Merge branch 'devel-timer' into devel-cleanup

arch/arm/mach-omap1/board-ams-delta.c

@@ -138,7 +138,7 @@ void ams_delta_latch2_write(u16 mask, u16 value)
 static void __init ams_delta_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static struct map_desc ams_delta_io_desc[] __initdata = {
@@ -391,7 +391,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
 	.init_machine	= ams_delta_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
 
 EXPORT_SYMBOL(ams_delta_latch1_write);

arch/arm/mach-omap1/board-fsample.c

@@ -329,7 +329,7 @@ static void __init omap_fsample_init(void)
 static void __init omap_fsample_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
@@ -394,5 +394,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
 	.init_machine	= omap_fsample_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-generic.c

@@ -31,7 +31,7 @@
 static void __init omap_generic_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 /* assume no Mini-AB port */
@@ -99,5 +99,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-h2.c

@@ -376,7 +376,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 static void __init h2_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static struct omap_usb_config h2_usb_config __initdata = {
@@ -466,5 +466,5 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
 	.init_machine	= h2_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-h3.c

@@ -439,7 +439,7 @@ static void __init h3_init(void)
 static void __init h3_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static void __init h3_map_io(void)
@@ -454,5 +454,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
 	.init_machine	= h3_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-htcherald.c

@@ -605,7 +605,7 @@ static void __init htcherald_init_irq(void)
 {
 	printk(KERN_INFO "htcherald_init_irq.\n");
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 MACHINE_START(HERALD, "HTC Herald")
@@ -616,5 +616,5 @@ MACHINE_START(HERALD, "HTC Herald")
 	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
 	.init_machine   = htcherald_init,
-	.timer          = &omap_timer,
+	.timer          = &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-innovator.c

@@ -292,7 +292,7 @@ static void __init innovator_init_smc91x(void)
 static void __init innovator_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -464,5 +464,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
 	.init_machine	= innovator_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-nokia770.c

@@ -51,7 +51,7 @@ static void __init omap_nokia770_init_irq(void)
 	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
 
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static const unsigned int nokia770_keymap[] = {
@@ -269,5 +269,5 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
 	.init_machine	= omap_nokia770_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-osk.c

@@ -282,7 +282,7 @@ static void __init osk_init_cf(void)
 static void __init osk_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static struct omap_usb_config osk_usb_config __initdata = {
@@ -588,5 +588,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
 	.init_machine	= osk_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmte.c

@@ -62,7 +62,7 @@
 static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static const unsigned int palmte_keymap[] = {
@@ -280,5 +280,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
 	.init_machine	= omap_palmte_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmtt.c

@@ -266,7 +266,7 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
 static void __init omap_palmtt_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static struct omap_usb_config palmtt_usb_config __initdata = {
@@ -326,5 +326,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
 	.init_machine	= omap_palmtt_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmz71.c

@@ -61,7 +61,7 @@ static void __init
 omap_palmz71_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static const unsigned int palmz71_keymap[] = {
@@ -346,5 +346,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmz71_init_irq,
 	.init_machine	= omap_palmz71_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-perseus2.c

@@ -297,7 +297,7 @@ static void __init omap_perseus2_init(void)
 static void __init omap_perseus2_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
@@ -355,5 +355,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
 	.init_machine	= omap_perseus2_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-sx1.c

@@ -411,7 +411,7 @@ static void __init omap_sx1_init(void)
 static void __init omap_sx1_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 /*----------------------------------------*/
 
@@ -426,5 +426,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_sx1_init_irq,
 	.init_machine	= omap_sx1_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-voiceblue.c

@@ -162,7 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = {
 static void __init voiceblue_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static void __init voiceblue_map_io(void)
@@ -306,5 +306,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
 	.init_machine	= voiceblue_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/irq.c

@@ -175,7 +175,7 @@ static struct irq_chip omap_irq_chip = {
 	.irq_set_wake	= omap_wake_irq,
 };
 
-void __init omap_init_irq(void)
+void __init omap1_init_irq(void)
 {
 	int i, j;
 

arch/arm/mach-omap1/time.c

@@ -297,7 +297,7 @@ static inline int omap_32k_timer_usable(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init omap_timer_init(void)
+static void __init omap1_timer_init(void)
 {
 	if (omap_32k_timer_usable()) {
 		preferred_sched_clock_init(1);
@@ -307,6 +307,6 @@ static void __init omap_timer_init(void)
 	}
 }
 
-struct sys_timer omap_timer = {
-	.init		= omap_timer_init,
+struct sys_timer omap1_timer = {
+	.init		= omap1_timer_init,
 };

arch/arm/mach-omap1/timer32k.c

@@ -183,10 +183,6 @@ static __init void omap_init_32k_timer(void)
 bool __init omap_32k_timer_init(void)
 {
 	omap_init_clocksource_32k();
-
-#ifdef CONFIG_OMAP_DM_TIMER
-	omap_dm_timer_init();
-#endif
 	omap_init_32k_timer();
 
 	return true;

arch/arm/mach-omap2/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o
 
 omap-2-3-common				= irq.o sdrc.o

arch/arm/mach-omap2/board-2430sdp.c

@@ -260,7 +260,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap_2430sdp_map_io,
 	.init_early	= omap_2430sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_2430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3430sdp.c

@@ -804,7 +804,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_3430sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_3430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3630sdp.c

@@ -219,7 +219,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-4430sdp.c

@@ -40,7 +40,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "control.h"
 #include "common-board-devices.h"
 
