Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 348324c5 编写于 作者: D Dmitry Torokhov
浏览文件
操作

Merge tag 'v3.13-rc4' into next 

Synchronize with mainline to bring in the new keycode definitions and
new hwmon API.
上级 1e63bd9c 319e2e3f
展开全部 隐藏空白更改
内联 并排
Showing with 41878 addition and 15334 deletion

要显示的变更太多。

To preserve performance only 1000 of 1000+ files are displayed.
文本差异 电子邮件补丁
CREDITS
浏览文件 @ 348324c5
......@@ -655,6 +655,11 @@ S: Stanford University
S: Stanford, California 94305
S: USA
N: Carlos Chinea
E: carlos.chinea@nokia.com
E: cch.devel@gmail.com
D: Author of HSI Subsystem
N: Randolph Chung
E: tausq@debian.org
D: Linux/PA-RISC hacker
......@@ -2576,7 +2581,7 @@ S: Toronto, Ontario
S: Canada
N: Zwane Mwaikambo
E: zwane@arm.linux.org.uk
E: zwanem@gmail.com
D: Various driver hacking
D: Lowlevel x86 kernel hacking
D: General debugging
......@@ -2895,6 +2900,11 @@ S: Framewood Road
S: Wexham SL3 6PJ
S: United Kingdom
N: Richard Purdie
E: rpurdie@rpsys.net
D: Backlight subsystem maintainer
S: United Kingdom
N: Daniel Quinlan
E: quinlan@pathname.com
W: http://www.pathname.com/~quinlan/
......@@ -3152,6 +3162,11 @@ N: Dipankar Sarma
E: dipankar@in.ibm.com
D: RCU
N: Yoshinori Sato
E: ysato@users.sourceforge.jp
D: uClinux for Renesas H8/300 (H8300)
D: http://uclinux-h8.sourceforge.jp/
N: Hannu Savolainen
E: hannu@opensound.com
D: Maintainer of the sound drivers until 2.1.x days.
......
Documentation/ABI/README
浏览文件 @ 348324c5
......@@ -72,3 +72,16 @@ kernel tree without going through the obsolete state first.
It's up to the developer to place their interfaces in the category they
wish for it to start out in.
Notable bits of non-ABI, which should not under any circumstances be considered
stable:
- Kconfig. Userspace should not rely on the presence or absence of any
particular Kconfig symbol, in /proc/config.gz, in the copy of .config
commonly installed to /boot, or in any invocation of the kernel build
process.
- Kernel-internal symbols. Do not rely on the presence, absence, location, or
type of any kernel symbol, either in System.map files or the kernel binary
itself. See Documentation/stable_api_nonsense.txt.
Documentation/ABI/stable/sysfs-bus-usb
浏览文件 @ 348324c5
......@@ -37,8 +37,8 @@ Description:
that the USB device has been connected to the machine. This
file is read-only.
Users:
PowerTOP <power@bughost.org>
http://www.lesswatts.org/projects/powertop/
PowerTOP <powertop@lists.01.org>
https://01.org/powertop/
What: /sys/bus/usb/device/.../power/active_duration
Date: January 2008
......@@ -57,8 +57,8 @@ Description:
will give an integer percentage. Note that this does not
account for counter wrap.
Users:
PowerTOP <power@bughost.org>
http://www.lesswatts.org/projects/powertop/
PowerTOP <powertop@lists.01.org>
https://01.org/powertop/
What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
Date: January 2008
......
Documentation/ABI/stable/sysfs-driver-ib_srp
浏览文件 @ 348324c5
......@@ -61,6 +61,12 @@ Description: Interface for making ib_srp connect to a new target.
interrupt is handled by a different CPU then the comp_vector
parameter can be used to spread the SRP completion workload
over multiple CPU's.
* tl_retry_count, a number in the range 2..7 specifying the
IB RC retry count.
* queue_size, the maximum number of commands that the
initiator is allowed to queue per SCSI host. The default
value for this parameter is 62. The lowest supported value
is 2.
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
Date: January 2, 2006
......@@ -153,6 +159,13 @@ Contact: linux-rdma@vger.kernel.org
Description: InfiniBand service ID used for establishing communication with
the SRP target.
What: /sys/class/scsi_host/host<n>/sgid
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-rdma@vger.kernel.org
Description: InfiniBand GID of the source port used for communication with
the SRP target.
What: /sys/class/scsi_host/host<n>/zero_req_lim
Date: September 20, 2006
KernelVersion: 2.6.18
......
Documentation/ABI/stable/sysfs-transport-srp
浏览文件 @ 348324c5
......@@ -5,6 +5,24 @@ Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: Instructs an SRP initiator to disconnect from a target and to
remove all LUNs imported from that target.
What: /sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: Number of seconds the SCSI layer will wait after a transport
layer error has been observed before removing a target port.
Zero means immediate removal. Setting this attribute to "off"
will disable the dev_loss timer.
What: /sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: Number of seconds the SCSI layer will wait after a transport
layer error has been observed before failing I/O. Zero means
failing I/O immediately. Setting this attribute to "off" will
disable the fast_io_fail timer.
What: /sys/class/srp_remote_ports/port-<h>:<n>/port_id
Date: June 27, 2007
KernelVersion: 2.6.24
......@@ -12,8 +30,29 @@ Contact: linux-scsi@vger.kernel.org
Description: 16-byte local SRP port identifier in hexadecimal format. An
example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
What: /sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: Number of seconds the SCSI layer will wait after a reconnect
attempt failed before retrying. Setting this attribute to
"off" will disable time-based reconnecting.
What: /sys/class/srp_remote_ports/port-<h>:<n>/roles
Date: June 27, 2007
KernelVersion: 2.6.24
Contact: linux-scsi@vger.kernel.org
Description: Role of the remote port. Either "SRP Initiator" or "SRP Target".
What: /sys/class/srp_remote_ports/port-<h>:<n>/state
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: State of the transport layer used for communication with the
remote port. "running" if the transport layer is operational;
"blocked" if a transport layer error has been encountered but
the fast_io_fail_tmo timer has not yet fired; "fail-fast"
after the fast_io_fail_tmo timer has fired and before the
"dev_loss_tmo" timer has fired; "lost" after the
"dev_loss_tmo" timer has fired and before the port is finally
removed.
Documentation/ABI/testing/configfs-usb-gadget-mass-storage 0 → 100644
浏览文件 @ 348324c5
What: /config/usb-gadget/gadget/functions/mass_storage.name
Date: Oct 2013
KenelVersion: 3.13
Description:
The attributes:
stall - Set to permit function to halt bulk endpoints.
Disabled on some USB devices known not to work
correctly. You should set it to true.
num_buffers - Number of pipeline buffers. Valid numbers
are 2..4. Available only if
CONFIG_USB_GADGET_DEBUG_FILES is set.
What: /config/usb-gadget/gadget/functions/mass_storage.name/lun.name
Date: Oct 2013
KenelVersion: 3.13
Description:
The attributes:
file - The path to the backing file for the LUN.
Required if LUN is not marked as removable.
ro - Flag specifying access to the LUN shall be
read-only. This is implied if CD-ROM emulation
is enabled as well as when it was impossible
to open "filename" in R/W mode.
removable - Flag specifying that LUN shall be indicated as
being removable.
cdrom - Flag specifying that LUN shall be reported as
being a CD-ROM.
nofua - Flag specifying that FUA flag
in SCSI WRITE(10,12)
Documentation/ABI/testing/sysfs-bus-iio
浏览文件 @ 348324c5
......@@ -79,7 +79,7 @@ Description:
correspond to externally available input one of the named
versions may be used. The number must always be specified and
unique to allow association with event codes. Units after
application of scale and offset are microvolts.
application of scale and offset are millivolts.
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
KernelVersion: 2.6.35
......@@ -90,7 +90,7 @@ Description:
physically equivalent inputs when non differential readings are
separately available. In differential only parts, then all that
is required is a consistent labeling. Units after application
of scale and offset are microvolts.
of scale and offset are millivolts.
What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
KernelVersion: 3.2
......@@ -537,6 +537,62 @@ Description:
value is in raw device units or in processed units (as _raw
and _input do on sysfs direct channel read attributes).
What: /sys/.../events/in_accel_x_thresh_rising_hysteresis
What: /sys/.../events/in_accel_x_thresh_falling_hysteresis
What: /sys/.../events/in_accel_x_thresh_either_hysteresis
What: /sys/.../events/in_accel_y_thresh_rising_hysteresis
What: /sys/.../events/in_accel_y_thresh_falling_hysteresis
What: /sys/.../events/in_accel_y_thresh_either_hysteresis
What: /sys/.../events/in_accel_z_thresh_rising_hysteresis
What: /sys/.../events/in_accel_z_thresh_falling_hysteresis
What: /sys/.../events/in_accel_z_thresh_either_hysteresis
What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis
What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis
What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis
What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis
What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis
What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis
What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis
What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis
What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis
What: /sys/.../events/in_magn_x_thresh_rising_hysteresis
What: /sys/.../events/in_magn_x_thresh_falling_hysteresis
What: /sys/.../events/in_magn_x_thresh_either_hysteresis
What: /sys/.../events/in_magn_y_thresh_rising_hysteresis
What: /sys/.../events/in_magn_y_thresh_falling_hysteresis
What: /sys/.../events/in_magn_y_thresh_either_hysteresis
What: /sys/.../events/in_magn_z_thresh_rising_hysteresis
What: /sys/.../events/in_magn_z_thresh_falling_hysteresis
What: /sys/.../events/in_magn_z_thresh_either_hysteresis
What: /sys/.../events/in_voltageY_thresh_rising_hysteresis
What: /sys/.../events/in_voltageY_thresh_falling_hysteresis
What: /sys/.../events/in_voltageY_thresh_either_hysteresis
What: /sys/.../events/in_tempY_thresh_rising_hysteresis
What: /sys/.../events/in_tempY_thresh_falling_hysteresis
What: /sys/.../events/in_tempY_thresh_either_hysteresis
What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis
what: /sys/.../events/in_illuminance0_thresh_rising_hysteresis
what: /sys/.../events/in_illuminance0_thresh_either_hysteresis
what: /sys/.../events/in_proximity0_thresh_falling_hysteresis
what: /sys/.../events/in_proximity0_thresh_rising_hysteresis
what: /sys/.../events/in_proximity0_thresh_either_hysteresis
KernelVersion: 3.13
Contact: linux-iio@vger.kernel.org
Description:
Specifies the hysteresis of threshold that the device is comparing
against for the events enabled by
<type>Y[_name]_thresh[_(rising|falling)]_hysteresis.
If separate attributes exist for the two directions, but
direction is not specified for this attribute, then a single
hysteresis value applies to both directions.
For falling events the hysteresis is added to the _value attribute for
this event to get the upper threshold for when the event goes back to
normal, for rising events the hysteresis is subtracted from the _value
attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200
and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event
will get activated once in_voltage0_raw goes above 1200 and will become
deactived again once the value falls below 1150.
What: /sys/.../events/in_accel_x_raw_roc_rising_value
What: /sys/.../events/in_accel_x_raw_roc_falling_value
What: /sys/.../events/in_accel_y_raw_roc_rising_value
......@@ -811,3 +867,14 @@ Description:
Writing '1' stores the current device configuration into
on-chip EEPROM. After power-up or chip reset the device will
automatically load the saved configuration.
What: /sys/.../iio:deviceX/in_intensity_red_integration_time
What: /sys/.../iio:deviceX/in_intensity_green_integration_time
What: /sys/.../iio:deviceX/in_intensity_blue_integration_time
What: /sys/.../iio:deviceX/in_intensity_clear_integration_time
What: /sys/.../iio:deviceX/in_illuminance_integration_time
KernelVersion: 3.12
Contact: linux-iio@vger.kernel.org
Description:
This attribute is used to get/set the integration time in
seconds.
Documentation/ABI/testing/sysfs-class-mic.txt 0 → 100644
浏览文件 @ 348324c5
What: /sys/class/mic/
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
The mic class directory belongs to Intel MIC devices and
provides information per MIC device. An Intel MIC device is a
PCIe form factor add-in Coprocessor card based on the Intel Many
Integrated Core (MIC) architecture that runs a Linux OS.
What: /sys/class/mic/mic(x)
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
The directories /sys/class/mic/mic0, /sys/class/mic/mic1 etc.,
represent MIC devices (0,1,..etc). Each directory has
information specific to that MIC device.
What: /sys/class/mic/mic(x)/family
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
Provides information about the Coprocessor family for an Intel
MIC device. For example - "x100"
What: /sys/class/mic/mic(x)/stepping
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
Provides information about the silicon stepping for an Intel
MIC device. For example - "A0" or "B0"
What: /sys/class/mic/mic(x)/state
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
When read, this entry provides the current state of an Intel
MIC device in the context of the card OS. Possible values that
will be read are:
"offline" - The MIC device is ready to boot the card OS. On
reading this entry after an OSPM resume, a "boot" has to be
written to this entry if the card was previously shutdown
during OSPM suspend.
"online" - The MIC device has initiated booting a card OS.
"shutting_down" - The card OS is shutting down.
"reset_failed" - The MIC device has failed to reset.
"suspending" - The MIC device is currently being prepared for
suspend. On reading this entry, a "suspend" has to be written
to the state sysfs entry to ensure the card is shutdown during
OSPM suspend.
"suspended" - The MIC device has been suspended.
When written, this sysfs entry triggers different state change
operations depending upon the current state of the card OS.
Acceptable values are:
"boot" - Boot the card OS image specified by the combination
of firmware, ramdisk, cmdline and bootmode
sysfs entries.
"reset" - Initiates device reset.
"shutdown" - Initiates card OS shutdown.
"suspend" - Initiates card OS shutdown and also marks the card
as suspended.
What: /sys/class/mic/mic(x)/shutdown_status
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
An Intel MIC device runs a Linux OS during its operation. This
OS can shutdown because of various reasons. When read, this
entry provides the status on why the card OS was shutdown.
Possible values are:
"nop" - shutdown status is not applicable, when the card OS is
"online"
"crashed" - Shutdown because of a HW or SW crash.
"halted" - Shutdown because of a halt command.
"poweroff" - Shutdown because of a poweroff command.
"restart" - Shutdown because of a restart command.
What: /sys/class/mic/mic(x)/cmdline
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
An Intel MIC device runs a Linux OS during its operation. Before
booting this card OS, it is possible to pass kernel command line
options to configure various features in it, similar to
self-bootable machines. When read, this entry provides
information about the current kernel command line options set to
boot the card OS. This entry can be written to change the
existing kernel command line options. Typically, the user would
want to read the current command line options, append new ones
or modify existing ones and then write the whole kernel command
line back to this entry.
What: /sys/class/mic/mic(x)/firmware
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
When read, this sysfs entry provides the path name under
/lib/firmware/ where the firmware image to be booted on the
card can be found. The entry can be written to change the
firmware image location under /lib/firmware/.
What: /sys/class/mic/mic(x)/ramdisk
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
When read, this sysfs entry provides the path name under
/lib/firmware/ where the ramdisk image to be used during card
OS boot can be found. The entry can be written to change
the ramdisk image location under /lib/firmware/.
What: /sys/class/mic/mic(x)/bootmode
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
When read, this sysfs entry provides the current bootmode for
the card. This sysfs entry can be written with the following
valid strings:
a) linux - Boot a Linux image.
b) elf - Boot an elf image for flash updates.
What: /sys/class/mic/mic(x)/log_buf_addr
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
An Intel MIC device runs a Linux OS during its operation. For
debugging purpose and early kernel boot messages, the user can
access the card OS log buffer via debugfs. When read, this entry
provides the kernel virtual address of the buffer where the card
OS log buffer can be read. This entry is written by the host
configuration daemon to set the log buffer address. The correct
log buffer address to be written can be found in the System.map
file of the card OS.
What: /sys/class/mic/mic(x)/log_buf_len
Date: October 2013
KernelVersion: 3.13
Contact: Sudeep Dutt <sudeep.dutt@intel.com>
Description:
An Intel MIC device runs a Linux OS during its operation. For
debugging purpose and early kernel boot messages, the user can
access the card OS log buffer via debugfs. When read, this entry
provides the kernel virtual address where the card OS log buffer
length can be read. This entry is written by host configuration
daemon to set the log buffer length address. The correct log
buffer length address to be written can be found in the
System.map file of the card OS.
Documentation/ABI/testing/sysfs-class-mtd
浏览文件 @ 348324c5
......@@ -104,7 +104,7 @@ Description:
One of the following ASCII strings, representing the device
type:
absent, ram, rom, nor, nand, dataflash, ubi, unknown
absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown
What: /sys/class/mtd/mtdX/writesize
Date: April 2009
......
Documentation/ABI/testing/sysfs-class-net-batman-adv
浏览文件 @ 348324c5
What: /sys/class/net/<iface>/batman-adv/iface_status
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Indicates the status of <iface> as it is seen by batman.
What: /sys/class/net/<iface>/batman-adv/mesh_iface
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
The /sys/class/net/<iface>/batman-adv/mesh_iface file
displays the batman mesh interface this <iface>
......
