wifi: rtw88: add the update channel flow to support setting by parameters

In order to set channel info to hal during HW scan, we add the update
channel flow to support setting by parameters to meet the HW scan
requriement.
Signed-off-by: NChih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-4-pkshih@realtek.com

drivers/net/wireless/realtek/rtw88/main.c

@@ -675,67 +675,127 @@ void rtw_set_dtim_period(struct rtw_dev *rtwdev, int dtim_period)
 	rtw_write8(rtwdev, REG_DTIM_COUNTER_ROOT, dtim_period - 1);
 }
 
+void rtw_update_channel(struct rtw_dev *rtwdev, u8 center_channel,
+			u8 primary_channel, enum rtw_supported_band band,
+			enum rtw_bandwidth bandwidth)
+{
+	enum nl80211_band nl_band = rtw_hw_to_nl80211_band(band);
+	struct rtw_hal *hal = &rtwdev->hal;
+	u8 *cch_by_bw = hal->cch_by_bw;
+	u32 center_freq, primary_freq;
+	enum rtw_sar_bands sar_band;
+	u8 primary_channel_idx;
+
+	center_freq = ieee80211_channel_to_frequency(center_channel, nl_band);
+	primary_freq = ieee80211_channel_to_frequency(primary_channel, nl_band);
+
+	/* assign the center channel used while 20M bw is selected */
+	cch_by_bw[RTW_CHANNEL_WIDTH_20] = primary_channel;
+
+	/* assign the center channel used while current bw is selected */
+	cch_by_bw[bandwidth] = center_channel;
+
+	switch (bandwidth) {
+	case RTW_CHANNEL_WIDTH_20:
+		primary_channel_idx = RTW_SC_DONT_CARE;
+		break;
+	case RTW_CHANNEL_WIDTH_40:
+		if (primary_freq > center_freq)
+			primary_channel_idx = RTW_SC_20_UPPER;
+		else
+			primary_channel_idx = RTW_SC_20_LOWER;
+		break;
+	case RTW_CHANNEL_WIDTH_80:
+		if (primary_freq > center_freq) {
+			if (primary_freq - center_freq == 10)
+				primary_channel_idx = RTW_SC_20_UPPER;
+			else
+				primary_channel_idx = RTW_SC_20_UPMOST;
+
+			/* assign the center channel used
+			 * while 40M bw is selected
+			 */
+			cch_by_bw[RTW_CHANNEL_WIDTH_40] = center_channel + 4;
+		} else {
+			if (center_freq - primary_freq == 10)
+				primary_channel_idx = RTW_SC_20_LOWER;
+			else
+				primary_channel_idx = RTW_SC_20_LOWEST;
+
+			/* assign the center channel used
+			 * while 40M bw is selected
+			 */
+			cch_by_bw[RTW_CHANNEL_WIDTH_40] = center_channel - 4;
+		}
+		break;
+	default:
+		break;
+	}
+
+	switch (center_channel) {
+	case 1 ... 14:
+		sar_band = RTW_SAR_BAND_0;
+		break;
+	case 36 ... 64:
+		sar_band = RTW_SAR_BAND_1;
+		break;
+	case 100 ... 144:
+		sar_band = RTW_SAR_BAND_3;
+		break;
+	case 149 ... 177:
+		sar_band = RTW_SAR_BAND_4;
+		break;
+	default:
+		WARN(1, "unknown ch(%u) to SAR band\n", center_channel);
+		sar_band = RTW_SAR_BAND_0;
+		break;
+	}
+
+	hal->current_primary_channel_index = primary_channel_idx;
+	hal->current_band_width = bandwidth;
+	hal->primary_channel = primary_channel;
+	hal->current_channel = center_channel;
+	hal->current_band_type = band;
+	hal->sar_band = sar_band;
+}
+
 void rtw_get_channel_params(struct cfg80211_chan_def *chandef,
 			    struct rtw_channel_params *chan_params)
 {
 	struct ieee80211_channel *channel = chandef->chan;
 	enum nl80211_chan_width width = chandef->width;
-	u8 *cch_by_bw = chan_params->cch_by_bw;
 	u32 primary_freq, center_freq;
 	u8 center_chan;
 	u8 bandwidth = RTW_CHANNEL_WIDTH_20;
-	u8 primary_chan_idx = 0;
-	u8 i;
 
 	center_chan = channel->hw_value;
 	primary_freq = channel->center_freq;
 	center_freq = chandef->center_freq1;
 