@@ -295,9 +294,6 @@ static void __init omap_4430sdp_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(1);
-#endif
 }
 
 static struct omap_musb_board_data musb_board_data = {
@@ -768,5 +764,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.init_early	= omap_4430sdp_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap_4430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap4_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517crane.c

@@ -104,7 +104,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_crane_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_crane_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517evm.c

@@ -494,7 +494,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_evm_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_evm_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-apollon.c

@@ -354,7 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.reserve	= omap_reserve,
 	.map_io		= omap_apollon_map_io,
 	.init_early	= omap_apollon_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_apollon_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t35.c

@@ -642,7 +642,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t35_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t35_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t3517.c

@@ -303,7 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.reserve        = omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t3517_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t3517_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-devkit8000.c

@@ -58,7 +58,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 
 #define OMAP_DM9000_GPIO_IRQ	25
@@ -440,10 +439,7 @@ static void __init devkit8000_init_early(void)
 
 static void __init devkit8000_init_irq(void)
 {
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
+	omap3_init_irq();
 }
 
 #define OMAP_DM9000_BASE	0x2c000000
@@ -709,5 +705,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.init_early	= devkit8000_init_early,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-generic.c

@@ -70,7 +70,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	.reserve	= omap_reserve,
 	.map_io		= omap_generic_map_io,
 	.init_early	= omap_generic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-h4.c

@@ -298,7 +298,7 @@ static void __init omap_h4_init_early(void)
 
 static void __init omap_h4_init_irq(void)
 {
-	omap_init_irq();
+	omap2_init_irq();
 }
 
 static struct at24_platform_data m24c01 = {
@@ -388,5 +388,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.init_early	= omap_h4_init_early,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-igep0020.c

@@ -706,9 +706,9 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 
 MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -716,7 +716,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ldp.c

@@ -348,7 +348,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_ldp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_ldp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-n8x0.c

@@ -699,9 +699,9 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
@@ -709,9 +709,9 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
@@ -719,7 +719,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

@@ -50,7 +50,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "pm.h"
 #include "common-board-devices.h"
 
@@ -483,10 +482,7 @@ static void __init omap3_beagle_init_early(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
+	omap3_init_irq();
 }
 
 static struct platform_device *omap3_beagle_devices[] __initdata = {
@@ -596,5 +592,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.init_early	= omap3_beagle_init_early,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3evm.c

@@ -739,7 +739,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_evm_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_evm_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3logic.c

@@ -35,7 +35,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "control.h"
 #include "common-board-devices.h"
 
@@ -213,16 +212,16 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3pandora.c

@@ -649,7 +649,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3pandora_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3pandora_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3stalker.c

@@ -52,7 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
@@ -491,10 +490,7 @@ static void __init omap3_stalker_init_early(void)
 
 static void __init omap3_stalker_init_irq(void)
 {
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
+	omap3_init_irq();
 }
 
 static struct platform_device *omap3_stalker_devices[] __initdata = {
@@ -557,5 +553,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	.init_early		= omap3_stalker_init_early,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
-	.timer			= &omap_timer,
+	.timer			= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -51,7 +51,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 
 #include <asm/setup.h>
@@ -371,10 +370,7 @@ static void __init omap3_touchbook_init_early(void)
 
 static void __init omap3_touchbook_init_irq(void)
 {
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
+	omap3_init_irq();
 }
 
 static struct platform_device *omap3_touchbook_devices[] __initdata = {
@@ -449,5 +445,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.init_early	= omap3_touchbook_init_early,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap4panda.c

@@ -41,7 +41,6 @@
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-generic-dpi.h>
-#include "timer-gp.h"
 
 #include "hsmmc.h"
 #include "control.h"
@@ -712,5 +711,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.init_early	= omap4_panda_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap4_panda_init,
-	.timer		= &omap_timer,
+	.timer		= &omap4_timer,
 MACHINE_END

arch/arm/mach-omap2/board-overo.c

@@ -615,7 +615,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= overo_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= overo_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rm680.c

@@ -163,7 +163,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.reserve	= omap_reserve,
 	.map_io		= rm680_map_io,
 	.init_early	= rm680_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= rm680_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rx51.c

@@ -160,7 +160,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= rx51_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ti8168evm.c

@@ -33,11 +33,6 @@ static void __init ti8168_init_early(void)
 	omap2_init_common_devices(NULL, NULL);
 }
 
-static void __init ti8168_evm_init_irq(void)
-{
-	omap_init_irq();
-}
-
 static void __init ti8168_evm_init(void)
 {
 	omap_serial_init();
@@ -56,7 +51,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
 	.boot_params	= 0x80000100,
 	.map_io		= ti8168_evm_map_io,
 	.init_early	= ti8168_init_early,
-	.init_irq	= ti8168_evm_init_irq,
-	.timer		= &omap_timer,
+	.init_irq	= ti816x_init_irq,
+	.timer		= &omap3_timer,
 	.init_machine	= ti8168_evm_init,
 MACHINE_END

arch/arm/mach-omap2/board-zoom.c

@@ -137,9 +137,9 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
@@ -147,7 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/io.c

@@ -333,23 +333,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
+/* See irq.c, omap4-common.c and entry-macro.S */
 void __iomem *omap_irq_base;
 
-/*
- * Initialize asm_irq_base for entry-macro.S
- */
-static inline void omap_irq_base_init(void)
-{
-	if (cpu_is_omap24xx())
-		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
-	else if (cpu_is_omap34xx())
-		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
-	else if (cpu_is_omap44xx())
-		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
-	else
-		pr_err("Could not initialize omap_irq_base\n");
-}
-
 void __init omap2_init_common_infrastructure(void)
 {
 	u8 postsetup_state;
@@ -422,7 +408,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
 		_omap2_init_reprogram_sdrc();
 	}
 
