未验证 提交 3373e900 编写于 作者: A Amelie Delaunay 提交者: Mark Brown

spi: stm32: fix fifo threshold level in case of short transfer

When transfer is shorter than half of the fifo, set the data packet size
up to transfer size instead of up to half of the fifo.
Check also that threshold is set at least to 1 data frame.
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-3-git-send-email-alain.volmat@st.comSigned-off-by: NMark Brown <broonie@kernel.org>
上级 135dd873
......@@ -467,20 +467,27 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
/**
* stm32h7_spi_prepare_fthlv - Determine FIFO threshold level
* @spi: pointer to the spi controller data structure
* @xfer_len: length of the message to be transferred
*/
static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi, u32 xfer_len)
{
u32 fthlv, half_fifo;
u32 fthlv, half_fifo, packet;
/* data packet should not exceed 1/2 of fifo space */
half_fifo = (spi->fifo_size / 2);
/* data_packet should not exceed transfer length */
if (half_fifo > xfer_len)
packet = xfer_len;
else
packet = half_fifo;
if (spi->cur_bpw <= 8)
fthlv = half_fifo;
fthlv = packet;
else if (spi->cur_bpw <= 16)
fthlv = half_fifo / 2;
fthlv = packet / 2;
else
fthlv = half_fifo / 4;
fthlv = packet / 4;
/* align packet size with data registers access */
if (spi->cur_bpw > 8)
......@@ -488,6 +495,9 @@ static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
else
fthlv -= (fthlv % 4); /* multiple of 4 */
if (!fthlv)
fthlv = 1;
return fthlv;
}
......@@ -1393,7 +1403,7 @@ static void stm32h7_spi_set_bpw(struct stm32_spi *spi)
cfg1_setb |= (bpw << STM32H7_SPI_CFG1_DSIZE_SHIFT) &
STM32H7_SPI_CFG1_DSIZE;
spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi);
spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi, spi->cur_xferlen);
fthlv = spi->cur_fthlv - 1;
cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV;
......@@ -1588,6 +1598,8 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
spin_lock_irqsave(&spi->lock, flags);
spi->cur_xferlen = transfer->len;
if (spi->cur_bpw != transfer->bits_per_word) {
spi->cur_bpw = transfer->bits_per_word;
spi->cfg->set_bpw(spi);
......@@ -1635,8 +1647,6 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
goto out;
}
spi->cur_xferlen = transfer->len;
dev_dbg(spi->dev, "transfer communication mode set to %d\n",
spi->cur_comm);
dev_dbg(spi->dev,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册