
if (fpu->state) {
kmem_cache_free(task_xstate_cachep, fpu->state);
fpu->state = NULL;
}
}
static inline void fpu_copy(struct fpu *dst, struct fpu *src)
{
memcpy(dst->state, src->state, xstate_size);
}
extern void fpu_finit(struct fpu *fpu);
#endif
......@@ -13,476 +13,19 @@
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/regset.h>
#include <linux/hardirq.h>
#include <linux/slab.h>
#include <asm/asm.h>
#include <asm/cpufeature.h>
#include <asm/processor.h>
#include <asm/sigcontext.h>
#include <asm/user.h>
#include <asm/uaccess.h>
#include <asm/xsave.h>
#include <asm/system.h>
struct pt_regs;
struct user_i387_struct;
extern unsigned int sig_xstate_size;
extern void fpu_init(void);
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
extern void math_state_restore(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
extern void math_state_restore(void);
DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
xstateregs_get;
extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
xstateregs_set;
/*
* xstateregs_active == fpregs_active. Please refer to the comment
* at the definition of fpregs_active.
*/
#define xstateregs_active fpregs_active
extern struct _fpx_sw_bytes fx_sw_reserved;
#ifdef CONFIG_IA32_EMULATION
extern unsigned int sig_xstate_ia32_size;
extern struct _fpx_sw_bytes fx_sw_reserved_ia32;
struct _fpstate_ia32;
struct _xstate_ia32;
extern int save_i387_xstate_ia32(void __user *buf);
extern int restore_i387_xstate_ia32(void __user *buf);
#endif
#ifdef CONFIG_MATH_EMULATION
extern void finit_soft_fpu(struct i387_soft_struct *soft);
#else
static inline void finit_soft_fpu(struct i387_soft_struct *soft) {}
#endif
#define X87_FSW_ES (1 << 7) /* Exception Summary */
static __always_inline __pure bool use_xsaveopt(void)
{
return static_cpu_has(X86_FEATURE_XSAVEOPT);
}
static __always_inline __pure bool use_xsave(void)
{
return static_cpu_has(X86_FEATURE_XSAVE);
}
static __always_inline __pure bool use_fxsr(void)
{
return static_cpu_has(X86_FEATURE_FXSR);
}
extern void __sanitize_i387_state(struct task_struct *);
static inline void sanitize_i387_state(struct task_struct *tsk)
{
if (!use_xsaveopt())
return;
__sanitize_i387_state(tsk);
}
#ifdef CONFIG_X86_64
static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
{
int err;
/* See comment in fxsave() below. */
#ifdef CONFIG_AS_FXSAVEQ
asm volatile("1: fxrstorq %[fx]\n\t"
"2:\n"
".section .fixup,\"ax\"\n"
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err)
: [fx] "m" (*fx), "0" (0));
#else
asm volatile("1: rex64/fxrstor (%[fx])\n\t"
"2:\n"
".section .fixup,\"ax\"\n"
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err)
: [fx] "R" (fx), "m" (*fx), "0" (0));
#endif
return err;
}
static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
{
int err;
/*
* Clear the bytes not touched by the fxsave and reserved
* for the SW usage.
*/
err = __clear_user(&fx->sw_reserved,
sizeof(struct _fpx_sw_bytes));
if (unlikely(err))
return -EFAULT;
/* See comment in fxsave() below. */
#ifdef CONFIG_AS_FXSAVEQ
asm volatile("1: fxsaveq %[fx]\n\t"
"2:\n"
".section .fixup,\"ax\"\n"
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err), [fx] "=m" (*fx)
: "0" (0));
#else
asm volatile("1: rex64/fxsave (%[fx])\n\t"
"2:\n"
".section .fixup,\"ax\"\n"
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err), "=m" (*fx)
: [fx] "R" (fx), "0" (0));
#endif
if (unlikely(err) &&
__clear_user(fx, sizeof(struct i387_fxsave_struct)))
err = -EFAULT;
/* No need to clear here because the caller clears USED_MATH */
return err;
}
static inline void fpu_fxsave(struct fpu *fpu)
{
/* Using "rex64; fxsave %0" is broken because, if the memory operand
uses any extended registers for addressing, a second REX prefix
will be generated (to the assembler, rex64 followed by semicolon
is a separate instruction), and hence the 64-bitness is lost. */
#ifdef CONFIG_AS_FXSAVEQ
/* Using "fxsaveq %0" would be the ideal choice, but is only supported
starting with gas 2.16. */
__asm__ __volatile__("fxsaveq %0"
: "=m" (fpu->state->fxsave));
#else
/* Using, as a workaround, the properly prefixed form below isn't
accepted by any binutils version so far released, complaining that
the same type of prefix is used twice if an extended register is
needed for addressing (fix submitted to mainline 2005-11-21).
