scsi: smartpqi: add pqi reset quiesce support

Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/smartpqi/smartpqi.h

@@ -688,6 +688,28 @@ struct pqi_config_table_heartbeat {
 	__le32	heartbeat_counter;
 };
 
+union pqi_reset_register {
+	struct {
+		u32	reset_type : 3;
+		u32	reserved : 2;
+		u32	reset_action : 3;
+		u32	hold_in_pd1 : 1;
+		u32	reserved2 : 23;
+	} bits;
+	u32	all_bits;
+};
+
+#define PQI_RESET_ACTION_RESET		0x1
+
+#define PQI_RESET_TYPE_NO_RESET		0x0
+#define PQI_RESET_TYPE_SOFT_RESET	0x1
+#define PQI_RESET_TYPE_FIRM_RESET	0x2
+#define PQI_RESET_TYPE_HARD_RESET	0x3
+
+#define PQI_RESET_ACTION_COMPLETED	0x2
+
+#define PQI_RESET_POLL_INTERVAL_MSECS	100
+
 #define PQI_MAX_OUTSTANDING_REQUESTS		((u32)~0)
 #define PQI_MAX_OUTSTANDING_REQUESTS_KDUMP	32
 #define PQI_MAX_TRANSFER_SIZE			(1024U * 1024U)
@@ -995,6 +1017,7 @@ struct pqi_ctrl_info {
 	u8		inbound_spanning_supported : 1;
 	u8		outbound_spanning_supported : 1;
 	u8		pqi_mode_enabled : 1;
+	u8		pqi_reset_quiesce_supported : 1;
 
 	struct list_head scsi_device_list;
 	spinlock_t	scsi_device_list_lock;

drivers/scsi/smartpqi/smartpqi_init.c

@@ -5889,28 +5889,62 @@ static void pqi_unregister_scsi(struct pqi_ctrl_info *ctrl_info)
 	scsi_host_put(shost);
 }
 
-#define PQI_RESET_ACTION_RESET		0x1
+static int pqi_wait_for_pqi_reset_completion(struct pqi_ctrl_info *ctrl_info)
+{
+	int rc = 0;
+	struct pqi_device_registers __iomem *pqi_registers;
+	unsigned long timeout;
+	unsigned int timeout_msecs;
+	union pqi_reset_register reset_reg;
+
+	pqi_registers = ctrl_info->pqi_registers;
+	timeout_msecs = readw(&pqi_registers->max_reset_timeout) * 100;
+	timeout = msecs_to_jiffies(timeout_msecs) + jiffies;
+
+	while (1) {
+		msleep(PQI_RESET_POLL_INTERVAL_MSECS);
+		reset_reg.all_bits = readl(&pqi_registers->device_reset);
+		if (reset_reg.bits.reset_action == PQI_RESET_ACTION_COMPLETED)
+			break;
+		pqi_check_ctrl_health(ctrl_info);
+		if (pqi_ctrl_offline(ctrl_info)) {
+			rc = -ENXIO;
+			break;
+		}
+		if (time_after(jiffies, timeout)) {
+			rc = -ETIMEDOUT;
+			break;
+		}
+	}
 
-#define PQI_RESET_TYPE_NO_RESET		0x0
-#define PQI_RESET_TYPE_SOFT_RESET	0x1
-#define PQI_RESET_TYPE_FIRM_RESET	0x2
-#define PQI_RESET_TYPE_HARD_RESET	0x3
+	return rc;
+}
 
 static int pqi_reset(struct pqi_ctrl_info *ctrl_info)
 {
 	int rc;
-	u32 reset_params;
+	union pqi_reset_register reset_reg;
 
-	reset_params = (PQI_RESET_ACTION_RESET << 5) |
-		PQI_RESET_TYPE_HARD_RESET;
+	if (ctrl_info->pqi_reset_quiesce_supported) {
+		rc = sis_pqi_reset_quiesce(ctrl_info);
+		if (rc) {
+			dev_err(&ctrl_info->pci_dev->dev,
+				"PQI reset failed during quiesce with error %d\n",
+				rc);
+			return rc;
+		}
+	}
 
-	writel(reset_params,
-		&ctrl_info->pqi_registers->device_reset);
+	reset_reg.all_bits = 0;
+	reset_reg.bits.reset_type = PQI_RESET_TYPE_HARD_RESET;
+	reset_reg.bits.reset_action = PQI_RESET_ACTION_RESET;
 