-	omap_irq_base_init();
 }
 
 /*

arch/arm/mach-omap2/irq.c

@@ -141,25 +141,20 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 				IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 }
 
-void __init omap_init_irq(void)
+static void __init omap_init_irq(u32 base, int nr_irqs)
 {
 	unsigned long nr_of_irqs = 0;
 	unsigned int nr_banks = 0;
 	int i, j;
 
+	omap_irq_base = ioremap(base, SZ_4K);
+	if (WARN_ON(!omap_irq_base))
+		return;
+
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		unsigned long base = 0;
 		struct omap_irq_bank *bank = irq_banks + i;
 
-		if (cpu_is_omap24xx())
-			base = OMAP24XX_IC_BASE;
-		else if (cpu_is_omap34xx())
-			base = OMAP34XX_IC_BASE;
-
-		BUG_ON(!base);
-
-		if (cpu_is_ti816x())
-			bank->nr_irqs = 128;
+		bank->nr_irqs = nr_irqs;
 
 		/* Static mapping, never released */
 		bank->base_reg = ioremap(base, SZ_4K);
@@ -181,6 +176,21 @@ void __init omap_init_irq(void)
 	       nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
 }
 
+void __init omap2_init_irq(void)
+{
+	omap_init_irq(OMAP24XX_IC_BASE, 96);
+}
+
+void __init omap3_init_irq(void)
+{
+	omap_init_irq(OMAP34XX_IC_BASE, 96);
+}
+
+void __init ti816x_init_irq(void)
+{
+	omap_init_irq(OMAP34XX_IC_BASE, 128);
+}
+
 #ifdef CONFIG_ARCH_OMAP3
 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 

arch/arm/mach-omap2/omap4-common.c

@@ -19,6 +19,8 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include <plat/irqs.h>
+
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
 
@@ -31,17 +33,15 @@ void __iomem *gic_dist_base_addr;
 
 void __init gic_init_irq(void)
 {
-	void __iomem *gic_cpu_base;
-
 	/* Static mapping, never released */
 	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
 	BUG_ON(!gic_dist_base_addr);
 
 	/* Static mapping, never released */
-	gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!gic_cpu_base);
+	omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+	BUG_ON(!omap_irq_base);
 
-	gic_init(0, 29, gic_dist_base_addr, gic_cpu_base);
+	gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
 }
 
 #ifdef CONFIG_CACHE_L2X0

arch/arm/mach-omap2/pm-debug.c

@@ -31,7 +31,6 @@
 #include <plat/board.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
-#include <plat/dmtimer.h>
 #include <plat/omap-pm.h>
 
 #include "cm2xxx_3xxx.h"
@@ -41,8 +40,6 @@
 int omap2_pm_debug;
 u32 enable_off_mode;
 u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
 
 #define DUMP_PRM_MOD_REG(mod, reg)    \
 	regs[reg_count].name = #mod "." #reg; \
@@ -162,23 +159,6 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }
 
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 #ifdef CONFIG_DEBUG_FS
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -576,9 +556,6 @@ static int option_set(void *data, u64 val)
 {
 	u32 *option = data;
 
-	if (option == &wakeup_timer_milliseconds && val >= 1000)
-		return -EINVAL;
-
 	*option = val;
 
 	if (option == &enable_off_mode) {
@@ -641,11 +618,6 @@ static int __init pm_dbg_init(void)
 				   &enable_off_mode, &pm_dbg_option_fops);
 	(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
 				   &sleep_while_idle, &pm_dbg_option_fops);
-	(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
-				   &wakeup_timer_seconds, &pm_dbg_option_fops);
-	(void) debugfs_create_file("wakeup_timer_milliseconds",
-			S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
-			&pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;

arch/arm/mach-omap2/pm.h

@@ -60,19 +60,13 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
-extern u32 wakeup_timer_seconds;
-extern u32 wakeup_timer_milliseconds;
-extern struct omap_dm_timer *gptimer_wakeup;
-
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
-extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
 extern int omap2_pm_debug;
 extern u32 enable_off_mode;
 extern u32 sleep_while_idle;
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
-#define omap2_pm_wakeup_on_timer(seconds, milliseconds)	do {} while (0);
 #define omap2_pm_debug				0
 #define enable_off_mode 0
 #define sleep_while_idle 0

arch/arm/mach-omap2/pm34xx.c

@@ -534,10 +534,6 @@ static int omap3_pm_suspend(void)
 	struct power_state *pwrst;
 	int state, ret = 0;
 
-	if (wakeup_timer_seconds || wakeup_timer_milliseconds)
-		omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
-					 wakeup_timer_milliseconds);
-
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);

arch/arm/mach-omap2/timer-gp.h

-/*
- * OMAP2/3 GPTIMER support.headers
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
-
-extern int __init omap2_gp_clockevent_set_gptimer(u8 id);
-
-#endif

arch/arm/mach-omap2/timer-gp.c → arch/arm/mach-omap2/timer.c

 /*
- * linux/arch/arm/mach-omap2/timer-gp.c
+ * linux/arch/arm/mach-omap2/timer.c
  *
  * OMAP2 GP timer support.
  *
@@ -43,24 +43,42 @@
 #include <plat/common.h>
 #include <plat/omap_hwmod.h>
 
-#include "timer-gp.h"
+/* Parent clocks, eventually these will come from the clock framework */
 
