提交 34f5ad8b 编写于 作者: J James Smart 提交者: James Bottomley

[SCSI] lpfc 8.3.33: Fix error when remote port switches address

Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
上级 908e18e4
......@@ -1476,6 +1476,10 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
return ndlp;
memset(&rrq.xri_bitmap, 0, sizeof(new_ndlp->active_rrqs.xri_bitmap));
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"3178 PLOGI confirm: ndlp %p x%x: new_ndlp %p\n",
ndlp, ndlp->nlp_DID, new_ndlp);
if (!new_ndlp) {
rc = memcmp(&ndlp->nlp_portname, name,
sizeof(struct lpfc_name));
......@@ -1527,6 +1531,9 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
/* The new_ndlp is replacing ndlp totally, so we need
* to put ndlp on UNUSED list and try to free it.
*/
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"3179 PLOGI confirm NEW: %x %x\n",
new_ndlp->nlp_DID, keepDID);
/* Fix up the rport accordingly */
rport = ndlp->rport;
......@@ -1559,23 +1566,34 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
lpfc_drop_node(vport, ndlp);
}
else {
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"3180 PLOGI confirm SWAP: %x %x\n",
new_ndlp->nlp_DID, keepDID);
lpfc_unreg_rpi(vport, ndlp);
/* Two ndlps cannot have the same did */
ndlp->nlp_DID = keepDID;
if (phba->sli_rev == LPFC_SLI_REV4)
memcpy(&ndlp->active_rrqs.xri_bitmap,
&rrq.xri_bitmap,
sizeof(ndlp->active_rrqs.xri_bitmap));
/* Since we are swapping the ndlp passed in with the new one
* and the did has already been swapped, copy over the
* state and names.
* and the did has already been swapped, copy over state.
* The new WWNs are already in new_ndlp since thats what
* we looked it up by in the begining of this routine.
*/
memcpy(&new_ndlp->nlp_portname, &ndlp->nlp_portname,
sizeof(struct lpfc_name));
memcpy(&new_ndlp->nlp_nodename, &ndlp->nlp_nodename,
sizeof(struct lpfc_name));
new_ndlp->nlp_state = ndlp->nlp_state;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
/* Since we are switching over to the new_ndlp, the old
* ndlp should be put in the NPR state, unless we have
* already started re-discovery on it.
*/
if ((ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) ||
(ndlp->nlp_state == NLP_STE_MAPPED_NODE))
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
/* Fix up the rport accordingly */
rport = ndlp->rport;
if (rport) {
......
......@@ -123,6 +123,10 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
"rport devlosscb: sid:x%x did:x%x flg:x%x",
ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag);
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
"3181 dev_loss_callbk x%06x, rport %p flg x%x\n",
ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag);
/* Don't defer this if we are in the process of deleting the vport
* or unloading the driver. The unload will cleanup the node
* appropriately we just need to cleanup the ndlp rport info here.
......@@ -142,6 +146,15 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
if (ndlp->nlp_state == NLP_STE_MAPPED_NODE)
return;
if (ndlp->nlp_type & NLP_FABRIC) {
/* If the WWPN of the rport and ndlp don't match, ignore it */
if (rport->port_name != wwn_to_u64(ndlp->nlp_portname.u.wwn)) {
put_device(&rport->dev);
return;
}
}
evtp = &ndlp->dev_loss_evt;
if (!list_empty(&evtp->evt_listp))
......@@ -202,6 +215,10 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
"rport devlosstmo:did:x%x type:x%x id:x%x",
ndlp->nlp_DID, ndlp->nlp_type, rport->scsi_target_id);
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
"3182 dev_loss_tmo_handler x%06x, rport %p flg x%x\n",
ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag);
/* Don't defer this if we are in the process of deleting the vport
* or unloading the driver. The unload will cleanup the node
* appropriately we just need to cleanup the ndlp rport info here.
......@@ -3834,6 +3851,10 @@ lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN)
fc_remote_port_rolechg(rport, rport_ids.roles);
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
"3183 rport register x%06x, rport %p role x%x\n",
ndlp->nlp_DID, rport, rport_ids.roles);
if ((rport->scsi_target_id != -1) &&
(rport->scsi_target_id < LPFC_MAX_TARGET)) {
ndlp->nlp_sid = rport->scsi_target_id;
......@@ -3850,6 +3871,10 @@ lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp)
"rport delete: did:x%x flg:x%x type x%x",
ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
"3184 rport unregister x%06x, rport %p\n",
ndlp->nlp_DID, rport);
fc_remote_port_delete(rport);
return;
......@@ -5365,9 +5390,17 @@ __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param)
struct lpfc_nodelist *ndlp;
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (filter(ndlp, param))
if (filter(ndlp, param)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
"3185 FIND node filter %p DID "
"Data: x%p x%x x%x\n",
filter, ndlp, ndlp->nlp_DID,
ndlp->nlp_flag);
return ndlp;
}
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
"3186 FIND node filter %p NOT FOUND.\n", filter);
return NULL;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册