Documentation/ABI/testing/sysfs-class-net-mesh
浏览文件 @ 348324c5
What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Indicates whether the batman protocol messages of the
mesh <mesh_iface> shall be aggregated or not.
What: /sys/class/net/<mesh_iface>/mesh/ap_isolation
What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
Date: May 2011
Contact: Antonio Quartulli <ordex@autistici.org>
Contact: Antonio Quartulli <antonio@meshcoding.com>
Description:
Indicates whether the data traffic going from a
wireless client to another wireless client will be
silently dropped.
silently dropped. <vlan_subdir> is empty when referring
to the untagged lan.
What: /sys/class/net/<mesh_iface>/mesh/bonding
Date: June 2010
Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Contact: Simon Wunderlich <sw@simonwunderlich.de>
Description:
Indicates whether the data traffic going through the
mesh will be sent using multiple interfaces at the
......@@ -24,7 +25,7 @@ Description:
What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
Date: November 2011
Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Contact: Simon Wunderlich <sw@simonwunderlich.de>
Description:
Indicates whether the bridge loop avoidance feature
is enabled. This feature detects and avoids loops
......@@ -41,21 +42,21 @@ Description:
What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
Date: October 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the bandwidth which is propagated by this
node if gw_mode was set to 'server'.
What: /sys/class/net/<mesh_iface>/mesh/gw_mode
Date: October 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the state of the gateway features. Can be
either 'off', 'client' or 'server'.
What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class
Date: October 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the selection criteria this node will use
to choose a gateway if gw_mode was set to 'client'.
......@@ -77,25 +78,14 @@ Description:
What: /sys/class/net/<mesh_iface>/mesh/orig_interval
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the interval in milliseconds in which batman
sends its protocol messages.
What: /sys/class/net/<mesh_iface>/mesh/routing_algo
Date: Dec 2011
Contact: Marek Lindner <lindner_marek@yahoo.de>
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the routing procotol this mesh instance
uses to find the optimal paths through the mesh.
What: /sys/class/net/<mesh_iface>/mesh/vis_mode
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
Description:
Each batman node only maintains information about its
own local neighborhood, therefore generating graphs
showing the topology of the entire mesh is not easily
feasible without having a central instance to collect
the local topologies from all nodes. This file allows
to activate the collecting (server) mode.
Documentation/ABI/testing/sysfs-class-powercap 0 → 100644
浏览文件 @ 348324c5
What: /sys/class/powercap/
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
The powercap/ class sub directory belongs to the power cap
subsystem. Refer to
Documentation/power/powercap/powercap.txt for details.
What: /sys/class/powercap/<control type>
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
A <control type> is a unique name under /sys/class/powercap.
Here <control type> determines how the power is going to be
controlled. A <control type> can contain multiple power zones.
What: /sys/class/powercap/<control type>/enabled
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
This allows to enable/disable power capping for a "control type".
This status affects every power zone using this "control_type.
What: /sys/class/powercap/<control type>/<power zone>
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
A power zone is a single or a collection of devices, which can
be independently monitored and controlled. A power zone sysfs
entry is qualified with the name of the <control type>.
E.g. intel-rapl:0:1:1.
What: /sys/class/powercap/<control type>/<power zone>/<child power zone>
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Power zones may be organized in a hierarchy in which child
power zones provide monitoring and control for a subset of
devices under the parent. For example, if there is a parent
power zone for a whole CPU package, each CPU core in it can
be a child power zone.
What: /sys/class/powercap/.../<power zone>/name
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Specifies the name of this power zone.
What: /sys/class/powercap/.../<power zone>/energy_uj
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Current energy counter in micro-joules. Write "0" to reset.
If the counter can not be reset, then this attribute is
read-only.
What: /sys/class/powercap/.../<power zone>/max_energy_range_uj
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Range of the above energy counter in micro-joules.
What: /sys/class/powercap/.../<power zone>/power_uw
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Current power in micro-watts.
What: /sys/class/powercap/.../<power zone>/max_power_range_uw
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Range of the above power value in micro-watts.
What: /sys/class/powercap/.../<power zone>/constraint_X_name
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Each power zone can define one or more constraints. Each
constraint can have an optional name. Here "X" can have values
from 0 to max integer.
What: /sys/class/powercap/.../<power zone>/constraint_X_power_limit_uw
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Power limit in micro-watts should be applicable for
the time window specified by "constraint_X_time_window_us".
Here "X" can have values from 0 to max integer.
What: /sys/class/powercap/.../<power zone>/constraint_X_time_window_us
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Time window in micro seconds. This is used along with
constraint_X_power_limit_uw to define a power constraint.
Here "X" can have values from 0 to max integer.
What: /sys/class/powercap/<control type>/.../constraint_X_max_power_uw
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Maximum allowed power in micro watts for this constraint.
Here "X" can have values from 0 to max integer.
What: /sys/class/powercap/<control type>/.../constraint_X_min_power_uw
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Minimum allowed power in micro watts for this constraint.
Here "X" can have values from 0 to max integer.
What: /sys/class/powercap/.../<power zone>/constraint_X_max_time_window_us
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Maximum allowed time window in micro seconds for this
constraint. Here "X" can have values from 0 to max integer.
What: /sys/class/powercap/.../<power zone>/constraint_X_min_time_window_us
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description:
Minimum allowed time window in micro seconds for this
constraint. Here "X" can have values from 0 to max integer.
What: /sys/class/powercap/.../<power zone>/enabled
Date: September 2013
KernelVersion: 3.13
Contact: linux-pm@vger.kernel.org
Description
This allows to enable/disable power capping at power zone level.
This applies to current power zone and its children.
Documentation/ABI/testing/sysfs-devices-power
浏览文件 @ 348324c5
What: /sys/devices/.../power/
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power directory contains attributes
allowing the user space to check and modify some power
......@@ -8,7 +8,7 @@ Description:
What: /sys/devices/.../power/wakeup
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/wakeup attribute allows the user
space to check if the device is enabled to wake up the system
......@@ -34,7 +34,7 @@ Description:
What: /sys/devices/.../power/control
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/control attribute allows the user
space to control the run-time power management of the device.
......@@ -53,7 +53,7 @@ Description:
What: /sys/devices/.../power/async
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../async attribute allows the user space to
enable or diasble the device's suspend and resume callbacks to
......@@ -79,7 +79,7 @@ Description:
What: /sys/devices/.../power/wakeup_count
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_count attribute contains the number
of signaled wakeup events associated with the device. This
......@@ -88,7 +88,7 @@ Description:
What: /sys/devices/.../power/wakeup_active_count
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_active_count attribute contains the
number of times the processing of wakeup events associated with
......@@ -98,7 +98,7 @@ Description:
What: /sys/devices/.../power/wakeup_abort_count
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_abort_count attribute contains the
number of times the processing of a wakeup event associated with
......@@ -109,7 +109,7 @@ Description:
What: /sys/devices/.../power/wakeup_expire_count
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_expire_count attribute contains the
number of times a wakeup event associated with the device has
......@@ -119,7 +119,7 @@ Description:
What: /sys/devices/.../power/wakeup_active
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_active attribute contains either 1,
or 0, depending on whether or not a wakeup event associated with
......@@ -129,7 +129,7 @@ Description:
What: /sys/devices/.../power/wakeup_total_time_ms
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_total_time_ms attribute contains
the total time of processing wakeup events associated with the
......@@ -139,7 +139,7 @@ Description:
What: /sys/devices/.../power/wakeup_max_time_ms
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_max_time_ms attribute contains
the maximum time of processing a single wakeup event associated
......@@ -149,7 +149,7 @@ Description:
What: /sys/devices/.../power/wakeup_last_time_ms
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_last_time_ms attribute contains
the value of the monotonic clock corresponding to the time of
......@@ -160,7 +160,7 @@ Description:
What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
contains the total time the device has been preventing
......@@ -189,7 +189,7 @@ Description:
What: /sys/devices/.../power/pm_qos_latency_us
Date: March 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_resume_latency_us attribute
contains the PM QoS resume latency limit for the given device,
......@@ -207,7 +207,7 @@ Description:
What: /sys/devices/.../power/pm_qos_no_power_off
Date: September 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_no_power_off attribute
is used for manipulating the PM QoS "no power off" flag. If
......@@ -222,7 +222,7 @@ Description:
What: /sys/devices/.../power/pm_qos_remote_wakeup
Date: September 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_remote_wakeup attribute
is used for manipulating the PM QoS "remote wakeup required"
......
Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos 0 → 100644
浏览文件 @ 348324c5
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/control
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one select which data from which
profile will be read next. The data has to be 3 bytes long.
This file is writeonly.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/profile
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. profile holds index of actual profile.
This value is persistent, so its value determines the profile
that's active when the device is powered on next time.
When written, the device activates the set profile immediately.
The data has to be 3 bytes long.
The device will reject invalid data.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_primary
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set the default of all keys for
a specific profile. Profile index is included in written data.
The data has to be 125 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_function
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set the function of the
function keys for a specific profile. Profile index is included
in written data. The data has to be 95 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_macro
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set the function of the macro
keys for a specific profile. Profile index is included in
written data. The data has to be 35 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_thumbster
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set the function of the
thumbster keys for a specific profile. Profile index is included
in written data. The data has to be 23 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_extra
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set the function of the
capslock and function keys for a specific profile. Profile index
is included in written data. The data has to be 8 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_easyzone
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set the function of the
easyzone keys for a specific profile. Profile index is included
in written data. The data has to be 294 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/key_mask
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one deactivate certain keys like
windows and application keys, to prevent accidental presses.
Profile index for which this settings occur is included in
written data. The data has to be 6 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set the backlight intensity for
a specific profile. Profile index is included in written data.
This attribute is only valid for the glow and pro variant.
The data has to be 16 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/macro
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one store macros with max 480
keystrokes for a specific button for a specific profile.
Button and profile indexes are included in written data.
The data has to be 2002 bytes long.
Before reading this file, control has to be written to select
which profile and key to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/info
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When read, this file returns general data like firmware version.
The data is 8 bytes long.
This file is readonly.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/reset
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one reset the device.
The data has to be 3 bytes long.
This file is writeonly.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/talk
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one trigger easyshift functionality
from the host.
The data has to be 16 bytes long.
This file is writeonly.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_control
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one switch between stored and custom
light settings.
This attribute is only valid for the pro variant.
The data has to be 8 bytes long.
This file is writeonly.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/stored_lights
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set per-key lighting for different
layers.
This attribute is only valid for the pro variant.
The data has to be 1382 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/custom_lights
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set the actual per-key lighting.
This attribute is only valid for the pro variant.
The data has to be 20 bytes long.
This file is writeonly.
Users: http://roccat.sourceforge.net
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_macro
Date: October 2013
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When written, this file lets one set a light macro that is looped
whenever the device gets in dimness mode.
This attribute is only valid for the pro variant.
The data has to be 2002 bytes long.
Before reading this file, control has to be written to select
which profile to read.
Users: http://roccat.sourceforge.net
Documentation/ABI/testing/sysfs-driver-hid-wiimote
浏览文件 @ 348324c5
......@@ -57,3 +57,21 @@ Description: This attribute is only provided if the device was detected as a
Calibration data is already applied by the kernel to all input
values but may be used by user-space to perform other
transformations.
What: /sys/bus/hid/drivers/wiimote/<dev>/pro_calib
Date: October 2013
KernelVersion: 3.13
Contact: David Herrmann <dh.herrmann@gmail.com>
Description: This attribute is only provided if the device was detected as a
pro-controller. It provides a single line with 4 calibration
values for all 4 analog sticks. Format is: "x1:y1 x2:y2". Data
is prefixed with a +/-. Each value is a signed 16bit number.
Data is encoded as decimal numbers and specifies the offsets of
the analog sticks of the pro-controller.
Calibration data is already applied by the kernel to all input
values but may be used by user-space to perform other
transformations.
Calibration data is detected by the kernel during device setup.
You can write "scan\n" into this file to re-trigger calibration.
You can also write data directly in the form "x1:y1 x2:y2" to
set the calibration values manually.
Documentation/ABI/testing/sysfs-driver-sunxi-sid 0 → 100644
浏览文件 @ 348324c5
What: /sys/devices/*/<our-device>/eeprom
Date: August 2013
Contact: Oliver Schinagl <oliver@schinagl.nl>
Description: read-only access to the SID (Security-ID) on current
A-series SoC's from Allwinner. Currently supports A10, A10s, A13
and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes,
whereas the newer A20 SoC exposes 512 bytes split into sections.
Besides the 16 bytes of SID, there's also an SJTAG area,
HDMI-HDCP key and some custom keys. Below a quick overview, for
details see the user manual:
0x000 128 bit root-key (sun[457]i)
0x010 128 bit boot-key (sun7i)
0x020 64 bit security-jtag-key (sun7i)
0x028 16 bit key configuration (sun7i)
0x02b 16 bit custom-vendor-key (sun7i)
0x02c 320 bit low general key (sun7i)
0x040 32 bit read-control access (sun7i)
0x064 224 bit low general key (sun7i)
0x080 2304 bit HDCP-key (sun7i)
0x1a0 768 bit high general key (sun7i)
Users: any user space application which wants to read the SID on
Allwinner's A-series of CPU's.
Documentation/ABI/testing/sysfs-power
浏览文件 @ 348324c5
What: /sys/power/
Date: August 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power directory will contain files that will
provide a unified interface to the power management
......@@ -8,7 +8,7 @@ Description:
What: /sys/power/state
Date: August 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/state file controls the system power state.
Reading from this file returns what states are supported,
......@@ -22,7 +22,7 @@ Description:
What: /sys/power/disk
Date: September 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/disk file controls the operating mode of the
suspend-to-disk mechanism. Reading from this file returns
......@@ -67,7 +67,7 @@ Description:
What: /sys/power/image_size
Date: August 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/image_size file controls the size of the image
created by the suspend-to-disk mechanism. It can be written a
......@@ -84,7 +84,7 @@ Description:
What: /sys/power/pm_trace
Date: August 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/pm_trace file controls the code which saves the
last PM event point in the RTC across reboots, so that you can
......@@ -133,7 +133,7 @@ Description:
What: /sys/power/pm_async
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/pm_async file controls the switch allowing the
user space to enable or disable asynchronous suspend and resume
......@@ -146,7 +146,7 @@ Description:
What: /sys/power/wakeup_count
Date: July 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wakeup_count file allows user space to put the
system into a sleep state while taking into account the
......@@ -161,7 +161,7 @@ Description:
What: /sys/power/reserved_size
Date: May 2011
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/reserved_size file allows user space to control
the amount of memory reserved for allocations made by device
......@@ -175,7 +175,7 @@ Description:
What: /sys/power/autosleep
Date: April 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/autosleep file can be written one of the strings
returned by reads from /sys/power/state. If that happens, a
......@@ -192,7 +192,7 @@ Description:
What: /sys/power/wake_lock
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wake_lock file allows user space to create
wakeup source objects and activate them on demand (if one of
......@@ -219,7 +219,7 @@ Description:
What: /sys/power/wake_unlock
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wake_unlock file allows user space to deactivate
wakeup sources created with the help of /sys/power/wake_lock.
......
Documentation/Changes
浏览文件 @ 348324c5
......@@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode
as root before you can use this. You'll probably also want to
get the user-space microcode_ctl utility to use with this.
Powertweak
----------
If you are running v0.1.17 or earlier, you should upgrade to
version v0.99.0 or higher. Running old versions may cause problems
with programs using shared memory.
udev
----
udev is a userspace application for populating /dev dynamically with
......@@ -366,10 +359,6 @@ Intel P6 microcode
------------------
o <http://www.urbanmyth.org/microcode/>
Powertweak
----------
o <http://powertweak.sourceforge.net/>
udev
----
o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
......
Documentation/DMA-API-HOWTO.txt
浏览文件 @ 348324c5
......@@ -101,14 +101,23 @@ style to do this even if your device holds the default setting,
because this shows that you did think about these issues wrt. your
device.
The query is performed via a call to dma_set_mask():
The query is performed via a call to dma_set_mask_and_coherent():
int dma_set_mask(struct device *dev, u64 mask);
int dma_set_mask_and_coherent(struct device *dev, u64 mask);
The query for consistent allocations is performed via a call to
dma_set_coherent_mask():
which will query the mask for both streaming and coherent APIs together.
If you have some special requirements, then the following two separate
queries can be used instead:
int dma_set_coherent_mask(struct device *dev, u64 mask);
The query for streaming mappings is performed via a call to
dma_set_mask():
int dma_set_mask(struct device *dev, u64 mask);
The query for consistent allocations is performed via a call
to dma_set_coherent_mask():
int dma_set_coherent_mask(struct device *dev, u64 mask);
Here, dev is a pointer to the device struct of your device, and mask
is a bit mask describing which bits of an address your device
......@@ -137,7 +146,7 @@ exactly why.
