iwlwifi: mvm: advertise VHT capabilities

Update the NVM parsing functions to add VHT capabilities;
they are only added for 5 GHz, of course. This assumes
that all devices with NVM reading (rather than EEPROM)
that support 5 GHz have VHT, which is true right now.
Signed-off-by: NEytan Lifshitz <eytan.lifshitz@intel.com>
Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

drivers/net/wireless/iwlwifi/iwl-nvm-parse.c

@@ -149,6 +149,8 @@ static struct ieee80211_rate iwl_cfg80211_rates[] = {
  * @NVM_CHANNEL_DFS: dynamic freq selection candidate
  * @NVM_CHANNEL_WIDE: 20 MHz channel okay (?)
  * @NVM_CHANNEL_40MHZ: 40 MHz channel okay (?)
+ * @NVM_CHANNEL_80MHZ: 80 MHz channel okay (?)
+ * @NVM_CHANNEL_160MHZ: 160 MHz channel okay (?)
  */
 enum iwl_nvm_channel_flags {
 	NVM_CHANNEL_VALID = BIT(0),
@@ -158,6 +160,8 @@ enum iwl_nvm_channel_flags {
 	NVM_CHANNEL_DFS = BIT(7),
 	NVM_CHANNEL_WIDE = BIT(8),
 	NVM_CHANNEL_40MHZ = BIT(9),
+	NVM_CHANNEL_80MHZ = BIT(10),
+	NVM_CHANNEL_160MHZ = BIT(11),
 };
 
 #define CHECK_AND_PRINT_I(x)	\
@@ -210,6 +214,10 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 			else
 				channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
 		}
+		if (!(ch_flags & NVM_CHANNEL_80MHZ))
+			channel->flags |= IEEE80211_CHAN_NO_80MHZ;
+		if (!(ch_flags & NVM_CHANNEL_160MHZ))
+			channel->flags |= IEEE80211_CHAN_NO_160MHZ;
 
 		if (!(ch_flags & NVM_CHANNEL_IBSS))
 			channel->flags |= IEEE80211_CHAN_NO_IBSS;
@@ -245,6 +253,43 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 	return n_channels;
 }
 
+static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
+				  struct iwl_nvm_data *data,
+				  struct ieee80211_sta_vht_cap *vht_cap)
+{
+	/* For now, assume new devices with NVM are VHT capable */
+
+	vht_cap->vht_supported = true;
+
+	vht_cap->cap = IEEE80211_VHT_CAP_SHORT_GI_80 |
+		       IEEE80211_VHT_CAP_RXSTBC_1 |
+		       IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+		       7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
+
+	if (iwlwifi_mod_params.amsdu_size_8K)
+		vht_cap->cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991;
+
+	vht_cap->vht_mcs.rx_mcs_map =
+		cpu_to_le16(IEEE80211_VHT_MCS_SUPPORT_0_9 << 0 |
+			    IEEE80211_VHT_MCS_SUPPORT_0_9 << 2 |
+			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 4 |
+			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 6 |
+			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 8 |
+			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 10 |
+			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
+			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 14);
+
+	if (data->valid_rx_ant == 1 || cfg->rx_with_siso_diversity) {
+		vht_cap->cap |= IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
+				IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
+		/* this works because NOT_SUPPORTED == 3 */
+		vht_cap->vht_mcs.rx_mcs_map |=
+			cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << 2);
+	}
+
+	vht_cap->vht_mcs.tx_mcs_map = vht_cap->vht_mcs.rx_mcs_map;
+}
+
 static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
 			    struct iwl_nvm_data *data, const __le16 *nvm_sw)
 {
@@ -268,6 +313,7 @@ static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
 	n_used += iwl_init_sband_channels(data, sband, n_channels,
 					  IEEE80211_BAND_5GHZ);
 	iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_5GHZ);
+	iwl_init_vht_hw_capab(cfg, data, &sband->vht_cap);
 
 	if (n_channels != n_used)
 		IWL_ERR_DEV(dev, "NVM: used only %d of %d channels\n",