-	rc = pqi_wait_for_pqi_mode_ready(ctrl_info);
+	writel(reset_reg.all_bits, &ctrl_info->pqi_registers->device_reset);
+
+	rc = pqi_wait_for_pqi_reset_completion(ctrl_info);
 	if (rc)
 		dev_err(&ctrl_info->pci_dev->dev,
-			"PQI reset failed\n");
+			"PQI reset failed with error %d\n", rc);
 
 	return rc;
 }

drivers/scsi/smartpqi/smartpqi_sis.c

@@ -36,6 +36,7 @@
 #define SIS_ENABLE_INTX				0x80
 #define SIS_SOFT_RESET				0x100
 #define SIS_TRIGGER_SHUTDOWN			0x800000
+#define SIS_PQI_RESET_QUIESCE			0x1000000
 #define SIS_CMD_READY				0x200
 #define SIS_CMD_COMPLETE			0x1000
 #define SIS_CLEAR_CTRL_TO_HOST_DOORBELL		0x1000
@@ -47,6 +48,7 @@
 #define SIS_EXTENDED_PROPERTIES_SUPPORTED	0x800000
 #define SIS_SMARTARRAY_FEATURES_SUPPORTED	0x2
 #define SIS_PQI_MODE_SUPPORTED			0x4
+#define SIS_PQI_RESET_QUIESCE_SUPPORTED		0x8
 #define SIS_REQUIRED_EXTENDED_PROPERTIES	\
 	(SIS_SMARTARRAY_FEATURES_SUPPORTED | SIS_PQI_MODE_SUPPORTED)
 
@@ -258,6 +260,9 @@ int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info)
 		SIS_REQUIRED_EXTENDED_PROPERTIES)
 		return -ENODEV;
 
+	if (extended_properties & SIS_PQI_RESET_QUIESCE_SUPPORTED)
+		ctrl_info->pqi_reset_quiesce_supported = true;
+
 	return 0;
 }
 
@@ -336,9 +341,10 @@ int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info)
 
 #define SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS	30
 
-static void sis_wait_for_doorbell_bit_to_clear(
+static int sis_wait_for_doorbell_bit_to_clear(
 	struct pqi_ctrl_info *ctrl_info, u32 bit)
 {
+	int rc = 0;
 	u32 doorbell_register;
 	unsigned long timeout;
 
@@ -350,16 +356,21 @@ static void sis_wait_for_doorbell_bit_to_clear(
 		if ((doorbell_register & bit) == 0)
 			break;
 		if (readl(&ctrl_info->registers->sis_firmware_status) &
-			SIS_CTRL_KERNEL_PANIC)
+			SIS_CTRL_KERNEL_PANIC) {
+			rc = -ENODEV;
 			break;
+		}
 		if (time_after(jiffies, timeout)) {
 			dev_err(&ctrl_info->pci_dev->dev,
 				"doorbell register bit 0x%x not cleared\n",
 				bit);
+			rc = -ETIMEDOUT;
 			break;
 		}
 		usleep_range(1000, 2000);
 	}
+
+	return rc;
 }
 
 /* Enable MSI-X interrupts on the controller. */
@@ -434,6 +445,21 @@ void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info)
 		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
 }
 
+int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info)
+{
+	u32 doorbell_register;
+
+	doorbell_register =
+		readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+	doorbell_register |= SIS_PQI_RESET_QUIESCE;
+
+	writel(doorbell_register,
+		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+
+	return sis_wait_for_doorbell_bit_to_clear(ctrl_info,
+		SIS_PQI_RESET_QUIESCE);
+}
+
 #define SIS_MODE_READY_TIMEOUT_SECS	30
 
 int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info)

drivers/scsi/smartpqi/smartpqi_sis.h

@@ -32,6 +32,7 @@ void sis_enable_intx(struct pqi_ctrl_info *ctrl_info);
 void sis_disable_intx(struct pqi_ctrl_info *ctrl_info);
 void sis_soft_reset(struct pqi_ctrl_info *ctrl_info);
 void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info);
+int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info);
 int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info);
 void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value);
 u32 sis_read_driver_scratch(struct pqi_ctrl_info *ctrl_info);