-	/* assign the center channel used while 20M bw is selected */
-	cch_by_bw[RTW_CHANNEL_WIDTH_20] = channel->hw_value;
-
 	switch (width) {
 	case NL80211_CHAN_WIDTH_20_NOHT:
 	case NL80211_CHAN_WIDTH_20:
 		bandwidth = RTW_CHANNEL_WIDTH_20;
-		primary_chan_idx = RTW_SC_DONT_CARE;
 		break;
 	case NL80211_CHAN_WIDTH_40:
 		bandwidth = RTW_CHANNEL_WIDTH_40;
-		if (primary_freq > center_freq) {
-			primary_chan_idx = RTW_SC_20_UPPER;
+		if (primary_freq > center_freq)
 			center_chan -= 2;
-		} else {
-			primary_chan_idx = RTW_SC_20_LOWER;
+		else
 			center_chan += 2;
-		}
 		break;
 	case NL80211_CHAN_WIDTH_80:
 		bandwidth = RTW_CHANNEL_WIDTH_80;
 		if (primary_freq > center_freq) {
-			if (primary_freq - center_freq == 10) {
-				primary_chan_idx = RTW_SC_20_UPPER;
+			if (primary_freq - center_freq == 10)
 				center_chan -= 2;
-			} else {
-				primary_chan_idx = RTW_SC_20_UPMOST;
+			else
 				center_chan -= 6;
-			}
-			/* assign the center channel used
-			 * while 40M bw is selected
-			 */
-			cch_by_bw[RTW_CHANNEL_WIDTH_40] = center_chan + 4;
 		} else {
-			if (center_freq - primary_freq == 10) {
-				primary_chan_idx = RTW_SC_20_LOWER;
+			if (center_freq - primary_freq == 10)
 				center_chan += 2;
-			} else {
-				primary_chan_idx = RTW_SC_20_LOWEST;
+			else
 				center_chan += 6;
-			}
-			/* assign the center channel used
-			 * while 40M bw is selected
-			 */
-			cch_by_bw[RTW_CHANNEL_WIDTH_40] = center_chan - 4;
 		}
 		break;
 	default:
@@ -745,13 +805,7 @@ void rtw_get_channel_params(struct cfg80211_chan_def *chandef,
 
 	chan_params->center_chan = center_chan;
 	chan_params->bandwidth = bandwidth;
-	chan_params->primary_chan_idx = primary_chan_idx;
-
-	/* assign the center channel used while current bw is selected */
-	cch_by_bw[bandwidth] = center_chan;
-
-	for (i = bandwidth + 1; i <= RTW_MAX_CHANNEL_WIDTH; i++)
-		cch_by_bw[i] = 0;
+	chan_params->primary_chan = channel->hw_value;
 }
 
 void rtw_set_channel(struct rtw_dev *rtwdev)
@@ -760,45 +814,21 @@ void rtw_set_channel(struct rtw_dev *rtwdev)
 	struct ieee80211_hw *hw = rtwdev->hw;
 	struct rtw_hal *hal = &rtwdev->hal;
 	struct rtw_channel_params ch_param;
-	u8 center_chan, bandwidth, primary_chan_idx;
-	u8 i;
+	u8 center_chan, primary_chan, bandwidth, band;
 
 	rtw_get_channel_params(&hw->conf.chandef, &ch_param);
 	if (WARN(ch_param.center_chan == 0, "Invalid channel\n"))
 		return;
 