asm volatile("rex64/fxsave %0"
: "=m" (fpu->state->fxsave));
This, however, we can work around by forcing the compiler to select
an addressing mode that doesn't require extended registers. */
asm volatile("rex64/fxsave (%[fx])"
: "=m" (fpu->state->fxsave)
: [fx] "R" (&fpu->state->fxsave));
#endif
}
#else /* CONFIG_X86_32 */
/* perform fxrstor iff the processor has extended states, otherwise frstor */
static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
{
/*
* The "nop" is needed to make the instructions the same
* length.
*/
alternative_input(
"nop ; frstor %1",
"fxrstor %1",
X86_FEATURE_FXSR,
"m" (*fx));
return 0;
}
static inline void fpu_fxsave(struct fpu *fpu)
{
asm volatile("fxsave %[fx]"
: [fx] "=m" (fpu->state->fxsave));
}
#endif /* CONFIG_X86_64 */
/*
* These must be called with preempt disabled. Returns
* 'true' if the FPU state is still intact.
*/
static inline int fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
fpu_xsave(fpu);
/*
* xsave header may indicate the init state of the FP.
*/
if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
return 1;
} else if (use_fxsr()) {
fpu_fxsave(fpu);
} else {
asm volatile("fnsave %[fx]; fwait"
: [fx] "=m" (fpu->state->fsave));
return 0;
}
/*
* If exceptions are pending, we need to clear them so
* that we don't randomly get exceptions later.
*
* FIXME! Is this perhaps only true for the old-style
* irq13 case? Maybe we could leave the x87 state
* intact otherwise?
*/
if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
asm volatile("fnclex");
return 0;
}
return 1;
}
static inline int __save_init_fpu(struct task_struct *tsk)
{
return fpu_save_init(&tsk->thread.fpu);
}
static inline int fpu_fxrstor_checking(struct fpu *fpu)
{
return fxrstor_checking(&fpu->state->fxsave);
}
static inline int fpu_restore_checking(struct fpu *fpu)
{
if (use_xsave())
return fpu_xrstor_checking(fpu);
else
return fpu_fxrstor_checking(fpu);
}
static inline int restore_fpu_checking(struct task_struct *tsk)
{
/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
is pending. Clear the x87 state here by setting it to fixed
values. "m" is a random variable that should be in L1 */
alternative_input(
ASM_NOP8 ASM_NOP2,
"emms\n\t" /* clear stack tags */
"fildl %P[addr]", /* set F?P to defined value */
X86_FEATURE_FXSAVE_LEAK,
[addr] "m" (tsk->thread.fpu.has_fpu));
return fpu_restore_checking(&tsk->thread.fpu);
}
/*
* Software FPU state helpers. Careful: these need to
* be preemption protection *and* they need to be
* properly paired with the CR0.TS changes!
*/
static inline int __thread_has_fpu(struct task_struct *tsk)
{
return tsk->thread.fpu.has_fpu;
}
/* Must be paired with an 'stts' after! */
static inline void __thread_clear_has_fpu(struct task_struct *tsk)
{
tsk->thread.fpu.has_fpu = 0;
percpu_write(fpu_owner_task, NULL);
}
/* Must be paired with a 'clts' before! */
static inline void __thread_set_has_fpu(struct task_struct *tsk)
{
tsk->thread.fpu.has_fpu = 1;
percpu_write(fpu_owner_task, tsk);
}
/*
* Encapsulate the CR0.TS handling together with the
* software flag.
*
* These generally need preemption protection to work,
* do try to avoid using these on their own.
*/
static inline void __thread_fpu_end(struct task_struct *tsk)
{
__thread_clear_has_fpu(tsk);
stts();
}
static inline void __thread_fpu_begin(struct task_struct *tsk)
{
clts();
__thread_set_has_fpu(tsk);
}
/*
* FPU state switching for scheduling.
