i2c/busses: Move two drivers to embedded section

And fix a typo while we are here
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

drivers/i2c/busses/Kconfig

@@ -475,6 +475,26 @@ config I2C_PASEMI
 	help
 	  Supports the PA Semi PWRficient on-chip SMBus interfaces.
 
+config I2C_PCA_PLATFORM
+	tristate "PCA9564/PCA9665 as platform device"
+	select I2C_ALGOPCA
+	default n
+	help
+	  This driver supports a memory mapped Philips PCA9564/PCA9665
+	  parallel bus to I2C bus controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pca-platform.
+
+config I2C_PMCMSP
+	tristate "PMC MSP I2C TWI Controller"
+	depends on PMC_MSP
+	help
+	  This driver supports the PMC TWI controller on MSP devices.
+
+	  This driver can also be built as module. If so, the module
+	  will be called i2c-pmcmsp.
+
 config I2C_PNX
 	tristate "I2C bus support for Philips PNX targets"
 	depends on ARCH_PNX4008
@@ -711,26 +731,6 @@ config I2C_PCA_ISA
 	  delays when I2C/SMBus chip drivers are loaded (e.g. at boot
 	  time).  If unsure, say N.
 
-config I2C_PCA_PLATFORM
-	tristate "PCA9564/PCA9665 as platform device"
-	select I2C_ALGOPCA
-	default n
-	help
-	  This driver supports a memory mapped Philips PCA9564/PCA9665
-	  parallel bus to I2C bus controller.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-pca-platform.
-
-config I2C_PMCMSP
-	tristate "PMC MSP I2C TWI Controller"
-	depends on PMC_MSP
-	help
-	  This driver supports the PMC TWI controller on MSP devices.
-
-	  This driver can also be built as module. If so, the module
-	  will be called i2c-pmcmsp.
-
 config I2C_SIBYTE
 	tristate "SiByte SMBus interface"
 	depends on SIBYTE_SB1xxx_SOC

drivers/i2c/busses/Makefile

@@ -27,7 +27,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
 obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
 obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 
-# Embebbed system I2C/SMBus host controller drivers
+# Embedded system I2C/SMBus host controller drivers
 obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
@@ -46,6 +46,8 @@ obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
+obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
+obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
@@ -68,8 +70,6 @@ obj-$(CONFIG_I2C_TINY_USB)	+= i2c-tiny-usb.o
 obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
-obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
-obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
 obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o