The standard 32-bit addressing device would do something like this:
if (dma_set_mask(dev, DMA_BIT_MASK(32))) {
if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
printk(KERN_WARNING
"mydev: No suitable DMA available.\n");
goto ignore_this_device;
......@@ -171,22 +180,20 @@ the case would look like this:
int using_dac, consistent_using_dac;
if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
using_dac = 1;
consistent_using_dac = 1;
dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
} else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
} else if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
using_dac = 0;
consistent_using_dac = 0;
dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
} else {
printk(KERN_WARNING
"mydev: No suitable DMA available.\n");
goto ignore_this_device;
}
dma_set_coherent_mask() will always be able to set the same or a
smaller mask as dma_set_mask(). However for the rare case that a
The coherent coherent mask will always be able to set the same or a
smaller mask as the streaming mask. However for the rare case that a
device driver only uses consistent allocations, one would have to
check the return value from dma_set_coherent_mask().
......@@ -199,9 +206,9 @@ address you might do something like:
goto ignore_this_device;
}
When dma_set_mask() is successful, and returns zero, the kernel saves
away this mask you have provided. The kernel will use this
information later when you make DMA mappings.
When dma_set_mask() or dma_set_mask_and_coherent() is successful, and
returns zero, the kernel saves away this mask you have provided. The
kernel will use this information later when you make DMA mappings.
There is a case which we are aware of at this time, which is worth
mentioning in this documentation. If your device supports multiple
......
Documentation/DMA-API.txt
浏览文件 @ 348324c5
......@@ -141,6 +141,14 @@ won't change the current mask settings. It is more intended as an
internal API for use by the platform than an external API for use by
driver writers.
int
dma_set_mask_and_coherent(struct device *dev, u64 mask)
Checks to see if the mask is possible and updates the device
streaming and coherent DMA mask parameters if it is.
Returns: 0 if successful and a negative error if not.
int
dma_set_mask(struct device *dev, u64 mask)
......
Documentation/DMA-attributes.txt
浏览文件 @ 348324c5
......@@ -13,7 +13,7 @@ all pending DMA writes to complete, and thus provides a mechanism to
strictly order DMA from a device across all intervening busses and
bridges. This barrier is not specific to a particular type of
interconnect, it applies to the system as a whole, and so its
implementation must account for the idiosyncracies of the system all
implementation must account for the idiosyncrasies of the system all
the way from the DMA device to memory.
As an example of a situation where DMA_ATTR_WRITE_BARRIER would be
......@@ -60,7 +60,7 @@ such mapping is non-trivial task and consumes very limited resources
Buffers allocated with this attribute can be only passed to user space
by calling dma_mmap_attrs(). By using this API, you are guaranteeing
that you won't dereference the pointer returned by dma_alloc_attr(). You
can threat it as a cookie that must be passed to dma_mmap_attrs() and
can treat it as a cookie that must be passed to dma_mmap_attrs() and
dma_free_attrs(). Make sure that both of these also get this attribute
set on each call.
......@@ -82,7 +82,7 @@ to 'device' domain, what synchronizes CPU caches for the given region
(usually it means that the cache has been flushed or invalidated
depending on the dma direction). However, next calls to
dma_map_{single,page,sg}() for other devices will perform exactly the
same sychronization operation on the CPU cache. CPU cache sychronization
same synchronization operation on the CPU cache. CPU cache synchronization
might be a time consuming operation, especially if the buffers are
large, so it is highly recommended to avoid it if possible.
DMA_ATTR_SKIP_CPU_SYNC allows platform code to skip synchronization of
......
Documentation/DocBook/80211.tmpl
浏览文件 @ 348324c5
......@@ -152,8 +152,8 @@
!Finclude/net/cfg80211.h cfg80211_scan_request
!Finclude/net/cfg80211.h cfg80211_scan_done
!Finclude/net/cfg80211.h cfg80211_bss
!Finclude/net/cfg80211.h cfg80211_inform_bss_frame
!Finclude/net/cfg80211.h cfg80211_inform_bss
!Finclude/net/cfg80211.h cfg80211_inform_bss_width_frame
!Finclude/net/cfg80211.h cfg80211_inform_bss_width
!Finclude/net/cfg80211.h cfg80211_unlink_bss
!Finclude/net/cfg80211.h cfg80211_find_ie
!Finclude/net/cfg80211.h ieee80211_bss_get_ie
......
Documentation/DocBook/device-drivers.tmpl
浏览文件 @ 348324c5
......@@ -58,7 +58,7 @@
</sect1>
<sect1><title>Wait queues and Wake events</title>
!Iinclude/linux/wait.h
!Ekernel/wait.c
!Ekernel/sched/wait.c
</sect1>
<sect1><title>High-resolution timers</title>
!Iinclude/linux/ktime.h
......@@ -87,7 +87,10 @@ X!Iinclude/linux/kobject.h
!Ekernel/printk/printk.c
!Ekernel/panic.c
!Ekernel/sys.c
!Ekernel/rcupdate.c
!Ekernel/rcu/srcu.c
!Ekernel/rcu/tree.c
!Ekernel/rcu/tree_plugin.h
!Ekernel/rcu/update.c
</sect1>
<sect1><title>Device Resource Management</title>
......
Documentation/DocBook/filesystems.tmpl
浏览文件 @ 348324c5
......@@ -91,7 +91,6 @@
<title>The Filesystem for Exporting Kernel Objects</title>
!Efs/sysfs/file.c
!Efs/sysfs/symlink.c
!Efs/sysfs/bin.c
</chapter>
<chapter id="debugfs">
......
Documentation/DocBook/genericirq.tmpl
浏览文件 @ 348324c5
......@@ -87,7 +87,7 @@
<chapter id="rationale">
<title>Rationale</title>
<para>
The original implementation of interrupt handling in Linux is using
The original implementation of interrupt handling in Linux uses
the __do_IRQ() super-handler, which is able to deal with every
type of interrupt logic.
</para>
......@@ -111,19 +111,19 @@
</itemizedlist>
</para>
<para>
This split implementation of highlevel IRQ handlers allows us to
This split implementation of high-level IRQ handlers allows us to
optimize the flow of the interrupt handling for each specific
interrupt type. This reduces complexity in that particular codepath
interrupt type. This reduces complexity in that particular code path
and allows the optimized handling of a given type.
</para>
<para>
The original general IRQ implementation used hw_interrupt_type
structures and their ->ack(), ->end() [etc.] callbacks to
differentiate the flow control in the super-handler. This leads to
a mix of flow logic and lowlevel hardware logic, and it also leads
to unnecessary code duplication: for example in i386, there is a
ioapic_level_irq and a ioapic_edge_irq irq-type which share many
of the lowlevel details but have different flow handling.
a mix of flow logic and low-level hardware logic, and it also leads
to unnecessary code duplication: for example in i386, there is an
ioapic_level_irq and an ioapic_edge_irq IRQ-type which share many
of the low-level details but have different flow handling.
</para>
<para>
A more natural abstraction is the clean separation of the
......@@ -132,23 +132,23 @@
<para>
Analysing a couple of architecture's IRQ subsystem implementations
reveals that most of them can use a generic set of 'irq flow'
methods and only need to add the chip level specific code.
methods and only need to add the chip-level specific code.
The separation is also valuable for (sub)architectures
which need specific quirks in the irq flow itself but not in the
chip-details - and thus provides a more transparent IRQ subsystem
which need specific quirks in the IRQ flow itself but not in the
chip details - and thus provides a more transparent IRQ subsystem
design.
</para>
<para>
Each interrupt descriptor is assigned its own highlevel flow
Each interrupt descriptor is assigned its own high-level flow
handler, which is normally one of the generic
implementations. (This highlevel flow handler implementation also
implementations. (This high-level flow handler implementation also
makes it simple to provide demultiplexing handlers which can be
found in embedded platforms on various architectures.)
</para>
<para>
The separation makes the generic interrupt handling layer more
flexible and extensible. For example, an (sub)architecture can
use a generic irq-flow implementation for 'level type' interrupts
use a generic IRQ-flow implementation for 'level type' interrupts
and add a (sub)architecture specific 'edge type' implementation.
</para>
<para>
......@@ -172,9 +172,9 @@
<para>
There are three main levels of abstraction in the interrupt code:
<orderedlist>
<listitem><para>Highlevel driver API</para></listitem>
<listitem><para>Highlevel IRQ flow handlers</para></listitem>
<listitem><para>Chiplevel hardware encapsulation</para></listitem>
<listitem><para>High-level driver API</para></listitem>
<listitem><para>High-level IRQ flow handlers</para></listitem>
<listitem><para>Chip-level hardware encapsulation</para></listitem>
</orderedlist>
</para>
<sect1 id="Interrupt_control_flow">
......@@ -189,16 +189,16 @@
which are assigned to this interrupt.
</para>
<para>
Whenever an interrupt triggers, the lowlevel arch code calls into
the generic interrupt code by calling desc->handle_irq().
This highlevel IRQ handling function only uses desc->irq_data.chip
Whenever an interrupt triggers, the low-level architecture code calls
into the generic interrupt code by calling desc->handle_irq().
This high-level IRQ handling function only uses desc->irq_data.chip
primitives referenced by the assigned chip descriptor structure.
</para>
</sect1>
<sect1 id="Highlevel_Driver_API">
<title>Highlevel Driver API</title>
<title>High-level Driver API</title>
<para>
The highlevel Driver API consists of following functions:
The high-level Driver API consists of following functions:
<itemizedlist>
<listitem><para>request_irq()</para></listitem>
<listitem><para>free_irq()</para></listitem>
......@@ -216,7 +216,7 @@
</para>
</sect1>
<sect1 id="Highlevel_IRQ_flow_handlers">
<title>Highlevel IRQ flow handlers</title>
<title>High-level IRQ flow handlers</title>
<para>
The generic layer provides a set of pre-defined irq-flow methods:
<itemizedlist>
......@@ -228,7 +228,7 @@
<listitem><para>handle_edge_eoi_irq</para></listitem>
<listitem><para>handle_bad_irq</para></listitem>
</itemizedlist>
The interrupt flow handlers (either predefined or architecture
The interrupt flow handlers (either pre-defined or architecture
specific) are assigned to specific interrupts by the architecture
either during bootup or during device initialization.
</para>
......@@ -297,7 +297,7 @@ desc->irq_data.chip->irq_unmask();
<para>
handle_fasteoi_irq provides a generic implementation
for interrupts, which only need an EOI at the end of
the handler
the handler.
</para>
<para>
The following control flow is implemented (simplified excerpt):
......@@ -394,7 +394,7 @@ if (desc->irq_data.chip->irq_eoi)
The generic functions are intended for 'clean' architectures and chips,
which have no platform-specific IRQ handling quirks. If an architecture
needs to implement quirks on the 'flow' level then it can do so by
overriding the highlevel irq-flow handler.
overriding the high-level irq-flow handler.
</para>
</sect2>
<sect2 id="Delayed_interrupt_disable">
......@@ -419,9 +419,9 @@ if (desc->irq_data.chip->irq_eoi)
</sect2>
</sect1>
<sect1 id="Chiplevel_hardware_encapsulation">
<title>Chiplevel hardware encapsulation</title>
<title>Chip-level hardware encapsulation</title>
<para>
The chip level hardware descriptor structure irq_chip
The chip-level hardware descriptor structure irq_chip
contains all the direct chip relevant functions, which
can be utilized by the irq flow implementations.
<itemizedlist>
......@@ -429,14 +429,14 @@ if (desc->irq_data.chip->irq_eoi)
<listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
<listitem><para>irq_mask()</para></listitem>
<listitem><para>irq_unmask()</para></listitem>
<listitem><para>irq_eoi() - Optional, required for eoi flow handlers</para></listitem>
<listitem><para>irq_eoi() - Optional, required for EOI flow handlers</para></listitem>
<listitem><para>irq_retrigger() - Optional</para></listitem>
<listitem><para>irq_set_type() - Optional</para></listitem>
<listitem><para>irq_set_wake() - Optional</para></listitem>
</itemizedlist>
These primitives are strictly intended to mean what they say: ack means
ACK, masking means masking of an IRQ line, etc. It is up to the flow
handler(s) to use these basic units of lowlevel functionality.
handler(s) to use these basic units of low-level functionality.
</para>
</sect1>
</chapter>
......@@ -445,7 +445,7 @@ if (desc->irq_data.chip->irq_eoi)
<title>__do_IRQ entry point</title>
<para>
The original implementation __do_IRQ() was an alternative entry
point for all types of interrupts. It not longer exists.
point for all types of interrupts. It no longer exists.
</para>
<para>
This handler turned out to be not suitable for all
......@@ -468,11 +468,11 @@ if (desc->irq_data.chip->irq_eoi)
<chapter id="genericchip">
<title>Generic interrupt chip</title>
<para>
To avoid copies of identical implementations of irq chips the
To avoid copies of identical implementations of IRQ chips the
core provides a configurable generic interrupt chip
implementation. Developers should check carefuly whether the
generic chip fits their needs before implementing the same
functionality slightly different themself.
functionality slightly differently themselves.
</para>
!Ekernel/irq/generic-chip.c
</chapter>
......
Documentation/DocBook/kernel-locking.tmpl
浏览文件 @ 348324c5
......@@ -1958,7 +1958,7 @@ machines due to caching.
<chapter id="apiref-mutex">
<title>Mutex API reference</title>
!Iinclude/linux/mutex.h
!Ekernel/mutex.c
!Ekernel/locking/mutex.c
</chapter>
<chapter id="apiref-futex">
......
Documentation/DocBook/media/v4l/vidioc-expbuf.xml
浏览文件 @ 348324c5
......@@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
format. For the single-planar API, applications must set <structfield> plane
</structfield> to zero. Additional flags may be posted in the <structfield>
flags </structfield> field. Refer to a manual for open() for details.
Currently only O_CLOEXEC is supported. All other fields must be set to zero.
Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All
other fields must be set to zero.
In the case of multi-planar API, every plane is exported separately using
multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
......@@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
<entry>__u32</entry>
<entry><structfield>flags</structfield></entry>
<entry>Flags for the newly created file, currently only <constant>
O_CLOEXEC </constant> is supported, refer to the manual of open() for more
details.</entry>
O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
of open() for more details.</entry>
</row>
<row>
<entry>__s32</entry>
......
Documentation/DocBook/mtdnand.tmpl
浏览文件 @ 348324c5
......@@ -1222,8 +1222,6 @@ in this page</entry>
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none axists */
#define NAND_BBT_CREATE 0x00000200
/* Search good / bad pattern through all pages of a block */
#define NAND_BBT_SCANALLPAGES 0x00000400
/* Write bbt if neccecary */
#define NAND_BBT_WRITE 0x00001000
/* Read and write back block contents when writing bbt */
......
Documentation/PCI/pci.txt
浏览文件 @ 348324c5
......@@ -525,8 +525,9 @@ corresponding register block for you.
6. Other interesting functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pci_find_slot() Find pci_dev corresponding to given bus and
slot numbers.
pci_get_domain_bus_and_slot() Find pci_dev corresponding to given domain,
bus and slot and number. If the device is
found, its reference count is increased.
pci_set_power_state() Set PCI Power Management state (0=D0 ... 3=D3)
pci_find_capability() Find specified capability in device's capability
list.
......@@ -582,7 +583,8 @@ having sane locking.
pci_find_device() Superseded by pci_get_device()
pci_find_subsys() Superseded by pci_get_subsys()
pci_find_slot() Superseded by pci_get_slot()
pci_find_slot() Superseded by pci_get_domain_bus_and_slot()
pci_get_slot() Superseded by pci_get_domain_bus_and_slot()
The alternative is the traditional PCI device driver that walks PCI
......
Documentation/RCU/checklist.txt
浏览文件 @ 348324c5
......@@ -202,8 +202,8 @@ over a rather long period of time, but improvements are always welcome!
updater uses call_rcu_sched() or synchronize_sched(), then
the corresponding readers must disable preemption, possibly
by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
If the updater uses synchronize_srcu() or call_srcu(),
the the corresponding readers must use srcu_read_lock() and
If the updater uses synchronize_srcu() or call_srcu(), then
the corresponding readers must use srcu_read_lock() and
srcu_read_unlock(), and with the same srcu_struct. The rules for
the expedited primitives are the same as for their non-expedited
counterparts. Mixing things up will result in confusion and
......
Documentation/RCU/stallwarn.txt
浏览文件 @ 348324c5
......@@ -12,12 +12,12 @@ CONFIG_RCU_CPU_STALL_TIMEOUT
This kernel configuration parameter defines the period of time
that RCU will wait from the beginning of a grace period until it
issues an RCU CPU stall warning. This time period is normally
sixty seconds.
21 seconds.
This configuration parameter may be changed at runtime via the
/sys/module/rcutree/parameters/rcu_cpu_stall_timeout, however
this parameter is checked only at the beginning of a cycle.
So if you are 30 seconds into a 70-second stall, setting this
So if you are 10 seconds into a 40-second stall, setting this
sysfs parameter to (say) five will shorten the timeout for the
-next- stall, or the following warning for the current stall
(assuming the stall lasts long enough). It will not affect the
......@@ -32,7 +32,7 @@ CONFIG_RCU_CPU_STALL_VERBOSE
also dump the stacks of any tasks that are blocking the current
RCU-preempt grace period.
