提交 350d71b9 编写于 作者: S Sebastian Hesselbarth

irqchip: add DesignWare APB ICTL interrupt controller

This adds an irqchip driver and corresponding devicetree binding for the
secondary interrupt controllers based on Synopsys DesignWare IP dw_apb_ictl.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NJisheng Zhang <jszhang@marvell.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
上级 6ce4eac1
Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
Synopsys DesignWare provides interrupt controller IP for APB known as
dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
APB bus, e.g. Marvell Armada 1500.
Required properties:
- compatible: shall be "snps,dw-apb-ictl"
- reg: physical base address of the controller and length of memory mapped
region starting with ENABLE_LOW register
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
- interrupts: interrupt reference to primary interrupt controller
- interrupt-parent: (optional) reference specific primary interrupt controller
The interrupt sources map to the corresponding bits in the interrupt
registers, i.e.
- 0 maps to bit 0 of low interrupts,
- 1 maps to bit 1 of low interrupts,
- 32 maps to bit 0 of high interrupts,
- 33 maps to bit 1 of high interrupts,
- (optional) fast interrupts start at 64.
Example:
aic: interrupt-controller@3000 {
compatible = "snps,dw-apb-ictl";
reg = <0x3000 0xc00>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
};
......@@ -30,6 +30,10 @@ config ARM_VIC_NR
The maximum number of VICs available in the system, for
power management.
config DW_APB_ICTL
bool
select IRQ_DOMAIN
config IMGPDC_IRQ
bool
select GENERIC_IRQ_CHIP
......
......@@ -6,6 +6,7 @@ obj-$(CONFIG_ARCH_MMP) += irq-mmp.o
obj-$(CONFIG_ARCH_MVEBU) += irq-armada-370-xp.o
obj-$(CONFIG_ARCH_MXS) += irq-mxs.o
obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o
......
/*
* Synopsys DW APB ICTL irqchip driver.
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*
* based on GPL'ed 2.6 kernel sources
* (c) Marvell International Ltd.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include "irqchip.h"
#define APB_INT_ENABLE_L 0x00
#define APB_INT_ENABLE_H 0x04
#define APB_INT_MASK_L 0x08
#define APB_INT_MASK_H 0x0c
#define APB_INT_FINALSTATUS_L 0x30
#define APB_INT_FINALSTATUS_H 0x34
static void dw_apb_ictl_handler(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
struct irq_chip_generic *gc = irq_get_handler_data(irq);
struct irq_domain *d = gc->private;
u32 stat;
int n;
chained_irq_enter(chip, desc);
for (n = 0; n < gc->num_ct; n++) {
stat = readl_relaxed(gc->reg_base +
APB_INT_FINALSTATUS_L + 4 * n);
while (stat) {
u32 hwirq = ffs(stat) - 1;
generic_handle_irq(irq_find_mapping(d,
gc->irq_base + hwirq + 32 * n));
stat &= ~(1 << hwirq);
}
}
chained_irq_exit(chip, desc);
}
static int __init dw_apb_ictl_init(struct device_node *np,
struct device_node *parent)
{
unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
struct resource r;
struct irq_domain *domain;
struct irq_chip_generic *gc;
void __iomem *iobase;
int ret, nrirqs, irq;
u32 reg;
/* Map the parent interrupt for the chained handler */
irq = irq_of_parse_and_map(np, 0);
if (irq <= 0) {
pr_err("%s: unable to parse irq\n", np->full_name);
return -EINVAL;
}
ret = of_address_to_resource(np, 0, &r);
if (ret) {
pr_err("%s: unable to get resource\n", np->full_name);
return ret;
}
if (!request_mem_region(r.start, resource_size(&r), np->full_name)) {
pr_err("%s: unable to request mem region\n", np->full_name);
return -ENOMEM;
}
iobase = ioremap(r.start, resource_size(&r));
if (!iobase) {
pr_err("%s: unable to map resource\n", np->full_name);
ret = -ENOMEM;
goto err_release;
}
/*
* DW IP can be configured to allow 2-64 irqs. We can determine
* the number of irqs supported by writing into enable register
* and look for bits not set, as corresponding flip-flops will
* have been removed by sythesis tool.
*/
/* mask and enable all interrupts */
writel(~0, iobase + APB_INT_MASK_L);
writel(~0, iobase + APB_INT_MASK_H);
writel(~0, iobase + APB_INT_ENABLE_L);
writel(~0, iobase + APB_INT_ENABLE_H);
reg = readl(iobase + APB_INT_ENABLE_H);
if (reg)
nrirqs = 32 + fls(reg);
else
nrirqs = fls(readl(iobase + APB_INT_ENABLE_L));
domain = irq_domain_add_linear(np, nrirqs,
&irq_generic_chip_ops, NULL);
if (!domain) {
pr_err("%s: unable to add irq domain\n", np->full_name);
ret = -ENOMEM;
goto err_unmap;
}
ret = irq_alloc_domain_generic_chips(domain, 32, (nrirqs > 32) ? 2 : 1,
np->name, handle_level_irq, clr, 0,
IRQ_GC_INIT_MASK_CACHE);
if (ret) {
pr_err("%s: unable to alloc irq domain gc\n", np->full_name);
goto err_unmap;
}
gc = irq_get_domain_generic_chip(domain, 0);
gc->private = domain;
gc->reg_base = iobase;
gc->chip_types[0].regs.mask = APB_INT_MASK_L;
gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit;
if (nrirqs > 32) {
gc->chip_types[1].regs.mask = APB_INT_MASK_H;
gc->chip_types[1].chip.irq_mask = irq_gc_mask_set_bit;
gc->chip_types[1].chip.irq_unmask = irq_gc_mask_clr_bit;
}
irq_set_handler_data(irq, gc);
irq_set_chained_handler(irq, dw_apb_ictl_handler);
return 0;
err_unmap:
iounmap(iobase);
err_release:
release_mem_region(r.start, resource_size(&r));
return ret;
}
IRQCHIP_DECLARE(dw_apb_ictl,
"snps,dw-apb-ictl", dw_apb_ictl_init);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册