ARM: Merge for-2635/fb-updates1

Merge branch 'for-2635/fb-updates1' into for-linus/samsung2

arch/arm/Kconfig

@@ -647,7 +647,7 @@ config ARCH_SA1100
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
@@ -656,6 +656,10 @@ config ARCH_S3C2410
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
 	  the Samsung SMDK2410 development board (and derivatives).
 
+	  Note, the S3C2416 and the S3C2450 are so close that they even share
+	  the same SoC ID code. This means that there is no seperate machine
+	  directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select PLAT_SAMSUNG
@@ -892,6 +896,7 @@ if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2416/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif

arch/arm/Makefile

@@ -162,7 +162,7 @@ machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440

arch/arm/mach-s3c2410/include/mach/dma.h

@@ -54,7 +54,7 @@ enum dma_ch {
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
+#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416)
 #define S3C_DMA_CHANNELS		(4)
 #else
 #define S3C_DMA_CHANNELS		(6)

arch/arm/mach-s3c2410/include/mach/irqs.h

@@ -115,6 +115,26 @@
 #define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
 #define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
 
+
+#define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
+#define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
+#define IRQ_S3C2416_UART3	S3C2410_IRQ(18)
+#define IRQ_S3C2416_SDI1	S3C2410_IRQ(20)
+#define IRQ_S3C2416_SDI0	S3C2410_IRQ(21)
+
+#define IRQ_S3C2416_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2416_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2416_LCD4	S3C2410_IRQSUB(17)
+#define IRQ_S3C2416_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2416_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2416_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2416_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2416_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2416_DMA5	S3C2410_IRQSUB(23)
+#define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
+
+
 /* extra irqs for s3c2440 */
 
 #define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
@@ -130,7 +150,10 @@
 #define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
 #define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
 
+#define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
+
 #define IRQ_HSMMC0		IRQ_S3C2443_HSMMC
+#define IRQ_HSMMC1		IRQ_S3C2416_HSMMC0
 
 #define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
@@ -152,7 +175,7 @@
 #define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
-#ifdef CONFIG_CPU_S3C2443
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
 #define NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
@@ -164,6 +187,9 @@
 #define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
 
+#define IRQ_LCD_VSYNC		IRQ_S3C2443_LCD3
+#define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
+
 #ifdef CONFIG_CPU_S3C2440
 #define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
 #else

arch/arm/mach-s3c2410/include/mach/map.h

@@ -63,9 +63,11 @@
 #define S3C2440_PA_AC97	   (0x5B000000)
 #define S3C2440_SZ_AC97	   SZ_1M
 
-/* S3C2443 High-speed SD/MMC */
+/* S3C2443/S3C2416 High-speed SD/MMC */
 #define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2443_SZ_HSMMC   (256)
+#define S3C2416_PA_HSMMC0  (0x4AC00000)
+
+#define	S3C2443_PA_FB	(0x4C800000)
 
 /* S3C2412 memory and IO controls */
 #define S3C2412_PA_SSMC	(0x4F000000)
@@ -106,10 +108,12 @@
 #define S3C24XX_PA_SDI      S3C2410_PA_SDI
 #define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
+#define S3C_PA_FB	    S3C2443_PA_FB
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
+#define S3C_PA_HSMMC1	    S3C2416_PA_HSMMC0
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s3c2410/include/mach/regs-clock.h

@@ -161,4 +161,6 @@
 
 #endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
 
+#define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
+
 #endif /* __ASM_ARM_REGS_CLOCK */

arch/arm/mach-s3c2410/include/mach/regs-dsc.h

@@ -19,6 +19,42 @@
 #define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
 #endif
 
+#if defined(CONFIG_CPU_S3C2416)
+#define S3C2416_DSC0	   S3C2410_GPIOREG(0xc0)
+#define S3C2416_DSC1	   S3C2410_GPIOREG(0xc4)
+#define S3C2416_DSC2	   S3C2410_GPIOREG(0xc8)
+#define S3C2416_DSC3	   S3C2410_GPIOREG(0x110)
+
+#define S3C2416_SELECT_DSC0	(0 << 30)
+#define S3C2416_SELECT_DSC1	(1 << 30)
+#define S3C2416_SELECT_DSC2	(2 << 30)
+#define S3C2416_SELECT_DSC3	(3 << 30)
+
+#define S3C2416_DSC_GETSHIFT(x)	(x & 30)
+
+#define S3C2416_DSC0_CF		(S3C2416_SELECT_DSC0 | 28)
+#define	S3C2416_DSC0_CF_5mA	(0 << 28)
+#define	S3C2416_DSC0_CF_10mA	(1 << 28)
+#define	S3C2416_DSC0_CF_15mA	(2 << 28)
+#define	S3C2416_DSC0_CF_21mA	(3 << 28)
+#define	S3C2416_DSC0_CF_MASK	(3 << 28)
+
+#define S3C2416_DSC0_nRBE	(S3C2416_SELECT_DSC0 | 26)
+#define	S3C2416_DSC0_nRBE_5mA	(0 << 26)
+#define	S3C2416_DSC0_nRBE_10mA	(1 << 26)
+#define	S3C2416_DSC0_nRBE_15mA	(2 << 26)
+#define	S3C2416_DSC0_nRBE_21mA	(3 << 26)
+#define	S3C2416_DSC0_nRBE_MASK	(3 << 26)
+
+#define S3C2416_DSC0_nROE	(S3C2416_SELECT_DSC0 | 24)
+#define	S3C2416_DSC0_nROE_5mA	(0 << 24)
+#define	S3C2416_DSC0_nROE_10mA	(1 << 24)
+#define	S3C2416_DSC0_nROE_15mA	(2 << 24)
+#define	S3C2416_DSC0_nROE_21mA	(3 << 24)
+#define	S3C2416_DSC0_nROE_MASK	(3 << 24)
+
+#endif
+
 #if defined(CONFIG_CPU_S3C244X)
 