RCU_CPU_STALL_INFO
CONFIG_RCU_CPU_STALL_INFO
This kernel configuration parameter causes the stall warning to
print out additional per-CPU diagnostic information, including
......@@ -43,7 +43,8 @@ RCU_STALL_DELAY_DELTA
Although the lockdep facility is extremely useful, it does add
some overhead. Therefore, under CONFIG_PROVE_RCU, the
RCU_STALL_DELAY_DELTA macro allows five extra seconds before
giving an RCU CPU stall warning message.
giving an RCU CPU stall warning message. (This is a cpp
macro, not a kernel configuration parameter.)
RCU_STALL_RAT_DELAY
......@@ -52,7 +53,8 @@ RCU_STALL_RAT_DELAY
However, if the offending CPU does not detect its own stall in
the number of jiffies specified by RCU_STALL_RAT_DELAY, then
some other CPU will complain. This delay is normally set to
two jiffies.
two jiffies. (This is a cpp macro, not a kernel configuration
parameter.)
When a CPU detects that it is stalling, it will print a message similar
to the following:
......@@ -86,7 +88,12 @@ printing, there will be a spurious stall-warning message:
INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies)
This is rare, but does happen from time to time in real life.
This is rare, but does happen from time to time in real life. It is also
possible for a zero-jiffy stall to be flagged in this case, depending
on how the stall warning and the grace-period initialization happen to
interact. Please note that it is not possible to entirely eliminate this
sort of false positive without resorting to things like stop_machine(),
which is overkill for this sort of problem.
If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
more information is printed with the stall-warning message, for example:
......@@ -216,4 +223,5 @@ that portion of the stack which remains the same from trace to trace.
If you can reliably trigger the stall, ftrace can be quite helpful.
RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE
and with RCU's event tracing.
and with RCU's event tracing. For information on RCU's event tracing,
see include/trace/events/rcu.h.
Documentation/acpi/dsdt-override.txt
浏览文件 @ 348324c5
......@@ -4,4 +4,4 @@ CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel.
When to use this method is described in detail on the
Linux/ACPI home page:
http://www.lesswatts.org/projects/acpi/overridingDSDT.php
https://01.org/linux-acpi/documentation/overriding-dsdt
Documentation/acpi/enumeration.txt
浏览文件 @ 348324c5
......@@ -295,10 +295,6 @@ These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
specifies the path to the controller. In order to use these GPIOs in Linux
we need to translate them to the Linux GPIO numbers.
The driver can do this by including <linux/acpi_gpio.h> and then calling
acpi_get_gpio(path, gpio). This will return the Linux GPIO number or
negative errno if there was no translation found.
In a simple case of just getting the Linux GPIO number from device
resources one can use acpi_get_gpio_by_index() helper function. It takes
pointer to the device and index of the GpioIo/GpioInt descriptor in the
......@@ -322,3 +318,25 @@ suitable to the gpiolib before passing them.
In case of GpioInt resource an additional call to gpio_to_irq() must be
done before calling request_irq().
Note that the above API is ACPI specific and not recommended for drivers
that need to support non-ACPI systems. The recommended way is to use
the descriptor based GPIO interfaces. The above example looks like this
when converted to the GPIO desc:
#include <linux/gpio/consumer.h>
...
struct gpio_desc *irq_desc, *power_desc;
irq_desc = gpiod_get_index(dev, NULL, 1);
if (IS_ERR(irq_desc))
/* handle error */
power_desc = gpiod_get_index(dev, NULL, 0);
if (IS_ERR(power_desc))
/* handle error */
/* Now we can use the GPIO descriptors */
See also Documentation/gpio.txt.
Documentation/arm/Marvell/README
浏览文件 @ 348324c5
......@@ -88,6 +88,7 @@ EBU Armada family
MV78230
MV78260
MV78460
NOTE: not to be confused with the non-SMP 78xx0 SoCs
Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
No public datasheet available.
......
Documentation/arm/sunxi/README
浏览文件 @ 348324c5
......@@ -10,6 +10,10 @@ SunXi family
Linux kernel mach directory: arch/arm/mach-sunxi
Flavors:
* ARM926 based SoCs
- Allwinner F20 (sun3i)
+ Not Supported
* ARM Cortex-A8 based SoCs
- Allwinner A10 (sun4i)
+ Datasheet
......@@ -25,4 +29,24 @@ SunXi family
+ Datasheet
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
+ User Manual
http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-08-08%29.pdf
http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
* Dual ARM Cortex-A7 based SoCs
- Allwinner A20 (sun7i)
+ User Manual
http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
- Allwinner A23
+ Not Supported
* Quad ARM Cortex-A7 based SoCs
- Allwinner A31 (sun6i)
+ Datasheet
http://dl.linux-sunxi.org/A31/A31%20Datasheet%20-%20v1.00%20(2012-12-24).pdf
- Allwinner A31s (sun6i)
+ Not Supported
* Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
- Allwinner A80
+ Not Supported
\ No newline at end of file
Documentation/arm64/booting.txt
浏览文件 @ 348324c5
......@@ -115,9 +115,10 @@ Before jumping into the kernel, the following conditions must be met:
External caches (if present) must be configured and disabled.
- Architected timers
CNTFRQ must be programmed with the timer frequency.
If entering the kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0)
set where available.
CNTFRQ must be programmed with the timer frequency and CNTVOFF must
be programmed with a consistent value on all CPUs. If entering the
kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) set where
available.
- Coherency
All CPUs to be booted by the kernel must be part of the same coherency
......@@ -130,30 +131,46 @@ Before jumping into the kernel, the following conditions must be met:
the kernel image will be entered must be initialised by software at a
higher exception level to prevent execution in an UNKNOWN state.
The requirements described above for CPU mode, caches, MMUs, architected
timers, coherency and system registers apply to all CPUs. All CPUs must
enter the kernel in the same exception level.
The boot loader is expected to enter the kernel on each CPU in the
following manner:
- The primary CPU must jump directly to the first instruction of the
kernel image. The device tree blob passed by this CPU must contain
for each CPU node:
1. An 'enable-method' property. Currently, the only supported value
for this field is the string "spin-table".
2. A 'cpu-release-addr' property identifying a 64-bit,
zero-initialised memory location.
an 'enable-method' property for each cpu node. The supported
enable-methods are described below.
It is expected that the bootloader will generate these device tree
properties and insert them into the blob prior to kernel entry.
- Any secondary CPUs must spin outside of the kernel in a reserved area
of memory (communicated to the kernel by a /memreserve/ region in the
- CPUs with a "spin-table" enable-method must have a 'cpu-release-addr'
property in their cpu node. This property identifies a
naturally-aligned 64-bit zero-initalised memory location.
These CPUs should spin outside of the kernel in a reserved area of
memory (communicated to the kernel by a /memreserve/ region in the
device tree) polling their cpu-release-addr location, which must be
contained in the reserved region. A wfe instruction may be inserted
to reduce the overhead of the busy-loop and a sev will be issued by
the primary CPU. When a read of the location pointed to by the
cpu-release-addr returns a non-zero value, the CPU must jump directly
to this value.
cpu-release-addr returns a non-zero value, the CPU must jump to this
value. The value will be written as a single 64-bit little-endian
value, so CPUs must convert the read value to their native endianness
before jumping to it.
- CPUs with a "psci" enable method should remain outside of
the kernel (i.e. outside of the regions of memory described to the
kernel in the memory node, or in a reserved area of memory described
to the kernel by a /memreserve/ region in the device tree). The
kernel will issue CPU_ON calls as described in ARM document number ARM
DEN 0022A ("Power State Coordination Interface System Software on ARM
processors") to bring CPUs into the kernel.
The device tree should contain a 'psci' node, as described in
Documentation/devicetree/bindings/arm/psci.txt.
- Secondary CPU general-purpose register settings
x0 = 0 (reserved for future use)
......
Documentation/arm64/memory.txt
浏览文件 @ 348324c5
......@@ -21,7 +21,7 @@ The swapper_pgd_dir address is written to TTBR1 and never written to
TTBR0.
AArch64 Linux memory layout:
AArch64 Linux memory layout with 4KB pages:
Start End Size Use
-----------------------------------------------------------------------
......@@ -39,13 +39,38 @@ ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk device
ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O space
ffffffbbffff0000 ffffffbcffffffff ~2MB [guard]
ffffffbffbe10000 ffffffbcffffffff ~2MB [guard]
ffffffbffc000000 ffffffbfffffffff 64MB modules
ffffffc000000000 ffffffffffffffff 256GB kernel logical memory map
AArch64 Linux memory layout with 64KB pages:
Start End Size Use
-----------------------------------------------------------------------
0000000000000000 000003ffffffffff 4TB user
fffffc0000000000 fffffdfbfffeffff ~2TB vmalloc
fffffdfbffff0000 fffffdfbffffffff 64KB [guard page]
fffffdfc00000000 fffffdfdffffffff 8GB vmemmap
fffffdfe00000000 fffffdfffbbfffff ~8GB [guard, future vmmemap]
fffffdfffbc00000 fffffdfffbdfffff 2MB earlyprintk device
fffffdfffbe00000 fffffdfffbe0ffff 64KB PCI I/O space
fffffdfffbe10000 fffffdfffbffffff ~2MB [guard]
fffffdfffc000000 fffffdffffffffff 64MB modules
fffffe0000000000 ffffffffffffffff 2TB kernel logical memory map
Translation table lookup with 4KB pages:
+--------+--------+--------+--------+--------+--------+--------+--------+
......
Documentation/assoc_array.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/backlight/lp855x-driver.txt
浏览文件 @ 348324c5
......@@ -4,7 +4,8 @@ Kernel driver lp855x
Backlight driver for LP855x ICs
Supported chips:
Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
LP8557
Author: Milo(Woogyom) Kim <milo.kim@ti.com>
......@@ -24,7 +25,7 @@ Value : pwm based or register based
2) chip_id
The lp855x chip id.
Value : lp8550/lp8551/lp8552/lp8553/lp8556/lp8557
Value : lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
Platform data for lp855x
------------------------
......
Documentation/blockdev/floppy.txt
浏览文件 @ 348324c5
......@@ -39,15 +39,15 @@ Module configuration options
============================
If you use the floppy driver as a module, use the following syntax:
modprobe floppy <options>
modprobe floppy floppy="<options>"
Example:
modprobe floppy omnibook messages
modprobe floppy floppy="omnibook messages"
If you need certain options enabled every time you load the floppy driver,
you can put:
options floppy omnibook messages
options floppy floppy="omnibook messages"
in a configuration file in /etc/modprobe.d/.
......
Documentation/cgroups/memory.txt
浏览文件 @ 348324c5
......@@ -573,15 +573,19 @@ an memcg since the pages are allowed to be allocated from any physical
node. One of the use cases is evaluating application performance by
combining this information with the application's CPU allocation.
We export "total", "file", "anon" and "unevictable" pages per-node for
each memcg. The ouput format of memory.numa_stat is:
Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable"
per-node page counts including "hierarchical_<counter>" which sums up all
hierarchical children's values in addition to the memcg's own value.
The ouput format of memory.numa_stat is:
total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
hierarchical_<counter>=<counter pages> N0=<node 0 pages> N1=<node 1 pages> ...
And we have total = file + anon + unevictable.
The "total" count is sum of file + anon + unevictable.
6. Hierarchy support
......
Documentation/connector/ucon.c
浏览文件 @ 348324c5
......@@ -71,7 +71,7 @@ static int netlink_send(int s, struct cn_msg *msg)
nlh->nlmsg_seq = seq++;
nlh->nlmsg_pid = getpid();
nlh->nlmsg_type = NLMSG_DONE;
nlh->nlmsg_len = NLMSG_LENGTH(size - sizeof(*nlh));
nlh->nlmsg_len = size;
nlh->nlmsg_flags = 0;
m = NLMSG_DATA(nlh);
......
Documentation/cpu-freq/cpu-drivers.txt
浏览文件 @ 348324c5
......@@ -23,8 +23,8 @@ Contents:
1.1 Initialization
1.2 Per-CPU Initialization
1.3 verify
1.4 target or setpolicy?
1.5 target
1.4 target/target_index or setpolicy?
1.5 target/target_index
1.6 setpolicy
2. Frequency Table Helpers
......@@ -56,7 +56,8 @@ cpufreq_driver.init - A pointer to the per-CPU initialization
cpufreq_driver.verify - A pointer to a "verification" function.
cpufreq_driver.setpolicy _or_
cpufreq_driver.target - See below on the differences.
cpufreq_driver.target/
target_index - See below on the differences.
And optionally
......@@ -66,7 +67,7 @@ cpufreq_driver.resume - A pointer to a per-CPU resume function
which is called with interrupts disabled
and _before_ the pre-suspend frequency
and/or policy is restored by a call to
->target or ->setpolicy.
->target/target_index or ->setpolicy.
cpufreq_driver.attr - A pointer to a NULL-terminated list of
"struct freq_attr" which allow to
......@@ -103,8 +104,8 @@ policy->governor must contain the "default policy" for
this CPU. A few moments later,
cpufreq_driver.verify and either
cpufreq_driver.setpolicy or
cpufreq_driver.target is called with
these values.
cpufreq_driver.target/target_index is called
with these values.
For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
frequency table helpers might be helpful. See the section 2 for more information
......@@ -133,20 +134,28 @@ range) is within policy->min and policy->max. If necessary, increase
policy->max first, and only if this is no solution, decrease policy->min.
1.4 target or setpolicy?
1.4 target/target_index or setpolicy?
----------------------------
Most cpufreq drivers or even most cpu frequency scaling algorithms
only allow the CPU to be set to one frequency. For these, you use the
->target call.
->target/target_index call.
Some cpufreq-capable processors switch the frequency between certain
limits on their own. These shall use the ->setpolicy call
1.4. target
1.4. target/target_index
-------------
The target_index call has two arguments: struct cpufreq_policy *policy,
and unsigned int index (into the exposed frequency table).
The CPUfreq driver must set the new frequency when called here. The
actual frequency must be determined by freq_table[index].frequency.
Deprecated:
----------
The target call has three arguments: struct cpufreq_policy *policy,
unsigned int target_frequency, unsigned int relation.
......
Documentation/cpu-freq/governors.txt
浏览文件 @ 348324c5
......@@ -40,7 +40,7 @@ Most cpufreq drivers (in fact, all except one, longrun) or even most
cpu frequency scaling algorithms only offer the CPU to be set to one
frequency. In order to offer dynamic frequency scaling, the cpufreq
core must be able to tell these drivers of a "target frequency". So
these specific drivers will be transformed to offer a "->target"
these specific drivers will be transformed to offer a "->target/target_index"
call instead of the existing "->setpolicy" call. For "longrun", all
stays the same, though.
......@@ -71,7 +71,7 @@ CPU can be set to switch independently | CPU can only be set
/ the limits of policy->{min,max}
/ \
/ \
Using the ->setpolicy call, Using the ->target call,
Using the ->setpolicy call, Using the ->target/target_index call,
the limits and the the frequency closest
"policy" is set. to target_freq is set.
It is assured that it
......
Documentation/cpu-hotplug.txt
浏览文件 @ 348324c5
......@@ -5,7 +5,7 @@
Rusty Russell <rusty@rustcorp.com.au>
Srivatsa Vaddagiri <vatsa@in.ibm.com>
i386:
Zwane Mwaikambo <zwane@arm.linux.org.uk>
Zwane Mwaikambo <zwanem@gmail.com>
ppc64:
Nathan Lynch <nathanl@austin.ibm.com>
Joel Schopp <jschopp@austin.ibm.com>
......
Documentation/cpuidle/governor.txt
浏览文件 @ 348324c5
......@@ -25,5 +25,4 @@ kernel configuration and platform will be selected by cpuidle.
Interfaces:
extern int cpuidle_register_governor(struct cpuidle_governor *gov);
extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
struct cpuidle_governor
Documentation/device-mapper/cache-policies.txt
浏览文件 @ 348324c5
......@@ -30,8 +30,10 @@ multiqueue
This policy is the default.
The multiqueue policy has two sets of 16 queues: one set for entries
waiting for the cache and another one for those in the cache.
The multiqueue policy has three sets of 16 queues: one set for entries
waiting for the cache and another two for those in the cache (a set for
clean entries and a set for dirty entries).
Cache entries in the queues are aged based on logical time. Entry into
the cache is based on variable thresholds and queue selection is based
on hit count on entry. The policy aims to take different cache miss
......
Documentation/device-mapper/cache.txt
浏览文件 @ 348324c5
......@@ -68,10 +68,11 @@ So large block sizes are bad because they waste cache space. And small
block sizes are bad because they increase the amount of metadata (both
in core and on disk).
Writeback/writethrough
----------------------
Cache operating modes
---------------------
The cache has two modes, writeback and writethrough.
The cache has three operating modes: writeback, writethrough and
passthrough.