+#define OMAP2_MPU_SOURCE	"sys_ck"
+#define OMAP3_MPU_SOURCE	OMAP2_MPU_SOURCE
+#define OMAP4_MPU_SOURCE	"sys_clkin_ck"
+#define OMAP2_32K_SOURCE	"func_32k_ck"
+#define OMAP3_32K_SOURCE	"omap_32k_fck"
+#define OMAP4_32K_SOURCE	"sys_32k_ck"
+
+#ifdef CONFIG_OMAP_32K_TIMER
+#define OMAP2_CLKEV_SOURCE	OMAP2_32K_SOURCE
+#define OMAP3_CLKEV_SOURCE	OMAP3_32K_SOURCE
+#define OMAP4_CLKEV_SOURCE	OMAP4_32K_SOURCE
+#define OMAP3_SECURE_TIMER	12
+#else
+#define OMAP2_CLKEV_SOURCE	OMAP2_MPU_SOURCE
+#define OMAP3_CLKEV_SOURCE	OMAP3_MPU_SOURCE
+#define OMAP4_CLKEV_SOURCE	OMAP4_MPU_SOURCE
+#define OMAP3_SECURE_TIMER	1
+#endif
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
 
-static struct omap_dm_timer *gptimer;
+u32 sys_timer_reserved;
+
+/* Clockevent code */
+
+static struct omap_dm_timer clkev;
 static struct clock_event_device clockevent_gpt;
-static u8 __initdata gptimer_id = 1;
-static u8 __initdata inited;
-struct omap_dm_timer *gptimer_wakeup;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
-	struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id;
 	struct clock_event_device *evt = &clockevent_gpt;
 
-	omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW);
+	__omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
 
 	evt->event_handler(evt);
 	return IRQ_HANDLED;
@@ -75,7 +93,8 @@ static struct irqaction omap2_gp_timer_irq = {
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
-	omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles);
+	__omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST,
+						0xffffffff - cycles, 1);
 
 	return 0;
 }
@@ -85,13 +104,18 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 {
 	u32 period;
 
-	omap_dm_timer_stop(gptimer);
+	__omap_dm_timer_stop(clkev.io_base, 1, clkev.rate);
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
+		period = clkev.rate / HZ;
 		period -= 1;
-		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
+		/* Looks like we need to first set the load value separately */
+		__omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG,
+					0xffffffff - period, 1);
+		__omap_dm_timer_load_start(clkev.io_base,
+					OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+						0xffffffff - period, 1);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		break;
@@ -110,63 +134,85 @@ static struct clock_event_device clockevent_gpt = {
 	.set_mode	= omap2_gp_timer_set_mode,
 };
 
-/**
- * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
- * @id: GPTIMER to use (1..MAX_GPTIMER_ID)
- *
- * Define the GPTIMER that the system should use for the tick timer.
- * Meant to be called from board-*.c files in the event that GPTIMER1, the
- * default, is unsuitable.  Returns -EINVAL on error or 0 on success.
- */
-int __init omap2_gp_clockevent_set_gptimer(u8 id)
+static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
+						int gptimer_id,
+						const char *fck_source)
 {
-	if (id < 1 || id > MAX_GPTIMER_ID)
-		return -EINVAL;
-
-	BUG_ON(inited);
+	char name[10]; /* 10 = sizeof("gptXX_Xck0") */
+	struct omap_hwmod *oh;
+	size_t size;
+	int res = 0;
+
+	sprintf(name, "timer%d", gptimer_id);
+	omap_hwmod_setup_one(name);
+	oh = omap_hwmod_lookup(name);
+	if (!oh)
+		return -ENODEV;
+
+	timer->irq = oh->mpu_irqs[0].irq;
+	timer->phys_base = oh->slaves[0]->addr->pa_start;
+	size = oh->slaves[0]->addr->pa_end - timer->phys_base;
+
+	/* Static mapping, never released */
+	timer->io_base = ioremap(timer->phys_base, size);
+	if (!timer->io_base)
+		return -ENXIO;
+
+	/* After the dmtimer is using hwmod these clocks won't be needed */
+	sprintf(name, "gpt%d_fck", gptimer_id);
+	timer->fclk = clk_get(NULL, name);
+	if (IS_ERR(timer->fclk))
+		return -ENODEV;
+
+	sprintf(name, "gpt%d_ick", gptimer_id);
+	timer->iclk = clk_get(NULL, name);
+	if (IS_ERR(timer->iclk)) {
+		clk_put(timer->fclk);
+		return -ENODEV;
+	}
 
-	gptimer_id = id;
+	omap_hwmod_enable(oh);
 
-	return 0;
-}
+	sys_timer_reserved |= (1 << (gptimer_id - 1));
 
-static void __init omap2_gp_clockevent_init(void)
-{
-	u32 tick_rate;
-	int src;
-	char clockevent_hwmod_name[8]; /* 8 = sizeof("timerXX0") */
+	if (gptimer_id != 12) {
+		struct clk *src;
 
-	inited = 1;
+		src = clk_get(NULL, fck_source);
+		if (IS_ERR(src)) {
+			res = -EINVAL;
+		} else {
+			res = __omap_dm_timer_set_source(timer->fclk, src);
+			if (IS_ERR_VALUE(res))
+				pr_warning("%s: timer%i cannot set source\n",
+						__func__, gptimer_id);
+			clk_put(src);
+		}
+	}
+	__omap_dm_timer_reset(timer->io_base, 1, 1);
+	timer->posted = 1;
 
-	sprintf(clockevent_hwmod_name, "timer%d", gptimer_id);
-	omap_hwmod_setup_one(clockevent_hwmod_name);
+	timer->rate = clk_get_rate(timer->fclk);
 