*
* This is a two-stage process:
*
* - switch_fpu_prepare() saves the old state and
* sets the new state of the CR0.TS bit. This is
* done within the context of the old process.
*
* - switch_fpu_finish() restores the new state as
* necessary.
*/
typedef struct { int preload; } fpu_switch_t;
/*
* FIXME! We could do a totally lazy restore, but we need to
* add a per-cpu "this was the task that last touched the FPU
* on this CPU" variable, and the task needs to have a "I last
* touched the FPU on this CPU" and check them.
*
* We don't do that yet, so "fpu_lazy_restore()" always returns
* false, but some day..
*/
static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
{
return new == percpu_read_stable(fpu_owner_task) &&
cpu == new->thread.fpu.last_cpu;
}
static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
{
fpu_switch_t fpu;
fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
if (__thread_has_fpu(old)) {
if (!__save_init_fpu(old))
cpu = ~0;
old->thread.fpu.last_cpu = cpu;
old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */
/* Don't change CR0.TS if we just switch! */
if (fpu.preload) {
new->fpu_counter++;
__thread_set_has_fpu(new);
prefetch(new->thread.fpu.state);
} else
stts();
} else {
old->fpu_counter = 0;
old->thread.fpu.last_cpu = ~0;
if (fpu.preload) {
new->fpu_counter++;
if (fpu_lazy_restore(new, cpu))
fpu.preload = 0;
else
prefetch(new->thread.fpu.state);
__thread_fpu_begin(new);
}
}
return fpu;
}
/*
* By the time this gets called, we've already cleared CR0.TS and
* given the process the FPU if we are going to preload the FPU
* state - all we need to do is to conditionally restore the register
* state itself.
*/
static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
{
if (fpu.preload) {
if (unlikely(restore_fpu_checking(new)))
__thread_fpu_end(new);
}
}
/*
* Signal frame handlers...
*/
extern int save_i387_xstate(void __user *buf);
extern int restore_i387_xstate(void __user *buf);
static inline void __clear_fpu(struct task_struct *tsk)
{
if (__thread_has_fpu(tsk)) {
/* Ignore delayed exceptions from user space */
asm volatile("1: fwait\n"
"2:\n"
_ASM_EXTABLE(1b, 2b));
__thread_fpu_end(tsk);
}
}
/*
* Were we in an interrupt that interrupted kernel mode?
*
* We can do a kernel_fpu_begin/end() pair *ONLY* if that
* pair does nothing at all: the thread must not have fpu (so
* that we don't try to save the FPU state), and TS must
* be set (so that the clts/stts pair does nothing that is
* visible in the interrupted kernel thread).
*/
static inline bool interrupted_kernel_fpu_idle(void)
{
return !__thread_has_fpu(current) &&
(read_cr0() & X86_CR0_TS);
}
/*
* Were we in user mode (or vm86 mode) when we were
* interrupted?
*
* Doing kernel_fpu_begin/end() is ok if we are running
* in an interrupt context from user mode - we'll just
* save the FPU state as required.
*/
static inline bool interrupted_user_mode(void)
{
struct pt_regs *regs = get_irq_regs();
return regs && user_mode_vm(regs);
}
/*
* Can we use the FPU in kernel mode with the
* whole "kernel_fpu_begin/end()" sequence?
*
* It's always ok in process context (ie "not interrupt")
* but it is sometimes ok even from an irq.
*/
static inline bool irq_fpu_usable(void)
{
return !in_interrupt() ||
interrupted_user_mode() ||
interrupted_kernel_fpu_idle();
}
static inline void kernel_fpu_begin(void)
{
struct task_struct *me = current;
WARN_ON_ONCE(!irq_fpu_usable());
preempt_disable();
if (__thread_has_fpu(me)) {
__save_init_fpu(me);
__thread_clear_has_fpu(me);
/* We do 'stts()' in kernel_fpu_end() */
} else {
percpu_write(fpu_owner_task, NULL);
clts();
}
}
static inline void kernel_fpu_end(void)
{
stts();
preempt_enable();
}
extern bool irq_fpu_usable(void);
extern void kernel_fpu_begin(void);
extern void kernel_fpu_end(void);
/*
* Some instructions like VIA's padlock instructions generate a spurious
......@@ -524,126 +67,13 @@ static inline void irq_ts_restore(int TS_state)
* we can just assume we have FPU access - typically
* to save the FP state - we'll just take a #NM
* fault and get the FPU access back.