If writeback, the default, is selected then a write to a block that is
cached will go only to the cache and the block will be marked dirty in
......@@ -81,8 +82,31 @@ If writethrough is selected then a write to a cached block will not
complete until it has hit both the origin and cache devices. Clean
blocks should remain clean.
If passthrough is selected, useful when the cache contents are not known
to be coherent with the origin device, then all reads are served from
the origin device (all reads miss the cache) and all writes are
forwarded to the origin device; additionally, write hits cause cache
block invalidates. To enable passthrough mode the cache must be clean.
Passthrough mode allows a cache device to be activated without having to
worry about coherency. Coherency that exists is maintained, although
the cache will gradually cool as writes take place. If the coherency of
the cache can later be verified, or established through use of the
"invalidate_cblocks" message, the cache device can be transitioned to
writethrough or writeback mode while still warm. Otherwise, the cache
contents can be discarded prior to transitioning to the desired
operating mode.
A simple cleaner policy is provided, which will clean (write back) all
dirty blocks in a cache. Useful for decommissioning a cache.
dirty blocks in a cache. Useful for decommissioning a cache or when
shrinking a cache. Shrinking the cache's fast device requires all cache
blocks, in the area of the cache being removed, to be clean. If the
area being removed from the cache still contains dirty blocks the resize
will fail. Care must be taken to never reduce the volume used for the
cache's fast device until the cache is clean. This is of particular
importance if writeback mode is used. Writethrough and passthrough
modes already maintain a clean cache. Future support to partially clean
the cache, above a specified threshold, will allow for keeping the cache
warm and in writeback mode during resize.
Migration throttling
--------------------
......@@ -161,7 +185,7 @@ Constructor
block size : cache unit size in sectors
#feature args : number of feature arguments passed
feature args : writethrough. (The default is writeback.)
feature args : writethrough or passthrough (The default is writeback.)
policy : the replacement policy to use
#policy args : an even number of arguments corresponding to
......@@ -177,6 +201,13 @@ Optional feature arguments are:
back cache block contents later for performance reasons,
so they may differ from the corresponding origin blocks.
passthrough : a degraded mode useful for various cache coherency
situations (e.g., rolling back snapshots of
underlying storage). Reads and writes always go to
the origin. If a write goes to a cached origin
block, then the cache block is invalidated.
To enable passthrough mode the cache must be clean.
A policy called 'default' is always registered. This is an alias for
the policy we currently think is giving best all round performance.
......@@ -231,12 +262,28 @@ The message format is:
E.g.
dmsetup message my_cache 0 sequential_threshold 1024
Invalidation is removing an entry from the cache without writing it
back. Cache blocks can be invalidated via the invalidate_cblocks
message, which takes an arbitrary number of cblock ranges. Each cblock
range's end value is "one past the end", meaning 5-10 expresses a range
of values from 5 to 9. Each cblock must be expressed as a decimal
value, in the future a variant message that takes cblock ranges
expressed in hexidecimal may be needed to better support efficient
invalidation of larger caches. The cache must be in passthrough mode
when invalidate_cblocks is used.
invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
E.g.
dmsetup message my_cache 0 invalidate_cblocks 2345 3456-4567 5678-6789
Examples
========
The test suite can be found here:
https://github.com/jthornber/thinp-test-suite
https://github.com/jthornber/device-mapper-test-suite
dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
/dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'
......
Documentation/device-mapper/dm-crypt.txt
浏览文件 @ 348324c5
......@@ -4,12 +4,15 @@ dm-crypt
Device-Mapper's "crypt" target provides transparent encryption of block devices
using the kernel crypto API.
For a more detailed description of supported parameters see:
http://code.google.com/p/cryptsetup/wiki/DMCrypt
Parameters: <cipher> <key> <iv_offset> <device path> \
<offset> [<#opt_params> <opt_params>]
<cipher>
Encryption cipher and an optional IV generation mode.
(In format cipher[:keycount]-chainmode-ivopts:ivmode).
(In format cipher[:keycount]-chainmode-ivmode[:ivopts]).
Examples:
des
aes-cbc-essiv:sha256
......@@ -19,7 +22,11 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
<key>
Key used for encryption. It is encoded as a hexadecimal number.
You can only use key sizes that are valid for the selected cipher.
You can only use key sizes that are valid for the selected cipher
in combination with the selected iv mode.
Note that for some iv modes the key string can contain additional
keys (for example IV seed) so the key contains more parts concatenated
into a single string.
<keycount>
Multi-key compatibility mode. You can define <keycount> keys and
......
Documentation/devices.txt
浏览文件 @ 348324c5
......@@ -414,6 +414,7 @@ Your cooperation is appreciated.
200 = /dev/net/tun TAP/TUN network device
201 = /dev/button/gulpb Transmeta GULP-B buttons
202 = /dev/emd/ctl Enhanced Metadisk RAID (EMD) control
203 = /dev/cuse Cuse (character device in user-space)
204 = /dev/video/em8300 EM8300 DVD decoder control
205 = /dev/video/em8300_mv EM8300 DVD decoder video
206 = /dev/video/em8300_ma EM8300 DVD decoder audio
......
Documentation/devicetree/bindings/arc/pmu.txt 0 → 100644
浏览文件 @ 348324c5
* ARC Performance Monitor Unit
The ARC 700 can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits.
Note that:
* ARC 700 refers to a family of ARC processor cores;
- There is only one type of PMU available for the whole family;
- The PMU may support different sets of events; supported events are probed
at boot time, as required by the reference manual.
* The ARC 700 PMU does not support interrupts; although HW events may be
counted, the HW events themselves cannot serve as a trigger for a sample.
Required properties:
- compatible : should contain
"snps,arc700-pmu"
Example:
pmu {
compatible = "snps,arc700-pmu";
};
Documentation/devicetree/bindings/arm/arm-boards
浏览文件 @ 348324c5
......@@ -9,9 +9,53 @@ Required properties (in root node):
FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
In the root node the Integrator/CP must have a /cpcon node pointing
to the CP control registers, and the Integrator/AP must have a
/syscon node pointing to the Integrator/AP system controller.
Required nodes:
- core-module: the root node to the Integrator platforms must have
a core-module with regs and the compatible string
"arm,core-module-integrator"
Required properties for the core module:
- regs: the location and size of the core module registers, one
range of 0x200 bytes.
- syscon: the root node of the Integrator platforms must have a
system controller node pointong to the control registers,
with the compatible string
"arm,integrator-ap-syscon"
"arm,integrator-cp-syscon"
respectively.
Required properties for the system controller:
- regs: the location and size of the system controller registers,
one range of 0x100 bytes.
Required properties for the AP system controller:
- interrupts: the AP syscon node must include the logical module
interrupts, stated in order of module instance <module 0>,
<module 1>, <module 2> ... for the CP system controller this
is not required not of any use.
/dts-v1/;
/include/ "integrator.dtsi"
/ {
model = "ARM Integrator/AP";
compatible = "arm,integrator-ap";
core-module@10000000 {
compatible = "arm,core-module-integrator";
reg = <0x10000000 0x200>;
};
syscon {
compatible = "arm,integrator-ap-syscon";
reg = <0x11000000 0x100>;
interrupt-parent = <&pic>;
/* These are the logic module IRQs */
interrupts = <9>, <10>, <11>, <12>;
};
};
ARM Versatile Application and Platform Baseboards
......
Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
浏览文件 @ 348324c5
......@@ -4,6 +4,8 @@ Marvell Armada 370 and Armada XP Interrupt Controller
Required properties:
- compatible: Should be "marvell,mpic"
- interrupt-controller: Identifies the node as an interrupt controller.
- msi-controller: Identifies the node as an PCI Message Signaled
Interrupt controller.
- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
The cell is the IRQ number
......@@ -24,6 +26,7 @@ Example:
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
msi-controller;
reg = <0xd0020a00 0x1d0>,
<0xd0021070 0x58>;
};
Documentation/devicetree/bindings/arm/atmel-adc.txt
浏览文件 @ 348324c5
......@@ -7,7 +7,6 @@ Required properties:
- interrupts: Should contain the IRQ line for the ADC
- atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
device
- atmel,adc-num-channels: Number of channels available in the ADC
- atmel,adc-startup-time: Startup Time of the ADC in microseconds as
defined in the datasheet
- atmel,adc-vref: Reference voltage in millivolts for the conversions
......@@ -24,6 +23,13 @@ Optional properties:
resolution will be used.
- atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
- atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
- atmel,adc-ts-wires: Number of touch screen wires. Should be 4 or 5. If this
value is set, then adc driver will enable touch screen
support.
NOTE: when adc touch screen enabled, the adc hardware trigger will be
disabled. Since touch screen will occupied the trigger register.
- atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It
make touch detect more precision.
Optional trigger Nodes:
- Required properties:
......
Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
浏览文件 @ 348324c5
Calxeda DDR memory controller
Properties:
- compatible : Should be "calxeda,hb-ddr-ctrl"
- compatible : Should be:
- "calxeda,hb-ddr-ctrl" for ECX-1000
- "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
- reg : Address and size for DDR controller registers.
- interrupts : Interrupt for DDR controller.
......
Documentation/devicetree/bindings/arm/cci.txt
浏览文件 @ 348324c5
......@@ -36,14 +36,18 @@ specific to ARM.
- reg
Usage: required
Value type: <prop-encoded-array>
Value type: Integer cells. A register entry, expressed as a pair
of cells, containing base and size.
Definition: A standard property. Specifies base physical
address of CCI control registers common to all
interfaces.
- ranges:
Usage: required
Value type: <prop-encoded-array>
Value type: Integer cells. An array of range entries, expressed
as a tuple of cells, containing child address,
parent address and the size of the region in the
child address space.
Definition: A standard property. Follow rules in the ePAPR for
hierarchical bus addressing. CCI interfaces
addresses refer to the parent node addressing
......@@ -74,11 +78,49 @@ specific to ARM.
- reg:
Usage: required
Value type: <prop-encoded-array>
Value type: Integer cells. A register entry, expressed
as a pair of cells, containing base and
size.
Definition: the base address and size of the
corresponding interface programming
registers.
- CCI PMU node
Parent node must be CCI interconnect node.
A CCI pmu node must contain the following properties:
- compatible
Usage: required
Value type: <string>
Definition: must be "arm,cci-400-pmu"
- reg:
Usage: required
Value type: Integer cells. A register entry, expressed
as a pair of cells, containing base and
size.
Definition: the base address and size of the
corresponding interface programming
registers.
- interrupts:
Usage: required
Value type: Integer cells. Array of interrupt specifier
entries, as defined in
../interrupt-controller/interrupts.txt.
Definition: list of counter overflow interrupts, one per
counter. The interrupts must be specified
starting with the cycle counter overflow
interrupt, followed by counter0 overflow
interrupt, counter1 overflow interrupt,...
,counterN overflow interrupt.
The CCI PMU has an interrupt signal for each
counter. The number of interrupts must be
equal to the number of counters.
* CCI interconnect bus masters
Description: masters in the device tree connected to a CCI port
......@@ -144,7 +186,7 @@ Example:
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x2c090000 0 0x1000>;
ranges = <0x0 0x0 0x2c090000 0x6000>;
ranges = <0x0 0x0 0x2c090000 0x10000>;
cci_control0: slave-if@1000 {
compatible = "arm,cci-400-ctrl-if";
......@@ -163,6 +205,16 @@ Example:
interface-type = "ace";
reg = <0x5000 0x1000>;
};
pmu@9000 {
compatible = "arm,cci-400-pmu";
reg = <0x9000 0x5000>;
interrupts = <0 101 4>,
<0 102 4>,
<0 103 4>,
<0 104 4>,
<0 105 4>;
};
};
This CCI node corresponds to a CCI component whose control registers sits
......
Documentation/devicetree/bindings/arm/cpus.txt
浏览文件 @ 348324c5
* ARM CPUs binding description
=================
ARM CPUs bindings
=================
The device tree allows to describe the layout of CPUs in a system through
the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
defining properties for every cpu.
Bindings for CPU nodes follow the ePAPR standard, available from:
http://devicetree.org
For the ARM architecture every CPU node must contain the following properties:
- device_type: must be "cpu"
- reg: property matching the CPU MPIDR[23:0] register bits
reg[31:24] bits must be set to 0
- compatible: should be one of:
"arm,arm1020"
"arm,arm1020e"
"arm,arm1022"
"arm,arm1026"
"arm,arm720"
"arm,arm740"
"arm,arm7tdmi"
"arm,arm920"
"arm,arm922"
"arm,arm925"
"arm,arm926"
"arm,arm940"
"arm,arm946"
"arm,arm9tdmi"
"arm,cortex-a5"
"arm,cortex-a7"
"arm,cortex-a8"
"arm,cortex-a9"
"arm,cortex-a15"
"arm,arm1136"
"arm,arm1156"
"arm,arm1176"
"arm,arm11mpcore"
"faraday,fa526"
"intel,sa110"
"intel,sa1100"
"marvell,feroceon"
"marvell,mohawk"
"marvell,xsc3"
"marvell,xscale"
Example:
Bindings for CPU nodes follow the ePAPR v1.1 standard, available from:
https://www.power.org/documentation/epapr-version-1-1/
with updates for 32-bit and 64-bit ARM systems provided in this document.
================================
Convention used in this document
================================
This document follows the conventions described in the ePAPR v1.1, with
the addition:
- square brackets define bitfields, eg reg[7:0] value of the bitfield in
the reg property contained in bits 7 down to 0
=====================================
cpus and cpu node bindings definition
=====================================
The ARM architecture, in accordance with the ePAPR, requires the cpus and cpu
nodes to be present and contain the properties described below.
- cpus node
Description: Container of cpu nodes
The node name must be "cpus".
A cpus node must define the following properties:
- #address-cells
Usage: required
Value type: <u32>
Definition depends on ARM architecture version and
configuration:
# On uniprocessor ARM architectures previous to v7
value must be 1, to enable a simple enumeration
scheme for processors that do not have a HW CPU
identification register.
# On 32-bit ARM 11 MPcore, ARM v7 or later systems
value must be 1, that corresponds to CPUID/MPIDR
registers sizes.
# On ARM v8 64-bit systems value should be set to 2,
that corresponds to the MPIDR_EL1 register size.
If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
in the system, #address-cells can be set to 1, since
MPIDR_EL1[63:32] bits are not used for CPUs
identification.
- #size-cells
Usage: required
Value type: <u32>
Definition: must be set to 0
- cpu node
Description: Describes a CPU in an ARM based system
PROPERTIES
- device_type
Usage: required
Value type: <string>
Definition: must be "cpu"
- reg
Usage and definition depend on ARM architecture version and
configuration:
# On uniprocessor ARM architectures previous to v7
this property is required and must be set to 0.
# On ARM 11 MPcore based systems this property is
required and matches the CPUID[11:0] register bits.
Bits [11:0] in the reg cell must be set to
bits [11:0] in CPU ID register.
All other bits in the reg cell must be set to 0.
# On 32-bit ARM v7 or later systems this property is
required and matches the CPU MPIDR[23:0] register
bits.
Bits [23:0] in the reg cell must be set to
bits [23:0] in MPIDR.
All other bits in the reg cell must be set to 0.
# On ARM v8 64-bit systems this property is required
and matches the MPIDR_EL1 register affinity bits.
* If cpus node's #address-cells property is set to 2
The first reg cell bits [7:0] must be set to
bits [39:32] of MPIDR_EL1.
The second reg cell bits [23:0] must be set to
bits [23:0] of MPIDR_EL1.
* If cpus node's #address-cells property is set to 1
The reg cell bits [23:0] must be set to bits [23:0]
of MPIDR_EL1.
All other bits in the reg cells must be set to 0.
- compatible:
Usage: required
Value type: <string>
Definition: should be one of:
"arm,arm710t"
"arm,arm720t"
"arm,arm740t"
"arm,arm7ej-s"
"arm,arm7tdmi"
"arm,arm7tdmi-s"
"arm,arm9es"
"arm,arm9ej-s"
"arm,arm920t"
"arm,arm922t"
"arm,arm925"
"arm,arm926e-s"
"arm,arm926ej-s"
"arm,arm940t"
"arm,arm946e-s"
"arm,arm966e-s"
"arm,arm968e-s"
"arm,arm9tdmi"
"arm,arm1020e"
"arm,arm1020t"
"arm,arm1022e"
"arm,arm1026ej-s"
"arm,arm1136j-s"
"arm,arm1136jf-s"
"arm,arm1156t2-s"
"arm,arm1156t2f-s"
"arm,arm1176jzf"
"arm,arm1176jz-s"
"arm,arm1176jzf-s"
"arm,arm11mpcore"
"arm,cortex-a5"
"arm,cortex-a7"
"arm,cortex-a8"
"arm,cortex-a9"
"arm,cortex-a15"
"arm,cortex-a53"
"arm,cortex-a57"
"arm,cortex-m0"
"arm,cortex-m0+"
"arm,cortex-m1"
"arm,cortex-m3"
"arm,cortex-m4"
"arm,cortex-r4"
"arm,cortex-r5"
"arm,cortex-r7"
"faraday,fa526"
"intel,sa110"
"intel,sa1100"
"marvell,feroceon"
"marvell,mohawk"
"marvell,pj4a"
"marvell,pj4b"
"marvell,sheeva-v5"
"qcom,krait"
"qcom,scorpion"
- enable-method
Value type: <stringlist>
Usage and definition depend on ARM architecture version.
