Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"

stable inclusion
from stable-v5.10.146
commit 561d86bd0e288ad236e4f208ce2ae418a6e0e431
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=561d86bd0e288ad236e4f208ce2ae418a6e0e431

--------------------------------

[ Upstream commit fe0a2ac7 ]

This reverts commit 8cb339f1 as it
throws up a bunch of sparse warnings as reported by the kernel test
robot.
Reported-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202209020044.CX2PfZzM-lkp@intel.com
Fixes: 8cb339f1 ("usb: gadget: udc-xilinx: replace memcpy with memcpy_toio")
Cc: stable@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Piyush Mehta <piyush.mehta@amd.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJialin Zhang <zhangjialin11@huawei.com>
Reviewed-by: NZheng Zengkai <zhengzengkai@huawei.com>

drivers/usb/gadget/udc/udc-xilinx.c

@@ -496,11 +496,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req,
 		/* Get the Buffer address and copy the transmit data.*/
 		eprambase = (u32 __force *)(udc->addr + ep->rambase);
 		if (ep->is_in) {
-			memcpy_toio(eprambase, bufferptr, bytestosend);
+			memcpy(eprambase, bufferptr, bytestosend);
 			udc->write_fn(udc->addr, ep->offset +
 				      XUSB_EP_BUF0COUNT_OFFSET, bufferlen);
 		} else {
-			memcpy_toio(bufferptr, eprambase, bytestosend);
+			memcpy(bufferptr, eprambase, bytestosend);
 		}
 		/*
 		 * Enable the buffer for transmission.
@@ -514,11 +514,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req,
 		eprambase = (u32 __force *)(udc->addr + ep->rambase +
 			     ep->ep_usb.maxpacket);
 		if (ep->is_in) {
-			memcpy_toio(eprambase, bufferptr, bytestosend);
+			memcpy(eprambase, bufferptr, bytestosend);
 			udc->write_fn(udc->addr, ep->offset +
 				      XUSB_EP_BUF1COUNT_OFFSET, bufferlen);
 		} else {
-			memcpy_toio(bufferptr, eprambase, bytestosend);
+			memcpy(bufferptr, eprambase, bytestosend);
 		}
 		/*
 		 * Enable the buffer for transmission.
@@ -1020,7 +1020,7 @@ static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req)
 			   udc->addr);
 		length = req->usb_req.actual = min_t(u32, length,
 						     EP0_MAX_PACKET);
-		memcpy_toio(corebuf, req->usb_req.buf, length);
+		memcpy(corebuf, req->usb_req.buf, length);
 		udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length);
 		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
 	} else {
@@ -1746,7 +1746,7 @@ static void xudc_handle_setup(struct xusb_udc *udc)
 
 	/* Load up the chapter 9 command buffer.*/
 	ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET);
-	memcpy_toio(&setup, ep0rambase, 8);
+	memcpy(&setup, ep0rambase, 8);
 
 	udc->setup = setup;
 	udc->setup.wValue = cpu_to_le16(setup.wValue);
@@ -1833,7 +1833,7 @@ static void xudc_ep0_out(struct xusb_udc *udc)
 			     (ep0->rambase << 2));
 		buffer = req->usb_req.buf + req->usb_req.actual;
 		req->usb_req.actual = req->usb_req.actual + bytes_to_rx;
-		memcpy_toio(buffer, ep0rambase, bytes_to_rx);
+		memcpy(buffer, ep0rambase, bytes_to_rx);
 
 		if (req->usb_req.length == req->usb_req.actual) {
 			/* Data transfer completed get ready for Status stage */
@@ -1909,7 +1909,7 @@ static void xudc_ep0_in(struct xusb_udc *udc)
 				     (ep0->rambase << 2));
 			buffer = req->usb_req.buf + req->usb_req.actual;
 			req->usb_req.actual = req->usb_req.actual + length;
-			memcpy_toio(ep0rambase, buffer, length);
+			memcpy(ep0rambase, buffer, length);
 		}
 		udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count);
 		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);