-	gptimer = omap_dm_timer_request_specific(gptimer_id);
-	BUG_ON(gptimer == NULL);
-	gptimer_wakeup = gptimer;
+	timer->reserved = 1;
 
-#if defined(CONFIG_OMAP_32K_TIMER)
-	src = OMAP_TIMER_SRC_32_KHZ;
-#else
-	src = OMAP_TIMER_SRC_SYS_CLK;
-	WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
-	     "secure 32KiHz clock source\n");
-#endif
+	return res;
+}
 
-	if (gptimer_id != 12)
-		WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
-		     "timer-gp: omap_dm_timer_set_source() failed\n");
+static void __init omap2_gp_clockevent_init(int gptimer_id,
+						const char *fck_source)
+{
+	int res;
 
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
+	BUG_ON(res);
 
-	pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
-		gptimer_id, tick_rate);
+	omap2_gp_timer_irq.dev_id = (void *)&clkev;
+	setup_irq(clkev.irq, &omap2_gp_timer_irq);
 
-	omap2_gp_timer_irq.dev_id = (void *)gptimer;
-	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+	__omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
 
-	clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC,
+	clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
 				     clockevent_gpt.shift);
 	clockevent_gpt.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
@@ -176,31 +222,36 @@ static void __init omap2_gp_clockevent_init(void)
 
 	clockevent_gpt.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_gpt);
+
+	pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
+		gptimer_id, clkev.rate);
 }
 
 /* Clocksource code */
 
 #ifdef CONFIG_OMAP_32K_TIMER
-/* 
+/*
  * When 32k-timer is enabled, don't use GPTimer for clocksource
  * instead, just leave default clocksource which uses the 32k
  * sync counter.  See clocksource setup in plat-omap/counter_32k.c
  */
 
-static void __init omap2_gp_clocksource_init(void)
+static void __init omap2_gp_clocksource_init(int unused, const char *dummy)
 {
 	omap_init_clocksource_32k();
 }
 
 #else
+
+static struct omap_dm_timer clksrc;
+
 /*
  * clocksource
  */
 static DEFINE_CLOCK_DATA(cd);
-static struct omap_dm_timer *gpt_clocksource;
 static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
-	return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
+	return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1);
 }
 
 static struct clocksource clocksource_gpt = {
@@ -215,52 +266,77 @@ static void notrace dmtimer_update_sched_clock(void)
 {
 	u32 cyc;
 
-	cyc = omap_dm_timer_read_counter(gpt_clocksource);
+	cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
 
 	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
+unsigned long long notrace sched_clock(void)
+{
+	u32 cyc = 0;
+
+	if (clksrc.reserved)
+		cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
 /* Setup free-running counter for clocksource */
-static void __init omap2_gp_clocksource_init(void)
+static void __init omap2_gp_clocksource_init(int gptimer_id,
+						const char *fck_source)
 {
-	static struct omap_dm_timer *gpt;
-	u32 tick_rate;
-	static char err1[] __initdata = KERN_ERR
-		"%s: failed to request dm-timer\n";
-	static char err2[] __initdata = KERN_ERR
-		"%s: can't register clocksource!\n";
+	int res;
 
-	gpt = omap_dm_timer_request();
-	if (!gpt)
-		printk(err1, clocksource_gpt.name);
-	gpt_clocksource = gpt;
+	res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source);
+	BUG_ON(res);
 
-	omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK);
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
+	pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
+		gptimer_id, clksrc.rate);
 
-	omap_dm_timer_set_load_start(gpt, 1, 0);
+	__omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1);
+	init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
 
-	init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate);
+	if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
+		pr_err("Could not register clocksource %s\n",
+			clocksource_gpt.name);
+}
+#endif
 
-	if (clocksource_register_hz(&clocksource_gpt, tick_rate))
-		printk(err2, clocksource_gpt.name);
+#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src,			\
+				clksrc_nr, clksrc_src)			\
+static void __init omap##name##_timer_init(void)			\
+{									\
+	omap2_gp_clockevent_init((clkev_nr), clkev_src);		\
+	omap2_gp_clocksource_init((clksrc_nr), clksrc_src);		\
 }
+
+#define OMAP_SYS_TIMER(name)						\
+struct sys_timer omap##name##_timer = {					\
+	.init	= omap##name##_timer_init,				\
+};
+
+#ifdef CONFIG_ARCH_OMAP2
+OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE)
+OMAP_SYS_TIMER(2)
 #endif
 
-static void __init omap2_gp_timer_init(void)
+#ifdef CONFIG_ARCH_OMAP3
+OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE)
+OMAP_SYS_TIMER(3)
+OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE,
+			2, OMAP3_MPU_SOURCE)
+OMAP_SYS_TIMER(3_secure)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static void __init omap4_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	if (cpu_is_omap44xx()) {
-		twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
-		BUG_ON(!twd_base);
-	}
+	twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
+	BUG_ON(!twd_base);
 #endif
-	omap_dm_timer_init();
-
-	omap2_gp_clockevent_init();
-	omap2_gp_clocksource_init();
+	omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
+	omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE);
 }
-
-struct sys_timer omap_timer = {
-	.init	= omap2_gp_timer_init,
-};
+OMAP_SYS_TIMER(4)
+#endif

arch/arm/plat-omap/counter_32k.c

@@ -126,7 +126,7 @@ static inline unsigned long long notrace _omap_32k_sched_clock(void)
 	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
 }
 