# On ARM v8 64-bit this property is required and must
be one of:
"spin-table"
"psci"
# On ARM 32-bit systems this property is optional.
- cpu-release-addr
Usage: required for systems that have an "enable-method"
property value of "spin-table".
Value type: <prop-encoded-array>
Definition:
# On ARM v8 64-bit systems must be a two cell
property identifying a 64-bit zero-initialised
memory location.
Example 1 (dual-cluster big.LITTLE system 32-bit):
cpus {
#size-cells = <0>;
#address-cells = <1>;
CPU0: cpu@0 {
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
};
CPU1: cpu@1 {
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
};
CPU2: cpu@100 {
cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
};
CPU3: cpu@101 {
cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
};
};
Example 2 (Cortex-A8 uniprocessor 32-bit system):
cpus {
#size-cells = <0>;
#address-cells = <1>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
};
};
Example 3 (ARM 926EJ-S uniprocessor 32-bit system):
cpus {
#size-cells = <0>;
#address-cells = <1>;
cpu@0 {
device_type = "cpu";
compatible = "arm,arm926ej-s";
reg = <0x0>;
};
};
Example 4 (ARM Cortex-A57 64-bit system):
cpus {
#size-cells = <0>;
#address-cells = <2>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@10000 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x10000>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@10001 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x10001>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@10100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x10100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@10101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x10101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100000000 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100000001 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100000100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100000101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100010000 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x10000>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100010001 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x10001>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100010100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x10100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
cpu@100010101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x10101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
};
Documentation/devicetree/bindings/arm/omap/mpu.txt
浏览文件 @ 348324c5
......@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
Required properties:
- compatible : Should be "ti,omap3-mpu" for OMAP3
Should be "ti,omap4-mpu" for OMAP4
Should be "ti,omap5-mpu" for OMAP5
- ti,hwmods: "mpu"
Examples:
- For an OMAP5 SMP system:
mpu {
compatible = "ti,omap5-mpu";
ti,hwmods = "mpu"
};
- For an OMAP4 SMP system:
mpu {
......
Documentation/devicetree/bindings/arm/omap/omap.txt
浏览文件 @ 348324c5
......@@ -21,7 +21,8 @@ Required properties:
Optional properties:
- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
during suspend.
- ti,no-reset-on-init: When present, the module should not be reset at init
- ti,no-idle-on-init: When present, the module should not be idled at init
Example:
......
Documentation/devicetree/bindings/arm/pmu.txt
浏览文件 @ 348324c5
......@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
Required properties:
- compatible : should be one of
"arm,armv8-pmuv3"
"arm,cortex-a15-pmu"
"arm,cortex-a9-pmu"
"arm,cortex-a8-pmu"
......
Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
浏览文件 @ 348324c5
......@@ -49,7 +49,7 @@ adc@12D10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
pullup-uV = <1800000>;
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
......
Documentation/devicetree/bindings/arm/topology.txt 0 → 100644
浏览文件 @ 348324c5
===========================================
ARM topology binding description
===========================================
===========================================
1 - Introduction
===========================================
In an ARM system, the hierarchy of CPUs is defined through three entities that
are used to describe the layout of physical CPUs in the system:
- cluster
- core
- thread
The cpu nodes (bindings defined in [1]) represent the devices that
correspond to physical CPUs and are to be mapped to the hierarchy levels.
The bottom hierarchy level sits at core or thread level depending on whether
symmetric multi-threading (SMT) is supported or not.
For instance in a system where CPUs support SMT, "cpu" nodes represent all
threads existing in the system and map to the hierarchy level "thread" above.
In systems where SMT is not supported "cpu" nodes represent all cores present
in the system and map to the hierarchy level "core" above.
ARM topology bindings allow one to associate cpu nodes with hierarchical groups
corresponding to the system hierarchy; syntactically they are defined as device
tree nodes.
The remainder of this document provides the topology bindings for ARM, based
on the ePAPR standard, available from:
http://www.power.org/documentation/epapr-version-1-1/
If not stated otherwise, whenever a reference to a cpu node phandle is made its
value must point to a cpu node compliant with the cpu node bindings as
documented in [1].
A topology description containing phandles to cpu nodes that are not compliant
with bindings standardized in [1] is therefore considered invalid.
===========================================
2 - cpu-map node
===========================================
The ARM CPU topology is defined within the cpu-map node, which is a direct
child of the cpus node and provides a container where the actual topology
nodes are listed.
- cpu-map node
Usage: Optional - On ARM SMP systems provide CPUs topology to the OS.
ARM uniprocessor systems do not require a topology
description and therefore should not define a
cpu-map node.
Description: The cpu-map node is just a container node where its
subnodes describe the CPU topology.
Node name must be "cpu-map".
The cpu-map node's parent node must be the cpus node.
The cpu-map node's child nodes can be:
- one or more cluster nodes
Any other configuration is considered invalid.
The cpu-map node can only contain three types of child nodes:
- cluster node
- core node
- thread node
whose bindings are described in paragraph 3.
The nodes describing the CPU topology (cluster/core/thread) can only be
defined within the cpu-map node.
Any other configuration is consider invalid and therefore must be ignored.
===========================================
2.1 - cpu-map child nodes naming convention
===========================================
cpu-map child nodes must follow a naming convention where the node name
must be "clusterN", "coreN", "threadN" depending on the node type (ie
cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which
are siblings within a single common parent node must be given a unique and
sequential N value, starting from 0).
cpu-map child nodes which do not share a common parent node can have the same
name (ie same number N as other cpu-map child nodes at different device tree
levels) since name uniqueness will be guaranteed by the device tree hierarchy.
===========================================
3 - cluster/core/thread node bindings
===========================================
Bindings for cluster/cpu/thread nodes are defined as follows:
- cluster node
Description: must be declared within a cpu-map node, one node
per cluster. A system can contain several layers of
clustering and cluster nodes can be contained in parent
cluster nodes.
The cluster node name must be "clusterN" as described in 2.1 above.
A cluster node can not be a leaf node.
A cluster node's child nodes must be:
- one or more cluster nodes; or
- one or more core nodes
Any other configuration is considered invalid.
- core node
Description: must be declared in a cluster node, one node per core in
the cluster. If the system does not support SMT, core
nodes are leaf nodes, otherwise they become containers of
thread nodes.
The core node name must be "coreN" as described in 2.1 above.
A core node must be a leaf node if SMT is not supported.
Properties for core nodes that are leaf nodes:
- cpu
Usage: required
Value type: <phandle>
Definition: a phandle to the cpu node that corresponds to the
core node.
If a core node is not a leaf node (CPUs supporting SMT) a core node's
child nodes can be:
- one or more thread nodes
Any other configuration is considered invalid.
- thread node
Description: must be declared in a core node, one node per thread
in the core if the system supports SMT. Thread nodes are
always leaf nodes in the device tree.
The thread node name must be "threadN" as described in 2.1 above.
A thread node must be a leaf node.
A thread node must contain the following property:
- cpu
Usage: required
Value type: <phandle>
Definition: a phandle to the cpu node that corresponds to
the thread node.
===========================================
4 - Example dts
===========================================
Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters):
cpus {
#size-cells = <0>;
#address-cells = <2>;
cpu-map {
cluster0 {
cluster0 {
core0 {
thread0 {
cpu = <&CPU0>;
};
thread1 {
cpu = <&CPU1>;
};
};
core1 {
thread0 {
cpu = <&CPU2>;
};
thread1 {
cpu = <&CPU3>;
};
};
};
cluster1 {
core0 {
thread0 {
cpu = <&CPU4>;
};
thread1 {
cpu = <&CPU5>;
};
};
core1 {
thread0 {
cpu = <&CPU6>;
};
thread1 {
cpu = <&CPU7>;
};
};
};
};
cluster1 {
cluster0 {
core0 {
thread0 {
cpu = <&CPU8>;
};
thread1 {
cpu = <&CPU9>;
};
};
core1 {
thread0 {
cpu = <&CPU10>;
};
thread1 {
cpu = <&CPU11>;
};
};
};
cluster1 {
core0 {
thread0 {
cpu = <&CPU12>;
};
thread1 {
cpu = <&CPU13>;
};
};
core1 {
thread0 {
cpu = <&CPU14>;
};
thread1 {
cpu = <&CPU15>;
};
};
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU4: cpu@10000 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x10000>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU5: cpu@10001 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x10001>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU6: cpu@10100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x10100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU7: cpu@10101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x10101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU8: cpu@100000000 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU9: cpu@100000001 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU10: cpu@100000100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU11: cpu@100000101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU12: cpu@100010000 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x10000>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU13: cpu@100010001 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x10001>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU14: cpu@100010100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x10100>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
CPU15: cpu@100010101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1 0x10101>;
enable-method = "spin-table";
cpu-release-addr = <0 0x20000000>;
};
};
Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
cpus {
#size-cells = <0>;
#address-cells = <1>;
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
cluster1 {
core0 {
cpu = <&CPU4>;
};
core1 {
cpu = <&CPU5>;
};
core2 {
cpu = <&CPU6>;
};
core3 {
cpu = <&CPU7>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
};
CPU4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
};
CPU5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
};
CPU6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
};
CPU7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x103>;
};
};
===============================================================================
[1] ARM Linux kernel documentation
Documentation/devicetree/bindings/arm/cpus.txt
Documentation/devicetree/bindings/arm/vic.txt
浏览文件 @ 348324c5
......@@ -18,6 +18,15 @@ Required properties:
Optional properties:
- interrupts : Interrupt source for parent controllers if the VIC is nested.
- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit
represents single interrupt source, starting from source 0 at LSb and ending
at source 31 at MSb. A bit that is set means that the source is wired and
clear means otherwise. If unspecified, defaults to all valid.
- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be
configured as wake up source for the system. Order of bits is the same as for
valid-mask property. A set bit means that this interrupt source can be
configured as a wake up source for the system. If unspecied, defaults to all
interrupt sources configurable as wake up sources.
Example:
......@@ -26,4 +35,7 @@ Example:
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x60000 0x1000>;
valid-mask = <0xffffff7f>;
valid-wakeup-mask = <0x0000ff7f>;
};
Documentation/devicetree/bindings/clock/efm32-clock.txt 0 → 100644
浏览文件 @ 348324c5
* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
Required properties:
- compatible: Should be "efm32gg,cmu"
- reg: Base address and length of the register set
- interrupts: Interrupt used by the CMU
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock ID in
its "clocks" phandle cell. The header efm32-clk.h contains a list of available
IDs.
Documentation/devicetree/bindings/clock/exynos4-clock.txt
浏览文件 @ 348324c5
......@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
- "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
......
Documentation/devicetree/bindings/clock/exynos5250-clock.txt
浏览文件 @ 348324c5
......@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
- reg: physical base address of the controller and length of memory mapped
......
Documentation/devicetree/bindings/clock/exynos5420-clock.txt
浏览文件 @ 348324c5
......@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
- reg: physical base address of the controller and length of memory mapped
......
Documentation/devicetree/bindings/clock/exynos5440-clock.txt
浏览文件 @ 348324c5
......@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
Required Properties:
- comptible: should be "samsung,exynos5440-clock".
- compatible: should be "samsung,exynos5440-clock".
- reg: physical base address of the controller and length of memory mapped
region.
......
Documentation/devicetree/bindings/clock/imx6q-clock.txt
浏览文件 @ 348324c5
......@@ -215,6 +215,11 @@ clocks and IDs.
cko2 200
cko 201
vdoa 202
pll4_audio_div 203
lvds1_sel 204
lvds2_sel 205
lvds1_gate 206
lvds2_gate 207
Examples:
......
Documentation/devicetree/bindings/clock/keystone-gate.txt 0 → 100644
浏览文件 @ 348324c5
Status: Unstable - ABI compatibility may be broken in the future
Binding for Keystone gate control driver which uses PSC controller IP.
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be "ti,keystone,psc-clock".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : parent clock phandle
- reg : psc control and domain address address space
- reg-names : psc control and domain registers
- domain-id : psc domain id needed to check the transition state register
Optional properties:
- clock-output-names : From common clock binding to override the
default output clock name
Example:
clkusb: clkusb {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk16>;
clock-output-names = "usb";
reg = <0x02350008 0xb00>, <0x02350000 0x400>;
reg-names = "control", "domain";
domain-id = <0>;
};
Documentation/devicetree/bindings/clock/keystone-pll.txt 0 → 100644
浏览文件 @ 348324c5
Status: Unstable - ABI compatibility may be broken in the future
Binding for keystone PLLs. The main PLL IP typically has a multiplier,
a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
and PAPLL are controlled by the memory mapped register where as the Main
PLL is controlled by a PLL controller registers along with memory mapped
registers.
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- #clock-cells : from common clock binding; shall be set to 0.
- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
- clocks : parent clock phandle
- reg - pll control0 and pll multipler registers
- reg-names : control and multiplier. The multiplier is applicable only for
main pll clock
- fixed-postdiv : fixed post divider value
Example:
mainpllclk: mainpllclk@2310110 {
#clock-cells = <0>;
compatible = "ti,keystone,main-pll-clock";
clocks = <&refclkmain>;
reg = <0x02620350 4>, <0x02310110 4>;
reg-names = "control", "multiplier";
fixed-postdiv = <2>;
};
papllclk: papllclk@2620358 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
clocks = <&refclkmain>;
clock-output-names = "pa-pll-clk";
reg = <0x02620358 4>;
reg-names = "control";
fixed-postdiv = <6>;
};
Required properties:
- #clock-cells : from common clock binding; shall be set to 0.
- compatible : shall be "ti,keystone,pll-mux-clock"
- clocks : link phandles of parent clocks
- reg - pll mux register
- bit-shift : number of bits to shift the bit-mask
- bit-mask : arbitrary bitmask for programming the mux
Optional properties:
- clock-output-names : From common clock binding.
Example:
mainmuxclk: mainmuxclk@2310108 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-mux-clock";
clocks = <&mainpllclk>, <&refclkmain>;
reg = <0x02310108 4>;
bit-shift = <23>;
bit-mask = <1>;
clock-output-names = "mainmuxclk";
};
Required properties:
- #clock-cells : from common clock binding; shall be set to 0.
- compatible : shall be "ti,keystone,pll-divider-clock"
- clocks : parent clock phandle
- reg - pll mux register
- bit-shift : number of bits to shift the bit-mask
- bit-mask : arbitrary bitmask for programming the divider
Optional properties:
- clock-output-names : From common clock binding.
Example:
gemtraceclk: gemtraceclk@2310120 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-divider-clock";
clocks = <&mainmuxclk>;
reg = <0x02310120 4>;
bit-shift = <0>;
bit-mask = <8>;
clock-output-names = "gemtraceclk";
};
Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt 0 → 100644
浏览文件 @ 348324c5
* Core Divider Clock bindings for Marvell MVEBU SoCs
The following is a list of provided IDs and clock names on Armada 370/XP:
0 = nand (NAND clock)
Required properties:
- compatible : must be "marvell,armada-370-corediv-clock"
- reg : must be the register address of Core Divider control register
- #clock-cells : from common clock binding; shall be set to 1
- clocks : must be set to the parent's phandle
Example:
corediv_clk: corediv-clocks@18740 {
compatible = "marvell,armada-370-corediv-clock";
reg = <0x18740 0xc>;
#clock-cells = <1>;
clocks = <&pll>;
};
Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
浏览文件 @ 348324c5
* Gated Clock bindings for Marvell Orion SoCs
* Gated Clock bindings for Marvell EBU SoCs
Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
some power. The clock consumer should specify the desired clock by having
the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
the corresponding clock gating control bit in HW to ease manual clock lookup
in datasheet.
Marvell Armada 370/XP, Dove and Kirkwood allow some peripheral clocks to be
gated to save some power. The clock consumer should specify the desired clock
by having the clock ID in its "clocks" phandle cell. The clock ID is directly
mapped to the corresponding clock gating control bit in HW to ease manual clock
lookup in datasheet.
The following is a list of provided IDs for Armada 370:
ID Clock Peripheral
......@@ -94,6 +94,8 @@ ID Clock Peripheral
Required properties:
- compatible : shall be one of the following:
"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
"marvell,dove-gating-clock" - for Dove SoC clock gating
"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
- reg : shall be the register address of the Clock Gating Control register
......
Documentation/devicetree/bindings/clock/sunxi.txt
浏览文件 @ 348324c5
......@@ -45,8 +45,8 @@ Additionally, "allwinner,*-gates-clk" clocks require:
Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. The values of this
ID are documented in sunxi/<soc>-gates.txt.
provide an additional ID in their clock property. This ID is the
offset of the bit controlling this particular gate in the register.
For example:
......
Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt 已删除 100644 → 0
浏览文件 @ 1e63bd9c
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun4i-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2*
EHCI1 3
OHCI1 4*
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
MMC3 11
MS 12**
NAND 13
SDRAM 14
ACE 16
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
SPI3 23
PATA 24
SATA 25**
GPS 26*
VE 32
TVD 33
TVE0 34
TVE1 35
LCD0 36
LCD1 37
CSI0 40
CSI1 41
HDMI 43
DE_BE0 44
DE_BE1 45
DE_FE1 46
DE_FE1 47
MP 50
MALI400 52
* APB0 gates ("allwinner,sun4i-apb0-gates-clk")
CODEC 0
SPDIF 1*
AC97 2
IIS 3
PIO 5
IR0 6
IR1 7
KEYPAD 10
* APB1 gates ("allwinner,sun4i-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
CAN 4
SCR 5
PS20 6
PS21 7
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
UART6 22
UART7 23
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt 已删除 100644 → 0
浏览文件 @ 1e63bd9c
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun5i-a10s-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
NAND 13
SDRAM 14
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
GPS 26
HSTIMER 28
VE 32
TVE 34
LCD 36
CSI 40
HDMI 43
DE_BE 44
DE_FE 46
IEP 51
MALI400 52
* APB0 gates ("allwinner,sun5i-a10s-apb0-gates-clk")
CODEC 0
IIS 3
PIO 5
IR 6
KEYPAD 10
* APB1 gates ("allwinner,sun5i-a10s-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
UART0 16
UART1 17
UART2 18
UART3 19
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt 已删除 100644 → 0
浏览文件 @ 1e63bd9c
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun5i-a13-ahb-gates-clk")
USBOTG 0
EHCI 1
OHCI 2
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
NAND 13
SDRAM 14
SPI0 20
SPI1 21
SPI2 22
STIMER 28
VE 32
LCD 36
CSI 40
DE_BE 44
DE_FE 46
IEP 51
MALI400 52
* APB0 gates ("allwinner,sun5i-a13-apb0-gates-clk")
CODEC 0
PIO 5
IR 6
* APB1 gates ("allwinner,sun5i-a13-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
UART1 17
UART3 19
Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt 已删除 100644 → 0
浏览文件 @ 1e63bd9c
Gate clock outputs
------------------
* AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
MIPI DSI 1
SS 5
DMA 6
MMC0 8
MMC1 9
MMC2 10
MMC3 11
NAND1 12
NAND0 13
SDRAM 14
GMAC 17
TS 18
HSTIMER 19
SPI0 20
SPI1 21
SPI2 22
SPI3 23
USB_OTG 24
EHCI0 26
EHCI1 27
OHCI0 29
OHCI1 30
OHCI2 31
VE 32
LCD0 36
LCD1 37
CSI 40
HDMI 43
DE_BE0 44
DE_BE1 45
DE_FE1 46
DE_FE1 47
MP 50
GPU 52
DEU0 55
DEU1 56
DRC0 57
DRC1 58
* APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
CODEC 0
DIGITAL MIC 4
PIO 5
DAUDIO0 12
DAUDIO1 13
* APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
I2C0 0
I2C1 1
I2C2 2
I2C3 3
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt 已删除 100644 → 0
浏览文件 @ 1e63bd9c
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun7i-a20-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2
EHCI1 3
OHCI1 4
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
MMC3 11
MS 12
NAND 13
SDRAM 14
ACE 16
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
SPI3 23
SATA 25
HSTIMER 28
VE 32
TVD 33
TVE0 34
TVE1 35
LCD0 36
LCD1 37
CSI0 40
CSI1 41
HDMI1 42
HDMI0 43
DE_BE0 44
DE_BE1 45
DE_FE1 46
DE_FE1 47
GMAC 49
MP 50
MALI400 52
* APB0 gates ("allwinner,sun7i-a20-apb0-gates-clk")
CODEC 0
SPDIF 1
AC97 2
IIS0 3
IIS1 4
PIO 5
IR0 6
IR1 7
IIS2 8
KEYPAD 10
* APB1 gates ("allwinner,sun7i-a20-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
I2C3 3
CAN 4
SCR 5
PS20 6
PS21 7
I2C4 15
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
UART6 22
UART7 23
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Documentation/devicetree/bindings/clock/xgene.txt 0 → 100644
浏览文件 @ 348324c5
Device Tree Clock bindings for APM X-Gene
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be one of the following:
"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
"apm,xgene-device-clock" - for a X-Gene device clock
Required properties for SoC or PCP PLL clocks:
- reg : shall be the physical PLL register address for the pll clock.
- clocks : shall be the input parent clock phandle for the clock. This should
be the reference clock.
- #clock-cells : shall be set to 1.
- clock-output-names : shall be the name of the PLL referenced by derive
clock.
Optional properties for PLL clocks:
- clock-names : shall be the name of the PLL. If missing, use the device name.
Required properties for device clocks:
- reg : shall be a list of address and length pairs describing the CSR
reset and/or the divider. Either may be omitted, but at least
one must be present.
- reg-names : shall be a string list describing the reg resource. This
may include "csr-reg" and/or "div-reg". If this property
is not present, the reg property is assumed to describe
only "csr-reg".
- clocks : shall be the input parent clock phandle for the clock.
- #clock-cells : shall be set to 1.
- clock-output-names : shall be the name of the device referenced.
Optional properties for device clocks:
- clock-names : shall be the name of the device clock. If missing, use the
device name.
- csr-offset : Offset to the CSR reset register from the reset address base.
Default is 0.
- csr-mask : CSR reset mask bit. Default is 0xF.
- enable-offset : Offset to the enable register from the reset address base.
Default is 0x8.
- enable-mask : CSR enable mask bit. Default is 0xF.
- divider-offset : Offset to the divider CSR register from the divider base.
Default is 0x0.
- divider-width : Width of the divider register. Default is 0.
- divider-shift : Bit shift of the divider register. Default is 0.
For example:
pcppll: pcppll@17000100 {
compatible = "apm,xgene-pcppll-clock";
#clock-cells = <1>;
clocks = <&refclk 0>;
clock-names = "pcppll";
reg = <0x0 0x17000100 0x0 0x1000>;
clock-output-names = "pcppll";
type = <0>;
};
socpll: socpll@17000120 {
compatible = "apm,xgene-socpll-clock";
#clock-cells = <1>;
clocks = <&refclk 0>;
clock-names = "socpll";
reg = <0x0 0x17000120 0x0 0x1000>;
clock-output-names = "socpll";
type = <1>;
};
qmlclk: qmlclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
clock-names = "qmlclk";
reg = <0x0 0x1703C000 0x0 0x1000>;
reg-name = "csr-reg";
clock-output-names = "qmlclk";
};
ethclk: ethclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
clock-names = "ethclk";
reg = <0x0 0x17000000 0x0 0x1000>;
reg-names = "div-reg";
divider-offset = <0x238>;
divider-width = <0x9>;
divider-shift = <0x0>;
clock-output-names = "ethclk";
};
apbclk: apbclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&ahbclk 0>;
clock-names = "apbclk";
reg = <0x0 0x1F2AC000 0x0 0x1000
0x0 0x1F2AC000 0x0 0x1000>;
reg-names = "csr-reg", "div-reg";
csr-offset = <0x0>;
csr-mask = <0x200>;
enable-offset = <0x8>;
enable-mask = <0x200>;
divider-offset = <0x10>;
divider-width = <0x2>;
divider-shift = <0x0>;
flags = <0x8>;
clock-output-names = "apbclk";
};
Documentation/devicetree/bindings/crypto/omap-aes.txt 0 → 100644
浏览文件 @ 348324c5
OMAP SoC AES crypto Module
Required properties:
- compatible : Should contain entries for this and backward compatible
AES versions:
- "ti,omap2-aes" for OMAP2.
- "ti,omap3-aes" for OMAP3.
- "ti,omap4-aes" for OMAP4 and AM33XX.
Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
more algorithms) but they are incompatible with OMAP4.
- ti,hwmods: Name of the hwmod associated with the AES module
- reg : Offset and length of the register set for the module
- interrupts : the interrupt-specifier for the AES module.
Optional properties:
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "tx" and "rx" if present.
Example:
/* AM335x */
aes: aes@53500000 {
compatible = "ti,omap4-aes";
ti,hwmods = "aes";
reg = <0x53500000 0xa0>;
interrupts = <102>;
dmas = <&edma 6>,
<&edma 5>;
dma-names = "tx", "rx";
};
Documentation/devicetree/bindings/crypto/omap-des.txt 0 → 100644
浏览文件 @ 348324c5
OMAP SoC DES crypto Module
Required properties:
- compatible : Should contain "ti,omap4-des"
- ti,hwmods: Name of the hwmod associated with the DES module
- reg : Offset and length of the register set for the module
- interrupts : the interrupt-specifier for the DES module
- clocks : A phandle to the functional clock node of the DES module
corresponding to each entry in clock-names
- clock-names : Name of the functional clock, should be "fck"
Optional properties:
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
Each entry corresponds to an entry in dma-names
- dma-names: DMA request names should include "tx" and "rx" if present
Example:
/* DRA7xx SoC */
des: des@480a5000 {
compatible = "ti,omap4-des";
ti,hwmods = "des";
reg = <0x480a5000 0xa0>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 117>, <&sdma 116>;
dma-names = "tx", "rx";
clocks = <&l3_iclk_div>;
clock-names = "fck";
};
Documentation/devicetree/bindings/crypto/omap-sham.txt 0 → 100644
浏览文件 @ 348324c5
OMAP SoC SHA crypto Module
Required properties:
- compatible : Should contain entries for this and backward compatible
SHAM versions:
- "ti,omap2-sham" for OMAP2 & OMAP3.
- "ti,omap4-sham" for OMAP4 and AM33XX.
- "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
- ti,hwmods: Name of the hwmod associated with the SHAM module
- reg : Offset and length of the register set for the module
- interrupts : the interrupt-specifier for the SHAM module.
Optional properties:
- dmas: DMA specifiers for the rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request name. Should be "rx" if a dma is present.
Example:
/* AM335x */
sham: sham@53100000 {
compatible = "ti,omap4-sham";
ti,hwmods = "sham";
reg = <0x53100000 0x200>;
interrupts = <109>;
dmas = <&edma 36>;
dma-names = "rx";
};
Documentation/devicetree/bindings/dma/atmel-dma.txt
浏览文件 @ 348324c5
......@@ -28,7 +28,7 @@ The three cells in order are:
dependent:
- bit 7-0: peripheral identifier for the hardware handshaking interface. The
identifier can be different for tx and rx.
- bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
- bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
Example:
......
Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
浏览文件 @ 348324c5
......@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
See bindings/gpio/gpio.txt for details of how to specify GPIO
information for devices.
The GPIO module usually is connected to the SoC's internal interrupt
controller, see bindings/interrupt-controller/interrupts.txt (the
interrupt client nodes section) for details how to specify this GPIO
module's interrupt.
The GPIO module may serve as another interrupt controller (cascaded to
the SoC's internal interrupt controller). See the interrupt controller
nodes section in bindings/interrupt-controller/interrupts.txt for
details.
Required properties:
- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ.
- interrupt-parent : Phandle for the interrupt controller that
services interrupts for this device.
- gpio-controller : Marks the port as GPIO controller.
- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
for 83xx, "fsl,mpc8572-gpio" for 85xx, or
"fsl,mpc8610-gpio" for 86xx.
- #gpio-cells: Should be two. The first cell is the pin number
and the second cell is used to specify optional
parameters (currently unused).
- interrupt-parent: Phandle for the interrupt controller that
services interrupts for this device.
- interrupts: Interrupt mapping for GPIO IRQ.
- gpio-controller: Marks the port as GPIO controller.
Optional properties:
- interrupt-controller: Empty boolean property which marks the GPIO
module as an IRQ controller.
- #interrupt-cells: Should be two. Defines the number of integer
cells required to specify an interrupt within
this interrupt controller. The first cell
defines the pin number, the second cell
defines additional flags (trigger type,
trigger polarity). Note that the available
set of trigger conditions supported by the
GPIO module depends on the actual SoC.
Example of gpio-controller nodes for a MPC8347 SoC:
......@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
interrupts = <74 0x8>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
interrupts = <75 0x8>;
gpio-controller;
};
See booting-without-of.txt for details of how to specify GPIO
information for devices.
To use GPIO pins as interrupt sources for peripherals, specify the
GPIO controller as the interrupt parent and define GPIO number +
trigger mode using the interrupts property, which is defined like
this:
interrupts = <number trigger>, where:
- number: GPIO pin (0..31)
- trigger: trigger mode:
2 = trigger on falling edge
3 = trigger on both edges
Example of device using this is:
Example of a peripheral using the GPIO module as an IRQ controller:
funkyfpga@0 {
compatible = "funky-fpga";
...
interrupts = <4 3>;
interrupt-parent = <&gpio1>;
interrupts = <4 3>;
};
Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt 0 → 100644
浏览文件 @ 348324c5
* Abilis TB10x GPIO controller
Required Properties:
- compatible: Should be "abilis,tb10x-gpio"
- reg: Address and length of the register set for the device
- gpio-controller: Marks the device node as a gpio controller.
- #gpio-cells: Should be <2>. The first cell is the pin number and the
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted).
- abilis,ngpio: the number of GPIO pins this driver controls.
Optional Properties:
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
- interrupts: Defines the interrupt line connecting this GPIO controller to
its parent interrupt controller.
- interrupt-parent: Defines the parent interrupt controller.
GPIO ranges are specified as described in
Documentation/devicetree/bindings/gpio/gpio.txt
Example:
gpioa: gpio@FF140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF140000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioa_pins";
};
Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt 0 → 100644
浏览文件 @ 348324c5
Broadcom Kona Family GPIO
=========================
This GPIO driver is used in the following Broadcom SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
The Broadcom GPIO Controller IP can be configured prior to synthesis to
support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The
GPIO controller only supports edge, not level, triggering of interrupts.
Required properties
-------------------
- compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller. There is one GPIO
interrupt per GPIO bank. The number of interrupts listed depends on the
number of GPIO banks on the SoC. The interrupts must be ordered by bank,
starting with bank 0. There is always a 1:1 mapping between banks and
IRQs.
- #gpio-cells: Should be <2>. The first cell is the pin number, the second
cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
- #interrupt-cells: Should be <2>. The first cell is the GPIO number. The
second cell is used to specify flags. The following subset of flags is
supported:
- trigger type (bits[1:0]):
1 = low-to-high edge triggered.
2 = high-to-low edge triggered.
3 = low-to-high or high-to-low edge triggered
Valid values are 1, 2, 3
See also .../devicetree/bindings/interrupt-controller/interrupts.txt.
- gpio-controller: Marks the device node as a GPIO controller.
- interrupt-controller: Marks the device node as an interrupt controller.
Example:
gpio: gpio@35003000 {
compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
reg = <0x35003000 0x800>;
interrupts =
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
};
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt 0 → 100644
浏览文件 @ 348324c5
* PCF857x-compatible I/O expanders
The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
driven high by a pull-up current source or driven low to ground. This combines
the direction and output level into a single bit per line, which can't be read
back. We can't actually know at initialization time whether a line is configured
(a) as output and driving the signal low/high, or (b) as input and reporting a
low/high value, without knowing the last value written since the chip came out
of reset (if any). The only reliable solution for setting up line direction is
thus to do it explicitly.
Required Properties:
- compatible: should be one of the following.
- "maxim,max7328": For the Maxim MAX7378
- "maxim,max7329": For the Maxim MAX7329
- "nxp,pca8574": For the NXP PCA8574
- "nxp,pca8575": For the NXP PCA8575
- "nxp,pca9670": For the NXP PCA9670
- "nxp,pca9671": For the NXP PCA9671
- "nxp,pca9672": For the NXP PCA9672
- "nxp,pca9673": For the NXP PCA9673
- "nxp,pca9674": For the NXP PCA9674
- "nxp,pca9675": For the NXP PCA9675
- "nxp,pcf8574": For the NXP PCF8574
- "nxp,pcf8574a": For the NXP PCF8574A
- "nxp,pcf8575": For the NXP PCF8575
- "ti,tca9554": For the TI TCA9554
- reg: I2C slave address.
- gpio-controller: Marks the device node as a gpio controller.
- #gpio-cells: Should be 2. The first cell is the GPIO number and the second
cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
initialized the the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
an interrupt controller. When the expander interrupt line is connected all the
following properties must be set. For more information please see the
interrupt controller device tree bindings documentation available at
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
Please refer to gpio.txt in this directory for details of the common GPIO
bindings used by client devices.
Example: PCF8575 I/O expander node
pcf8575: gpio@20 {
compatible = "nxp,pcf8575";
reg = <0x20>;
interrupt-parent = <&irqpin2>;
interrupts = <3 0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
Documentation/devicetree/bindings/hwmon/lm90.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/hwrng/omap_rng.txt 0 → 100644
浏览文件 @ 348324c5
OMAP SoC HWRNG Module
Required properties:
- compatible : Should contain entries for this and backward compatible
RNG versions:
- "ti,omap2-rng" for OMAP2.