*
* The actual user_fpu_begin/end() functions
* need to be preemption-safe, though.
*
* NOTE! user_fpu_end() must be used only after you
* have saved the FP state, and user_fpu_begin() must
* be used only immediately before restoring it.
* These functions do not do any save/restore on
* their own.
*/
static inline int user_has_fpu(void)
{
return __thread_has_fpu(current);
}
static inline void user_fpu_end(void)
{
preempt_disable();
__thread_fpu_end(current);
preempt_enable();
}
static inline void user_fpu_begin(void)
{
preempt_disable();
if (!user_has_fpu())
__thread_fpu_begin(current);
preempt_enable();
}
/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
WARN_ON_ONCE(!__thread_has_fpu(tsk));
preempt_disable();
__save_init_fpu(tsk);
__thread_fpu_end(tsk);
preempt_enable();
}
static inline void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
if (__thread_has_fpu(tsk)) {
__save_init_fpu(tsk);
__thread_fpu_end(tsk);
} else
tsk->fpu_counter = 0;
preempt_enable();
}
static inline void clear_fpu(struct task_struct *tsk)
{
preempt_disable();
__clear_fpu(tsk);
preempt_enable();
}
/*
* i387 state interaction
*/
static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
{
if (cpu_has_fxsr) {
return tsk->thread.fpu.state->fxsave.cwd;
} else {
return (unsigned short)tsk->thread.fpu.state->fsave.cwd;
}
}
static inline unsigned short get_fpu_swd(struct task_struct *tsk)
{
if (cpu_has_fxsr) {
return tsk->thread.fpu.state->fxsave.swd;
} else {
return (unsigned short)tsk->thread.fpu.state->fsave.swd;
}
}
static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
{
if (cpu_has_xmm) {
return tsk->thread.fpu.state->fxsave.mxcsr;
} else {
return MXCSR_DEFAULT;
}
}
static bool fpu_allocated(struct fpu *fpu)
{
return fpu->state != NULL;
}
static inline int fpu_alloc(struct fpu *fpu)
{
if (fpu_allocated(fpu))
return 0;
fpu->state = kmem_cache_alloc(task_xstate_cachep, GFP_KERNEL);
if (!fpu->state)
return -ENOMEM;
WARN_ON((unsigned long)fpu->state & 15);
return 0;
}
static inline void fpu_free(struct fpu *fpu)
{
if (fpu->state) {
kmem_cache_free(task_xstate_cachep, fpu->state);
fpu->state = NULL;
}
}
static inline void fpu_copy(struct fpu *dst, struct fpu *src)
{
memcpy(dst->state, src->state, xstate_size);
return current->thread.fpu.has_fpu;
}
extern void fpu_finit(struct fpu *fpu);
extern void unlazy_fpu(struct task_struct *tsk);
#endif /* __ASSEMBLY__ */
......
......@@ -28,6 +28,7 @@
#include <asm/apic.h>
#include <asm/desc.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/mtrr.h>
#include <linux/numa.h>
#include <asm/asm.h>
......@@ -1045,7 +1046,6 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) =
DEFINE_PER_CPU(unsigned int, irq_count) = -1;
DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
/*
* Special IST stacks which the CPU switches to when it calls
......@@ -1115,7 +1115,6 @@ void debug_stack_reset(void)
DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
EXPORT_PER_CPU_SYMBOL(current_task);
DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
#ifdef CONFIG_CC_STACKPROTECTOR
DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
......
......@@ -16,6 +16,7 @@
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/user.h>
#ifdef CONFIG_X86_64
......@@ -32,6 +33,86 @@
# define user32_fxsr_struct user_fxsr_struct
#endif
/*
* Were we in an interrupt that interrupted kernel mode?
*
* We can do a kernel_fpu_begin/end() pair *ONLY* if that
* pair does nothing at all: the thread must not have fpu (so
* that we don't try to save the FPU state), and TS must
* be set (so that the clts/stts pair does nothing that is
* visible in the interrupted kernel thread).