-#ifndef CONFIG_OMAP_MPU_TIMER
+#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER)
 unsigned long long notrace sched_clock(void)
 {
 	return _omap_32k_sched_clock();

arch/arm/plat-omap/dmtimer.c

@@ -41,127 +41,6 @@
 #include <plat/dmtimer.h>
 #include <mach/irqs.h>
 
-/* register offsets */
-#define _OMAP_TIMER_ID_OFFSET		0x00
-#define _OMAP_TIMER_OCP_CFG_OFFSET	0x10
-#define _OMAP_TIMER_SYS_STAT_OFFSET	0x14
-#define _OMAP_TIMER_STAT_OFFSET		0x18
-#define _OMAP_TIMER_INT_EN_OFFSET	0x1c
-#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
-#define _OMAP_TIMER_CTRL_OFFSET		0x24
-#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
-#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
-#define		OMAP_TIMER_CTRL_PT		(1 << 12)
-#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
-#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
-#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
-#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
-#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
-#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
-#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
-#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
-#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* auto-reload enable */
-#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
-#define _OMAP_TIMER_COUNTER_OFFSET	0x28
-#define _OMAP_TIMER_LOAD_OFFSET		0x2c
-#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
-#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
-#define		WP_NONE			0	/* no write pending bit */
-#define		WP_TCLR			(1 << 0)
-#define		WP_TCRR			(1 << 1)
-#define		WP_TLDR			(1 << 2)
-#define		WP_TTGR			(1 << 3)
-#define		WP_TMAR			(1 << 4)
-#define		WP_TPIR			(1 << 5)
-#define		WP_TNIR			(1 << 6)
-#define		WP_TCVR			(1 << 7)
-#define		WP_TOCR			(1 << 8)
-#define		WP_TOWR			(1 << 9)
-#define _OMAP_TIMER_MATCH_OFFSET	0x38
-#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
-#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
-#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
-#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
-#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
-#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
-#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
-#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */
-
-/* register offsets with the write pending bit encoded */
-#define	WPSHIFT					16
-
-#define OMAP_TIMER_ID_REG			(_OMAP_TIMER_ID_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_OCP_CFG_REG			(_OMAP_TIMER_OCP_CFG_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_SYS_STAT_REG			(_OMAP_TIMER_SYS_STAT_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_STAT_REG			(_OMAP_TIMER_STAT_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_INT_EN_REG			(_OMAP_TIMER_INT_EN_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_WAKEUP_EN_REG		(_OMAP_TIMER_WAKEUP_EN_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_CTRL_REG			(_OMAP_TIMER_CTRL_OFFSET \
-							| (WP_TCLR << WPSHIFT))
-
-#define OMAP_TIMER_COUNTER_REG			(_OMAP_TIMER_COUNTER_OFFSET \
-							| (WP_TCRR << WPSHIFT))
-
-#define OMAP_TIMER_LOAD_REG			(_OMAP_TIMER_LOAD_OFFSET \
-							| (WP_TLDR << WPSHIFT))
-
-#define OMAP_TIMER_TRIGGER_REG			(_OMAP_TIMER_TRIGGER_OFFSET \
-							| (WP_TTGR << WPSHIFT))
-
-#define OMAP_TIMER_WRITE_PEND_REG		(_OMAP_TIMER_WRITE_PEND_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_MATCH_REG			(_OMAP_TIMER_MATCH_OFFSET \
-							| (WP_TMAR << WPSHIFT))
-
-#define OMAP_TIMER_CAPTURE_REG			(_OMAP_TIMER_CAPTURE_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_IF_CTRL_REG			(_OMAP_TIMER_IF_CTRL_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_CAPTURE2_REG			(_OMAP_TIMER_CAPTURE2_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_TICK_POS_REG			(_OMAP_TIMER_TICK_POS_OFFSET \
-							| (WP_TPIR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_NEG_REG			(_OMAP_TIMER_TICK_NEG_OFFSET \
-							| (WP_TNIR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_COUNT_REG		(_OMAP_TIMER_TICK_COUNT_OFFSET \
-							| (WP_TCVR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_INT_MASK_SET_REG				\
-		(_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
-		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
-
-struct omap_dm_timer {
-	unsigned long phys_base;
-	int irq;
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	struct clk *iclk, *fclk;
-#endif
-	void __iomem *io_base;
-	unsigned reserved:1;
-	unsigned enabled:1;
-	unsigned posted:1;
-};
-
 static int dm_timer_count;
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -291,11 +170,7 @@ static spinlock_t dm_timer_lock;
  */
 static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
 {
-	if (timer->posted)
-		while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
-				& (reg >> WPSHIFT))
-			cpu_relax();
-	return readl(timer->io_base + (reg & 0xff));
+	return __omap_dm_timer_read(timer->io_base, reg, timer->posted);
 }
 
 /*
@@ -307,11 +182,7 @@ static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
 static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
 						u32 value)
 {
-	if (timer->posted)
-		while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
-				& (reg >> WPSHIFT))
-			cpu_relax();
-	writel(value, timer->io_base + (reg & 0xff));
+	__omap_dm_timer_write(timer->io_base, reg, value, timer->posted);
 }
 
 static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
@@ -330,7 +201,7 @@ static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
 
 static void omap_dm_timer_reset(struct omap_dm_timer *timer)
 {
-	u32 l;
+	int autoidle = 0, wakeup = 0;
 
 	if (!cpu_class_is_omap2() || timer != &dm_timers[0]) {
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
@@ -338,28 +209,21 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
 	}
 	omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
 
