scsi: pm80xx: Fix chip initialization failure

stable inclusion
from stable-5.10.30
commit d8e7fa8509d7ff335acfe2b1764dae7dd272ec77
bugzilla: 51791

--------------------------------

commit 65df7d19 upstream.

Inbound and outbound queues were not properly configured and that lead to
MPI configuration failure.

Fixes: 05c6c029 ("scsi: pm80xx: Increase number of supported queues")
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.comReported-and-tested-by: NAsh Izat <ash@ai0.uk>
Signed-off-by: NViswas G <Viswas.G@microchip.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

drivers/scsi/pm8001/pm8001_hwi.c

@@ -223,7 +223,7 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
 		PM8001_EVENT_LOG_SIZE;
 	pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option		= 0x01;
 	pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt		= 0x01;
-	for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
+	for (i = 0; i < pm8001_ha->max_q_num; i++) {
 		pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt	=
 			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
 		pm8001_ha->inbnd_q_tbl[i].upper_base_addr	=
@@ -249,7 +249,7 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
 		pm8001_ha->inbnd_q_tbl[i].producer_idx		= 0;
 		pm8001_ha->inbnd_q_tbl[i].consumer_index	= 0;
 	}
-	for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
+	for (i = 0; i < pm8001_ha->max_q_num; i++) {
 		pm8001_ha->outbnd_q_tbl[i].element_size_cnt	=
 			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
 		pm8001_ha->outbnd_q_tbl[i].upper_base_addr	=
@@ -671,9 +671,9 @@ static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
 	read_outbnd_queue_table(pm8001_ha);
 	/* update main config table ,inbound table and outbound table */
 	update_main_config_table(pm8001_ha);
-	for (i = 0; i < PM8001_MAX_INB_NUM; i++)
+	for (i = 0; i < pm8001_ha->max_q_num; i++)
 		update_inbnd_queue_table(pm8001_ha, i);
-	for (i = 0; i < PM8001_MAX_OUTB_NUM; i++)
+	for (i = 0; i < pm8001_ha->max_q_num; i++)
 		update_outbnd_queue_table(pm8001_ha, i);
 	/* 8081 controller donot require these operations */
 	if (deviceid != 0x8081 && deviceid != 0x0042) {