ARM: dts: bcm283x: Define memory at board level

Now with the varity of several RPi boards, the memory should be defined
at board level. This step gives us the chance to fix the memory size
of the RPi 1 B+, Zero (incl. W) and Compute Module 1.
Signed-off-by: NStefan Wahren <wahrenst@gmx.net>
Acked-by: NEric Anholt <eric@anholt.net>

arch/arm/boot/dts/bcm2835-rpi-a-plus.dts

@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model A+";
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/bcm2835-rpi-a.dts

@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,model-a", "brcm,bcm2835";
 	model = "Raspberry Pi Model A";
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm2835-rpi-b-plus.dts

@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model B+";
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts

@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
 	model = "Raspberry Pi Model B rev2";
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
 	model = "Raspberry Pi Model B";
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi

@@ -10,6 +10,11 @@
 		};
 	};
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

@@ -12,6 +12,11 @@
 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
 	model = "Raspberry Pi Zero W";
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	chosen {
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";

arch/arm/boot/dts/bcm2835-rpi-zero.dts

@@ -12,6 +12,11 @@
 	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
 	model = "Raspberry Pi Zero";
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/bcm2835-rpi.dtsi

 #include <dt-bindings/power/raspberrypi-power.h>
 
 / {
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 

arch/arm/boot/dts/bcm2836-rpi-2-b.dts

@@ -10,6 +10,7 @@
 	model = "Raspberry Pi 2 Model B";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
 

arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts

@@ -14,6 +14,7 @@
 	};
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
 

arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts

@@ -15,6 +15,7 @@
 	};
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
 

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -15,6 +15,7 @@
 	};
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
 

arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi

@@ -5,6 +5,7 @@
 
 / {
 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};