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
-	l |= 0x02 << 3;  /* Set to smart-idle mode */
-	l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on idle */
-
 	/* Enable autoidle on OMAP2 / OMAP3 */
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		l |= 0x1 << 0;
+		autoidle = 1;
 
 	/*
 	 * Enable wake-up on OMAP2 CPUs.
 	 */
 	if (cpu_class_is_omap2())
-		l |= 1 << 2;
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+		wakeup = 1;
 
-	/* Match hardware reset default of posted mode */
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
-			OMAP_TIMER_CTRL_POSTED);
+	__omap_dm_timer_reset(timer->io_base, autoidle, wakeup);
 	timer->posted = 1;
 }
 
-static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+void omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
 	omap_dm_timer_enable(timer);
 	omap_dm_timer_reset(timer);
@@ -531,25 +395,13 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start);
 
 void omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
-	u32 l;
+	unsigned long rate = 0;
 
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	if (l & OMAP_TIMER_CTRL_ST) {
-		l &= ~0x1;
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 #ifdef CONFIG_ARCH_OMAP2PLUS
-		/* Readback to make sure write has completed */
-		omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-		 /*
-		  * Wait for functional clock period x 3.5 to make sure that
-		  * timer is stopped
-		  */
-		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
+	rate = clk_get_rate(timer->fclk);
 #endif
-	}
-	/* Ack possibly pending interrupt */
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
-			OMAP_TIMER_INT_OVERFLOW);
+
+	__omap_dm_timer_stop(timer->io_base, timer->posted, rate);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 
@@ -572,22 +424,11 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
 int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
-	int ret = -EINVAL;
-
 	if (source < 0 || source >= 3)
 		return -EINVAL;
 
-	clk_disable(timer->fclk);
-	ret = clk_set_parent(timer->fclk, dm_source_clocks[source]);
-	clk_enable(timer->fclk);
-
-	/*
-	 * When the functional clock disappears, too quick writes seem
-	 * to cause an abort. XXX Is this still necessary?
-	 */
-	__delay(300000);
-
-	return ret;
+	return __omap_dm_timer_set_source(timer->fclk,
+						dm_source_clocks[source]);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
@@ -625,8 +466,7 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
 	}
 	l |= OMAP_TIMER_CTRL_ST;
 
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+	__omap_dm_timer_load_start(timer->io_base, l, load, timer->posted);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
 
@@ -679,8 +519,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
 void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
 				  unsigned int value)
 {
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
+	__omap_dm_timer_int_enable(timer->io_base, value);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
 
@@ -696,17 +535,13 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
 
 void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 {
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
+	__omap_dm_timer_write_status(timer->io_base, value);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
 
 unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 {
-	unsigned int l;
-
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
-
-	return l;
+	return __omap_dm_timer_read_counter(timer->io_base, timer->posted);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
 
@@ -737,7 +572,7 @@ int omap_dm_timers_active(void)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 
-int __init omap_dm_timer_init(void)
+static int __init omap_dm_timer_init(void)
 {
 	struct omap_dm_timer *timer;
 	int i, map_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
@@ -790,8 +625,16 @@ int __init omap_dm_timer_init(void)
 			sprintf(clk_name, "gpt%d_fck", i + 1);
 			timer->fclk = clk_get(NULL, clk_name);
 		}
+
+		/* One or two timers may be set up early for sys_timer */
+		if (sys_timer_reserved & (1  << i)) {
+			timer->reserved = 1;
+			timer->posted = 1;
+		}
 #endif
 	}
 
 	return 0;
 }
+
+arch_initcall(omap_dm_timer_init);

arch/arm/plat-omap/include/plat/common.h

@@ -34,7 +34,11 @@
 struct sys_timer;
 
 extern void omap_map_common_io(void);
-extern struct sys_timer omap_timer;
+extern struct sys_timer omap1_timer;
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
 extern bool omap_32k_timer_init(void);
 extern int __init omap_init_clocksource_32k(void);
 extern unsigned long long notrace omap_32k_sched_clock(void);

arch/arm/plat-omap/include/plat/dmtimer.h

@@ -32,6 +32,9 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/clk.h>
+#include <linux/delay.h>
+
 #ifndef __ASM_ARCH_DMTIMER_H
 #define __ASM_ARCH_DMTIMER_H
 
@@ -56,12 +59,8 @@
  */
 #define OMAP_TIMER_IP_VERSION_1                        0x1
 struct omap_dm_timer;
-extern struct omap_dm_timer *gptimer_wakeup;
-extern struct sys_timer omap_timer;
 struct clk;
 
-int omap_dm_timer_init(void);
-
 struct omap_dm_timer *omap_dm_timer_request(void);
 struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
 void omap_dm_timer_free(struct omap_dm_timer *timer);
@@ -93,5 +92,248 @@ void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value
 
 int omap_dm_timers_active(void);
 