 	center_chan = ch_param.center_chan;
+	primary_chan = ch_param.primary_chan;
 	bandwidth = ch_param.bandwidth;
-	primary_chan_idx = ch_param.primary_chan_idx;
-
-	hal->current_band_width = bandwidth;
-	hal->current_channel = center_chan;
-	hal->current_primary_channel_index = primary_chan_idx;
-	hal->current_band_type = center_chan > 14 ? RTW_BAND_5G : RTW_BAND_2G;
-
-	switch (center_chan) {
-	case 1 ... 14:
-		hal->sar_band = RTW_SAR_BAND_0;
-		break;
-	case 36 ... 64:
-		hal->sar_band = RTW_SAR_BAND_1;
-		break;
-	case 100 ... 144:
-		hal->sar_band = RTW_SAR_BAND_3;
-		break;
-	case 149 ... 177:
-		hal->sar_band = RTW_SAR_BAND_4;
-		break;
-	default:
-		WARN(1, "unknown ch(%u) to SAR band\n", center_chan);
-		hal->sar_band = RTW_SAR_BAND_0;
-		break;
-	}
+	band = ch_param.center_chan > 14 ? RTW_BAND_5G : RTW_BAND_2G;
 
-	for (i = RTW_CHANNEL_WIDTH_20; i <= RTW_MAX_CHANNEL_WIDTH; i++)
-		hal->cch_by_bw[i] = ch_param.cch_by_bw[i];
+	rtw_update_channel(rtwdev, center_chan, primary_chan, band, bandwidth);
 
-	chip->ops->set_channel(rtwdev, center_chan, bandwidth, primary_chan_idx);
+	chip->ops->set_channel(rtwdev, center_chan, bandwidth,
+			       hal->current_primary_channel_index);
 
 	if (hal->current_band_type == RTW_BAND_5G) {
 		rtw_coex_switchband_notify(rtwdev, COEX_SWITCH_TO_5G);

drivers/net/wireless/realtek/rtw88/main.h

@@ -510,12 +510,8 @@ struct rtw_timer_list {
 
 struct rtw_channel_params {
 	u8 center_chan;
+	u8 primary_chan;
 	u8 bandwidth;
-	u8 primary_chan_idx;
-	/* center channel by different available bandwidth,
-	 * val of (bw > current bandwidth) is invalid
-	 */
-	u8 cch_by_bw[RTW_MAX_CHANNEL_WIDTH + 1];
 };
 
 struct rtw_hw_reg {
@@ -1898,6 +1894,7 @@ struct rtw_hal {
 	u8 current_primary_channel_index;
 	u8 current_band_width;
 	u8 current_band_type;
+	u8 primary_channel;
 
 	/* center channel for different available bandwidth,
 	 * val of (bw > current_band_width) is invalid
@@ -2134,6 +2131,20 @@ static inline int rtw_chip_dump_fw_crash(struct rtw_dev *rtwdev)
 	return 0;
 }
 
+static inline
+enum nl80211_band rtw_hw_to_nl80211_band(enum rtw_supported_band hw_band)
+{
+	switch (hw_band) {
+	default:
+	case RTW_BAND_2G:
+		return NL80211_BAND_2GHZ;
+	case RTW_BAND_5G:
+		return NL80211_BAND_5GHZ;
+	case RTW_BAND_60G:
+		return NL80211_BAND_60GHZ;
+	}
+}
+
 void rtw_set_rx_freq_band(struct rtw_rx_pkt_stat *pkt_stat, u8 channel);
 void rtw_set_dtim_period(struct rtw_dev *rtwdev, int dtim_period);
 void rtw_get_channel_params(struct cfg80211_chan_def *chandef,
@@ -2175,4 +2186,7 @@ int rtw_dump_fw(struct rtw_dev *rtwdev, const u32 ocp_src, u32 size,
 		u32 fwcd_item);
 int rtw_dump_reg(struct rtw_dev *rtwdev, const u32 addr, const u32 size);
 void rtw_set_txrx_1ss(struct rtw_dev *rtwdev, bool config_1ss);
+void rtw_update_channel(struct rtw_dev *rtwdev, u8 center_channel,
+			u8 primary_channel, enum rtw_supported_band band,
+			enum rtw_bandwidth bandwidth);
 #endif