- "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX.
Note that these two versions are incompatible.
- ti,hwmods: Name of the hwmod associated with the RNG module
- reg : Offset and length of the register set for the module
- interrupts : the interrupt number for the RNG module.
Only used for "ti,omap4-rng".
Example:
/* AM335x */
rng: rng@48310000 {
compatible = "ti,omap4-rng";
ti,hwmods = "rng";
reg = <0x48310000 0x2000>;
interrupts = <111>;
};
Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/i2c/i2c-exynos5.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/i2c/i2c-omap.txt
浏览文件 @ 348324c5
I2C for OMAP platforms
Required properties :
- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
or "ti,omap4-i2c"
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
- #address-cells = <1>;
- #size-cells = <0>;
......
Documentation/devicetree/bindings/i2c/i2c-rcar.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/i2c/i2c-st.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/iio/light/cm36651.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
浏览文件 @ 348324c5
......@@ -8,9 +8,6 @@ Required properties:
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 1.
For the valid interrupt sources for your SoC, see the documentation in
sunxi/<soc>.txt
Example:
intc: interrupt-controller {
......
Documentation/devicetree/bindings/media/st-rc.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/memory.txt 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
Documentation/devicetree/bindings/mfd/as3722.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/misc/ti,dac7512.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/mmc/ti-omap.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/net/cpsw-phy-sel.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/phy/phy-bindings.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/phy/samsung-phy.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/power/twl-charger.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/regulator/da9210.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/rng/qcom,prng.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/sound/cs42l73.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/sound/tpa6130a2.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/spi/sh-hspi.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/timer/efm32,timer.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/usb/msm-hsusb.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/video/atmel,lcdc.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/devicetree/bindings/watchdog/dw_wdt.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/dmatest.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/filesystems/btrfs.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/filesystems/f2fs.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/filesystems/porting
浏览文件 @ 348324c5
此差异已折叠。
Documentation/filesystems/proc.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/filesystems/vfat.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/gcov.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/gpio/00-INDEX 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/gpio/board.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/gpio/consumer.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/gpio/driver.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/gpio/gpio.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/gpio/sysfs.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/hwmon/lm25066
浏览文件 @ 348324c5
此差异已折叠。
Documentation/hwmon/lm90
浏览文件 @ 348324c5
此差异已折叠。
Documentation/hwmon/ltc2978
浏览文件 @ 348324c5
此差异已折叠。
Documentation/i2c/busses/i2c-i801
浏览文件 @ 348324c5
此差异已折叠。
Documentation/kbuild/kconfig.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/kernel-parameters.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/lockstat.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mic/mic_overview.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mic/mpssd/.gitignore 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mic/mpssd/Makefile 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mic/mpssd/micctrl 0 → 100755
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mic/mpssd/mpss 0 → 100755
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mic/mpssd/mpssd.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mic/mpssd/mpssd.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mic/mpssd/sysfs.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/mutex-design.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/networking/can.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/networking/dccp.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/networking/e100.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/networking/l2tp.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/networking/rxrpc.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/networking/stmmac.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/networking/vortex.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/phy.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/pinctrl.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/power/opp.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/power/powercap/powercap.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/power/runtime_pm.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/pps/pps.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/ptp/testptp.c
浏览文件 @ 348324c5
此差异已折叠。
Documentation/pwm.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/s390/s390dbf.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/security/00-INDEX
浏览文件 @ 348324c5
此差异已折叠。
Documentation/security/IMA-templates.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/security/keys.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/serial/driver
浏览文件 @ 348324c5
此差异已折叠。
Documentation/sound/alsa/CMIPCI.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/sound/alsa/soc/DPCM.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/sysctl/kernel.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/sysctl/vm.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/sysrq.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/timers/00-INDEX
浏览文件 @ 348324c5
此差异已折叠。
Documentation/trace/ftrace.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/trace/tracepoints.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/virtual/kvm/00-INDEX 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/virtual/kvm/api.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/virtual/kvm/cpuid.txt
浏览文件 @ 348324c5
此差异已折叠。
Documentation/virtual/kvm/devices/vfio.txt 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/vm/00-INDEX
浏览文件 @ 348324c5
此差异已折叠。
Documentation/vm/split_page_table_lock 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
Documentation/vm/zswap.txt
浏览文件 @ 348324c5
此差异已折叠。
MAINTAINERS
浏览文件 @ 348324c5
此差异已折叠。
Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/include/asm/Kbuild
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/include/asm/machvec.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/include/asm/pal.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/include/asm/pgalloc.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/include/asm/rtc.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/include/asm/string.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/include/uapi/asm/errno.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/include/uapi/asm/pal.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/alpha_ksyms.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/irq_alpha.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/machvec_impl.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/perf_event.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/process.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/proto.h
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/rtc.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/setup.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/smp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/sys_jensen.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/sys_marvel.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/time.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/kernel/traps.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/lib/csum_partial_copy.c
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/lib/ev6-memset.S
浏览文件 @ 348324c5
此差异已折叠。
arch/alpha/lib/memset.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/boot/dts/abilis_tb100.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/boot/dts/abilis_tb101.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/boot/dts/abilis_tb10x.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/boot/dts/angel4.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/configs/fpga_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/configs/fpga_noramfs_defconfig 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/Kbuild
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/cache.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/irq.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/irqflags.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/mach_desc.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/mmu.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/mmu_context.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/perf_event.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/pgalloc.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/prom.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arc/include/asm/setup.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/smp.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/thread_info.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/tlbflush.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/asm/unaligned.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/include/uapi/asm/unistd.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/ctx_sw.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/ctx_sw_asm.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/devtree.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/entry.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/head.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/irq.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/kgdb.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/kprobes.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/perf_event.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/ptrace.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/reset.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/setup.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/smp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/stacktrace.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/time.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/kernel/traps.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/mm/cache_arc700.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/mm/fault.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/mm/init.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/mm/tlb.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/mm/tlbex.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arc/plat-tb10x/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/Kconfig.debug
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/compressed/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/compressed/head-shark.S 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/boot/compressed/head.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/compressed/ofw-shark.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/boot/dts/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am335x-base0033.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am335x-bone.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am335x-evm.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am335x-evmsk.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am335x-igep0033.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am335x-nano.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am33xx.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am3517-evm.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am3517.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/am4372.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/armada-370-db.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/armada-370-netgear-rn104.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/armada-370.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/armada-xp-matrix.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/armada-xp.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9g25.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9g35.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9n12.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9n12ek.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9x25.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9x35.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9x5.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9x5_macb0.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9x5_macb1.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/at91sam9x5_usart3.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/atlas6.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/bcm11351-brt.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/bcm11351.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/bcm28155-ap.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/bcm2835.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/dove-cm-a510.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/dove-cubox.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/dove-d2plug.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/dove-d3plug.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/dove-dove-db.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/dove.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/dra7-evm.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/dra7.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ecx-2000.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ecx-common.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/emev2-kzm9d-reference.dts 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/boot/dts/emev2-kzm9d.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/exynos4.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/exynos5250.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/exynos5420.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/exynos5440.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/highbank.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx23-evk.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx23-pinfunc.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx23.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx27.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx28-apf28.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx28-evk.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx28-m28cu3.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx28-m28evk.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx28-pinfunc.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx28-sps1.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx28-tx28.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx28.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx51-babbage.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx51.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx53-qsb.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx6q-pinfunc.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx6q-udoo.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx6qdl.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx6sl-evk.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/imx6sl.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/integrator.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/integratorap.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/integratorcp.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/keystone-clocks.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/keystone.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/kirkwood-db.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/kirkwood-openblocks_a7.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/kirkwood.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/mxs-pinfunc.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap-zoom-common.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap2.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap2420-h4.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap2420.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap2430.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-beagle.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-evm-37xx.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-evm-common.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-evm.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-gta04.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-igep.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-n9.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-n900.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-n950-n9.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-n950.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-overo.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3-zoom3.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap3430-sdp.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap34xx-hs.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap36xx-hs.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap36xx.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap4-sdp.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap4.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap5-uevm.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/omap5.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/prima2.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r7s72100-genmai.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r7s72100.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r8a73a4.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r8a7740.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r8a7778.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r8a7779.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r8a7790.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r8a7791-koelsch.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/r8a7791.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/rk3066a-bqcurie2.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/rk3066a.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/rk3188-clocks.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/rk3188-radxarock.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/rk3188.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/rk3xxx.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/s3c6400.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/s3c6410-mini6410.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/s3c6410-smdk6410.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/s3c6410.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/s3c64xx.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d31.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d31ek.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d33.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d33ek.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d34.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d34ek.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d35.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d35ek.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3_can.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3_emac.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3_gmac.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3_lcd.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3_mci2.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3_tcb1.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3_uart.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sama5d3xcm.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sh73a0.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/socfpga.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/socfpga_arria5.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/socfpga_arria5_socdk.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/socfpga_cyclone5.dts 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/boot/dts/socfpga_cyclone5.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/socfpga_cyclone5_socdk.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/socfpga_cyclone5_sockit.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-dbx5x0.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-href-stuib.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-href-tvk1281618.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-href.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-hrefprev60-stuib.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-hrefprev60-tvk.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-hrefprev60.dts 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/boot/dts/ste-hrefprev60.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-hrefv60plus-stuib.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-hrefv60plus-tvk.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-hrefv60plus.dts 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/boot/dts/ste-hrefv60plus.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-snowball.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/ste-stuib.dtsi 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/boot/dts/sun4i-a10.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sun5i-a10s.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sun5i-a13.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sun6i-a31.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sun7i-a20-cubietruck.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/sun7i-a20.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/tegra114.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/tegra124-venice2.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/tegra124.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/tegra30.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/testcases/tests-interrupts.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/twl4030.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/twl6030_omap4.dtsi 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/versatile-ab.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/versatile-pb.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/vf610-cosmic.dts 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/vf610-twr.dts
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/vf610.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/dts/zynq-7000.dtsi
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/boot/install.sh
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/bL_switcher.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/bL_switcher_dummy_if.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/edma.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/mcpm_entry.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/mcpm_head.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/mcpm_platsmp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/sharpsl_param.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/timer-sp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/common/via82c505.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/configs/bcm_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/bockw_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/ep93xx_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/h3600_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/keystone_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/koelsch_defconfig 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/lager_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/marzen_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/multi_v7_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/mxs_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/prima2_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/shark_defconfig 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/configs/sunxi_defconfig 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/tegra_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/u8500_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/vexpress_defconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/configs/vt8500_v6_v7_defconfig 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/crypto/.gitignore 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/crypto/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/crypto/aes_glue.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/crypto/aes_glue.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/crypto/aesbs-core.S_shipped 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/crypto/aesbs-glue.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/crypto/bsaes-armv7.pl 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/Kbuild
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/arch_timer.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/assembler.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/atomic.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/bL_switcher.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/bug.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/cacheflush.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/cmpxchg.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/cputype.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/dma-mapping.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/hardirq.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/hardware/iop3xx-gpio.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/include/asm/io.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/jump_label.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/kgdb.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/kvm_arm.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/kvm_asm.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/kvm_emulate.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/kvm_host.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/kvm_mmu.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/mach/arch.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/mach/pci.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/mcpm.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/memory.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/mmu.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/pgalloc.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/pgtable.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/processor.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/prom.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/sched_clock.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/include/asm/setup.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/smp.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/spinlock.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/syscall.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/thread_info.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/tlbflush.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/unified.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/xen/page-coherent.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/asm/xen/page.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/debug/efm32.S 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/debug/msm.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/debug/pl01x.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/debug/vf.S 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/uapi/asm/Kbuild
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/uapi/asm/hwcap.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/uapi/asm/kvm.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/include/uapi/asm/perf_regs.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/arch_timer.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/armksyms.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/devtree.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/entry-armv.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/entry-common.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/head-nommu.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/head.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/hw_breakpoint.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/kprobes.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/machine_kexec.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/module.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/perf_event.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/perf_event_cpu.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/perf_regs.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/process.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/psci_smp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/relocate_kernel.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/setup.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/signal.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/sigreturn_codes.S 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/sleep.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/smp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/smp_scu.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/smp_tlb.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/smp_twd.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/stacktrace.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/suspend.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/time.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kernel/traps.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/arm.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/coproc.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/coproc_a15.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/coproc_a7.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/emulate.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/guest.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/handle_exit.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/mmio.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/mmu.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/psci.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/kvm/reset.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/lib/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/lib/bitops.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/lib/delay-loop.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/lib/io-shark.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/lib/uaccess_with_memcpy.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/at91rm9200.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/at91sam9260.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/at91sam9261.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/at91sam9263.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/at91sam9g45.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/at91sam9n12.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/at91sam9rl.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/at91sam9x5.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/board-cam60.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/board-dt-sam9.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/board-sam9rlek.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/board.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/cpuidle.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-at91/generic.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/pm.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/pm.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/sama5d3.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/setup.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-at91/sysirq_mask.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-bcm/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-bcm/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-bcm/board_bcm281xx.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-bcm2835/bcm2835.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-clps711x/common.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/da830.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/da850.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/davinci.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/devices.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/dm355.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/dm365.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/dm644x.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/dm646x.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/include/mach/gpio.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-davinci/sram.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-davinci/time.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-dove/board-dt.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-ep93xx/clock.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-ep93xx/core.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-exynos/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-exynos/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-exynos/common.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-exynos/common.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-exynos/cpuidle.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-footbridge/common.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-footbridge/dc21285.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-footbridge/ebsa285.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-gemini/gpio.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-gemini/include/mach/gpio.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-gemini/time.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-highbank/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-highbank/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-highbank/core.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-highbank/highbank.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-highbank/hotplug.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-highbank/platsmp.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-highbank/pm.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/anatop.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/clk-imx51-imx53.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/clk-imx6q.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/clk-imx6sl.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/clk-pllv3.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/common.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/cpu.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/epit.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/gpc.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/hotplug.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/imx51-dt.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-imx53.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-imx6q.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-imx6sl.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-mx31_3ds.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-pca100.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-pcm037.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-pcm038.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-pcm043.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-vf610.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mach-vpr200.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mm-imx5.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mx31lilly-db.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/mxc.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/pm-imx6q.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/src.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/system.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-imx/time.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-integrator/cm.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-integrator/core.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-integrator/include/mach/cm.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-integrator/include/mach/irqs.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-integrator/leds.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-integrator/pci_v3.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-iop32x/em7210.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-iop32x/glantank.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-iop32x/gpio-iop32x.h 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-iop32x/include/mach/gpio.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-iop32x/iq31244.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-iop32x/iq80321.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-iop32x/n2100.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-iop33x/include/mach/gpio.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-iop33x/iq80331.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-iop33x/iq80332.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-ixp4xx/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-ixp4xx/common.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-ixp4xx/nslu2-setup.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-keystone/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-keystone/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-keystone/platsmp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-keystone/pm_domain.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-kirkwood/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-kirkwood/board-dt.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-kirkwood/common.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-kirkwood/common.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-kirkwood/pm.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-mmp/include/mach/gpio.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-mmp/ttc_dkb.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-msm/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-msm/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-msm/board-dt-8660.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-msm/board-dt-8960.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-msm/board-dt.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-msm/include/mach/irqs-8960.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-msm/include/mach/irqs-8x60.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-msm/timer.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-mvebu/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-mvebu/coherency_ll.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-mvebu/headsmp.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-mxs/mach-mxs.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-nomadik/cpu-8815.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-nspire/nspire.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/board-osk.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/common.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/fpga.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/gpio15xx.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/gpio16xx.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/gpio7xx.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/pm.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/time.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap1/timer32k.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/Kconfig
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/Makefile
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/board-3630sdp.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/board-cm-t35.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/board-flash.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/board-generic.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/board-h4.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/board-igep0020.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/board-ldp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/board-omap3evm.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/board-rm680.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/board-rx51.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/board-zoom-debugboard.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/board-zoom-display.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/board-zoom-peripherals.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/board-zoom.c 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/board-zoom.h 已删除 100644 → 0
浏览文件 @ 1e63bd9c
此差异已折叠。
arch/arm/mach-omap2/clkt2xxx_apll.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/clock.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/clock.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/clockdomain.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/clockdomains43xx_data.c 0 → 100644
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/cm2xxx.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/cm2xxx.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/cm33xx.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/cm33xx.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/cm3xxx.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/cm3xxx.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/cminst44xx.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/cminst44xx.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/common.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/control.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/control.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/devices.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/display.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/display.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/drm.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/dss-common.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/dss-common.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/fb.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/gpmc-onenand.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/gpmc-smsc911x.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/gpmc.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/id.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/io.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/irq.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/mcbsp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/mux.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/mux.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/omap-pm.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/omap-secure.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/omap-secure.h
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/omap-smc.S
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/omap-smp.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/omap4-common.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/omap_device.c
浏览文件 @ 348324c5
此差异已折叠。
arch/arm/mach-omap2/omap_device.h
浏览文件 @ 348324c5
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或