+/*
+ * Do not use the defines below, they are not needed. They should be only
+ * used by dmtimer.c and sys_timer related code.
+ */
+
+/* register offsets */
+#define _OMAP_TIMER_ID_OFFSET		0x00
+#define _OMAP_TIMER_OCP_CFG_OFFSET	0x10
+#define _OMAP_TIMER_SYS_STAT_OFFSET	0x14
+#define _OMAP_TIMER_STAT_OFFSET		0x18
+#define _OMAP_TIMER_INT_EN_OFFSET	0x1c
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
+#define _OMAP_TIMER_CTRL_OFFSET		0x24
+#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
+#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
+#define		OMAP_TIMER_CTRL_PT		(1 << 12)
+#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
+#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
+#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
+#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
+#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
+#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
+#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
+#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
+#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* auto-reload enable */
+#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET	0x28
+#define _OMAP_TIMER_LOAD_OFFSET		0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
+#define		WP_NONE			0	/* no write pending bit */
+#define		WP_TCLR			(1 << 0)
+#define		WP_TCRR			(1 << 1)
+#define		WP_TLDR			(1 << 2)
+#define		WP_TTGR			(1 << 3)
+#define		WP_TMAR			(1 << 4)
+#define		WP_TPIR			(1 << 5)
+#define		WP_TNIR			(1 << 6)
+#define		WP_TCVR			(1 << 7)
+#define		WP_TOCR			(1 << 8)
+#define		WP_TOWR			(1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET	0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */
+
+/* register offsets with the write pending bit encoded */
+#define	WPSHIFT					16
+
+#define OMAP_TIMER_ID_REG			(_OMAP_TIMER_ID_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_OCP_CFG_REG			(_OMAP_TIMER_OCP_CFG_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_SYS_STAT_REG			(_OMAP_TIMER_SYS_STAT_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_STAT_REG			(_OMAP_TIMER_STAT_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_INT_EN_REG			(_OMAP_TIMER_INT_EN_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_WAKEUP_EN_REG		(_OMAP_TIMER_WAKEUP_EN_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG			(_OMAP_TIMER_CTRL_OFFSET \
+							| (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG			(_OMAP_TIMER_COUNTER_OFFSET \
+							| (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG			(_OMAP_TIMER_LOAD_OFFSET \
+							| (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG			(_OMAP_TIMER_TRIGGER_OFFSET \
+							| (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG		(_OMAP_TIMER_WRITE_PEND_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG			(_OMAP_TIMER_MATCH_OFFSET \
+							| (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG			(_OMAP_TIMER_CAPTURE_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG			(_OMAP_TIMER_IF_CTRL_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG			(_OMAP_TIMER_CAPTURE2_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG			(_OMAP_TIMER_TICK_POS_OFFSET \
+							| (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG			(_OMAP_TIMER_TICK_NEG_OFFSET \
+							| (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG		(_OMAP_TIMER_TICK_COUNT_OFFSET \
+							| (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG				\
+		(_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
+		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
+
+struct omap_dm_timer {
+	unsigned long phys_base;
+	int irq;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+	struct clk *iclk, *fclk;
+#endif
+	void __iomem *io_base;
+	unsigned long rate;
+	unsigned reserved:1;
+	unsigned enabled:1;
+	unsigned posted:1;
+};
+
+extern u32 sys_timer_reserved;
+void omap_dm_timer_prepare(struct omap_dm_timer *timer);
+
+static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
+						int posted)
+{
+	if (posted)
+		while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+				& (reg >> WPSHIFT))
+			cpu_relax();
+
+	return __raw_readl(base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val,
+						int posted)
+{
+	if (posted)
+		while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+				& (reg >> WPSHIFT))
+			cpu_relax();
+
+	__raw_writel(val, base + (reg & 0xff));
+}
+
+/* Assumes the source clock has been set by caller */
+static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle,
+						int wakeup)
+{
+	u32 l;
+
+	l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0);
+	l |= 0x02 << 3;  /* Set to smart-idle mode */
+	l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on idle */
+
+	if (autoidle)
+		l |= 0x1 << 0;
+
+	if (wakeup)
+		l |= 1 << 2;
+
+	__omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0);
+
+	/* Match hardware reset default of posted mode */
+	__omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG,
+					OMAP_TIMER_CTRL_POSTED, 0);
+}
+
+static inline int __omap_dm_timer_set_source(struct clk *timer_fck,
+						struct clk *parent)
+{
+	int ret;
+
+	clk_disable(timer_fck);
+	ret = clk_set_parent(timer_fck, parent);
+	clk_enable(timer_fck);
+
+	/*
+	 * When the functional clock disappears, too quick writes seem
+	 * to cause an abort. XXX Is this still necessary?
+	 */
+	__delay(300000);
+
+	return ret;
+}
+
+static inline void __omap_dm_timer_stop(void __iomem *base, int posted,
+						unsigned long rate)
+{
+	u32 l;
+
+	l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+	if (l & OMAP_TIMER_CTRL_ST) {
+		l &= ~0x1;
+		__omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+		/* Readback to make sure write has completed */
+		__omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+		/*
+		 * Wait for functional clock period x 3.5 to make sure that
+		 * timer is stopped
+		 */
+		udelay(3500000 / rate + 1);
+#endif
+	}
+
+	/* Ack possibly pending interrupt */
+	__omap_dm_timer_write(base, OMAP_TIMER_STAT_REG,
+					OMAP_TIMER_INT_OVERFLOW, 0);
+}
+
+static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl,
+						unsigned int load, int posted)
+{
+	__omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted);
+	__omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted);
+}
+
+static inline void __omap_dm_timer_int_enable(void __iomem *base,
+						unsigned int value)
+{
+	__omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0);
+	__omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base,
+							int posted)
+{
+	return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(void __iomem *base,
+						unsigned int value)
+{
+	__omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0);
+}
 
 #endif /* __ASM_ARCH_DMTIMER_H */

arch/arm/plat-omap/include/plat/irqs.h

@@ -428,7 +428,11 @@
 #define INTCPS_NR_IRQS		96
 
 #ifndef __ASSEMBLY__
-extern void omap_init_irq(void);
+extern void __iomem *omap_irq_base;
+void omap1_init_irq(void);
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti816x_init_irq(void);
 extern int omap_irq_pending(void);
 void omap_intc_save_context(void);
 void omap_intc_restore_context(void);