*/
static inline bool interrupted_kernel_fpu_idle(void)
{
return !__thread_has_fpu(current) &&
(read_cr0() & X86_CR0_TS);
}
/*
* Were we in user mode (or vm86 mode) when we were
* interrupted?
*
* Doing kernel_fpu_begin/end() is ok if we are running
* in an interrupt context from user mode - we'll just
* save the FPU state as required.
*/
static inline bool interrupted_user_mode(void)
{
struct pt_regs *regs = get_irq_regs();
return regs && user_mode_vm(regs);
}
/*
* Can we use the FPU in kernel mode with the
* whole "kernel_fpu_begin/end()" sequence?
*
* It's always ok in process context (ie "not interrupt")
* but it is sometimes ok even from an irq.
*/
bool irq_fpu_usable(void)
{
return !in_interrupt() ||
interrupted_user_mode() ||
interrupted_kernel_fpu_idle();
}
EXPORT_SYMBOL(irq_fpu_usable);
void kernel_fpu_begin(void)
{
struct task_struct *me = current;
WARN_ON_ONCE(!irq_fpu_usable());
preempt_disable();
if (__thread_has_fpu(me)) {
__save_init_fpu(me);
__thread_clear_has_fpu(me);
/* We do 'stts()' in kernel_fpu_end() */
} else {
percpu_write(fpu_owner_task, NULL);
clts();
}
}
EXPORT_SYMBOL(kernel_fpu_begin);
void kernel_fpu_end(void)
{
stts();
preempt_enable();
}
EXPORT_SYMBOL(kernel_fpu_end);
void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
if (__thread_has_fpu(tsk)) {
__save_init_fpu(tsk);
__thread_fpu_end(tsk);
} else
tsk->fpu_counter = 0;
preempt_enable();
}
EXPORT_SYMBOL(unlazy_fpu);
#ifdef CONFIG_MATH_EMULATION
# define HAVE_HWFP (boot_cpu_data.hard_math)
#else
......@@ -44,7 +125,7 @@ EXPORT_SYMBOL_GPL(xstate_size);
unsigned int sig_xstate_ia32_size = sizeof(struct _fpstate_ia32);
static struct i387_fxsave_struct fx_scratch __cpuinitdata;
void __cpuinit mxcsr_feature_mask_init(void)
static void __cpuinit mxcsr_feature_mask_init(void)
{
unsigned long mask = 0;
......
......@@ -21,6 +21,7 @@
#include <asm/idle.h>
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/debugreg.h>
struct kmem_cache *task_xstate_cachep;
......
......@@ -45,6 +45,7 @@
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/desc.h>
#ifdef CONFIG_MATH_EMULATION
#include <asm/math_emu.h>
......
......@@ -43,6 +43,7 @@
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/mmu_context.h>
#include <asm/prctl.h>
#include <asm/desc.h>
......
......@@ -27,6 +27,7 @@
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/debugreg.h>
#include <asm/ldt.h>
#include <asm/desc.h>
......
......@@ -24,6 +24,7 @@
#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/vdso.h>
#include <asm/mce.h>
......
......@@ -54,6 +54,7 @@
#include <asm/traps.h>
#include <asm/desc.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/mce.h>
#include <asm/mach_traps.h>
......
......@@ -6,6 +6,7 @@
#include <linux/bootmem.h>
#include <linux/compat.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#ifdef CONFIG_IA32_EMULATION
#include <asm/sigcontext32.h>
#endif
......
......@@ -1457,7 +1457,7 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
#ifdef CONFIG_X86_64
wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
#endif
if (__thread_has_fpu(current))
if (user_has_fpu())
clts();
load_gdt(&__get_cpu_var(host_gdt));
}
......
......@@ -57,6 +57,7 @@
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h> /* Ugh! */
#include <asm/xcr.h>
#include <asm/pvclock.h>
#include <asm/div64.h>
......
......@@ -20,6 +20,7 @@
#include <asm/xcr.h>
#include <asm/suspend.h>
#include <asm/debugreg.h>
#include <asm/fpu-internal.h> /* pcntxt_mask */
#ifdef CONFIG_X86_32
static struct saved_context saved_context;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册