 #define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)

arch/arm/mach-s3c2410/include/mach/regs-gpio.h

@@ -592,29 +592,50 @@
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
+#define S3C2416_GPH0_TXD0  (0x02 << 0)
 
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
+#define S3C2416_GPH1_RXD0  (0x02 << 2)
 
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
+#define S3C2416_GPH2_TXD1   (0x02 << 4)
 
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
+#define S3C2416_GPH3_RXD1   (0x02 << 6)
 
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
+#define S3C2416_GPH4_TXD2   (0x02 << 8)
 
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
+#define S3C2416_GPH5_RXD2   (0x02 << 10)
 
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2416_GPH6_TXD3   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
+#define S3C2416_GPH6_nRTS2  (0x03 << 12)
 
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2416_GPH7_RXD3   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
+#define S3C2416_GPH7_nCTS2  (0x03 << 14)
 
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
+#define S3C2416_GPH8_nCTS0  (0x02 << 16)
 
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+#define S3C2416_GPH9_nRTS0    (0x02 << 18)
 
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+#define S3C2416_GPH10_nCTS1   (0x02 << 20)
+
+#define S3C2416_GPH11_nRTS1   (0x02 << 22)
+
+#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
+
+#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
+
+#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
  * GPH, which means all registers after 0x80 are now offset by 0x10
@@ -685,6 +706,7 @@
 #define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
 
 #define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2416_MISCCR_SEL_SUSPND   (1<<12)
 #define S3C2410_MISCCR_USBSUSPND1   (1<<13)
 
 #define S3C2410_MISCCR_nRSTCON	    (1<<16)
@@ -694,6 +716,9 @@
 #define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
 #define S3C2410_MISCCR_SDSLEEP	    (7<<17)
 
+#define S3C2416_MISCCR_FLT_I2C      (1<<24)
+#define S3C2416_MISCCR_HSSPI_EN2    (1<<31)
+
 /* external interrupt control... */
 /* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
  * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
@@ -761,8 +786,11 @@
 #define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
 #define S3C2410_GSTATUS1_2410	   (0x32410000)
 #define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2416	   (0x32416003)
 #define S3C2410_GSTATUS1_2440	   (0x32440000)
 #define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+/* some 2416 CPUs report this value also */
+#define S3C2410_GSTATUS1_2450	   (0x32450003)
 
 #define S3C2410_GSTATUS2_WTRESET   (1<<2)
 #define S3C2410_GSTATUS2_OFFRESET  (1<<1)

arch/arm/mach-s3c2410/include/mach/regs-irq.h

@@ -27,6 +27,16 @@
 #define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
 #define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
 
+#define S3C2416_PRIORITY_MODE1		S3C2410_IRQREG(0x030)
+#define S3C2416_PRIORITY_UPDATE1	S3C2410_IRQREG(0x034)
+#define S3C2416_SRCPND2			S3C2410_IRQREG(0x040)
+#define S3C2416_INTMOD2			S3C2410_IRQREG(0x044)
+#define S3C2416_INTMSK2			S3C2410_IRQREG(0x048)
+#define S3C2416_INTPND2			S3C2410_IRQREG(0x050)
+#define S3C2416_INTOFFSET2		S3C2410_IRQREG(0x054)
+#define S3C2416_PRIORITY_MODE2		S3C2410_IRQREG(0x070)
+#define S3C2416_PRIORITY_UPDATE2	S3C2410_IRQREG(0x074)
+
 /* mask: 0=enable, 1=disable
  * 1 bit EINT, 4=EINT4, 23=EINT23
  * EINT0,1,2,3 are not handled here.

arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h

+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2416_MEM
+#define __ASM_ARM_REGS_S3C2416_MEM
+
+#ifndef S3C2416_MEMREG
+#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2416_BANKCFG			S3C2416_MEMREG(0x00)
+#define S3C2416_BANKCON1		S3C2416_MEMREG(0x04)
+#define S3C2416_BANKCON2		S3C2416_MEMREG(0x08)
+#define S3C2416_BANKCON3		S3C2416_MEMREG(0x0C)
+
+#define S3C2416_REFRESH			S3C2416_MEMREG(0x10)
+#define S3C2416_TIMEOUT			S3C2416_MEMREG(0x14)
+
+#endif /*  __ASM_ARM_REGS_S3C2416_MEM */

arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h

+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2416_H
+#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
+
+#define S3C2416_SWRST		(S3C24XX_VA_CLKPWR + 0x44)
+#define S3C2416_SWRST_RESET	(0x533C2416)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif	/* __ASM_ARCH_REGS_S3C2416_H */
+

arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h

@@ -83,8 +83,7 @@
 #define S3C2443_HCLKCON_DMA4		(1<<4)
 #define S3C2443_HCLKCON_DMA5		(1<<5)
 #define S3C2443_HCLKCON_CAMIF		(1<<8)
-#define S3C2443_HCLKCON_DISP		(1<<9)
-#define S3C2443_HCLKCON_LCDC		(1<<10)
+#define S3C2443_HCLKCON_LCDC		(1<<9)
 #define S3C2443_HCLKCON_USBH		(1<<11)
 #define S3C2443_HCLKCON_USBD		(1<<12)
 #define S3C2443_HCLKCON_HSMMC		(1<<16)

arch/arm/mach-s3c2410/include/mach/uncompress.h

@@ -40,7 +40,9 @@ static void arch_detect_cpu(void)
 	cpuid &= S3C2410_GSTATUS1_IDMASK;
 
 	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442) {
+	    cpuid == S3C2410_GSTATUS1_2442 ||
+	    cpuid == S3C2410_GSTATUS1_2416 ||
+	    cpuid == S3C2410_GSTATUS1_2450) {
 		fifo_mask = S3C2440_UFSTAT_TXMASK;
 		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
 	} else {

arch/arm/mach-s3c2412/Kconfig

@@ -16,7 +16,8 @@ config CPU_S3C2412
 config CPU_S3C2412_ONLY
 	bool
 	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412
+		   !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
 
 config S3C2412_DMA

arch/arm/mach-s3c2416/Kconfig

+# arch/arm/mach-s3c2416/Kconfig
+#
+# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+#
+# Licensed under GPLv2
+
+# note, this also supports the S3C2450 which is so similar it has the same
+# ID code as the S3C2416.
+
+config CPU_S3C2416
+	bool
+	depends on ARCH_S3C2410
+	select CPU_ARM926T
+	select S3C2416_DMA if S3C2410_DMA
+	select CPU_LLSERIAL_S3C2440
+	select S3C_GPIO_PULL_UPDOWN
+	select SAMSUNG_CLKSRC
+	select S3C2443_CLOCK
+	help
+	  Support for the S3C2416 SoC from the S3C24XX line
+
+config S3C2416_DMA
+	bool
+	depends on CPU_S3C2416
+	help
+	  Internal config node for S3C2416 DMA support
+
+menu "S3C2416 Machines"
+
+config MACH_SMDK2416
+	bool "SMDK2416"
+	select CPU_S3C2416
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	help
+	  Say Y here if you are using an SMDK2416
+
+endmenu

arch/arm/mach-s3c2416/Makefile

+# arch/arm/mach-s3c2416/Makefile
+#
+# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock.o
+obj-$(CONFIG_CPU_S3C2416)	+= irq.o
+
+#obj-$(CONFIG_S3C2416_DMA)	+= dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2416)	+= mach-smdk2416.o

arch/arm/mach-s3c2416/clock.c

+/* linux/arch/arm/mach-s3c2416/clock.c
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * S3C2416 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <plat/s3c2416.h>
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/pll6553x.h>
+#include <plat/pll.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2443-clock.h>
+
+static unsigned int armdiv[8] = {
+	[0] = 1,
+	[1] = 2,
+	[2] = 3,
+	[3] = 4,
+	[5] = 6,
+	[7] = 8,
+};
+
+/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */
+static struct clksrc_clk hsmmc_div[] = {
+	[0] = {
+		.clk = {
+			.name	= "hsmmc-div",
+			.id	= 1,
+			.parent	= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
+	},
+	[1] = {
+		.clk = {
+			.name	= "hsmmc-div",
+			.id	= 0,
+			.parent	= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
+	},
+};
+
+static struct clksrc_clk hsmmc_mux[] = {
+	[0] = {
+		.clk	= {
+			.id	= 1,
+			.name	= "hsmmc-if",
+			.ctrlbit = (1 << 6),
+			.enable = s3c2443_clkcon_enable_s,
+		},
+		.sources = &(struct clksrc_sources) {
+			.nr_sources = 2,
+			.sources = (struct clk *[]) {
+				[0] = &hsmmc_div[0].clk,
+				[1] = NULL, /* to fix */
+			},
+		},
+		.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
+	},
+	[1] = {
+		.clk	= {
+			.id	= 0,
+			.name	= "hsmmc-if",
+			.ctrlbit = (1 << 12),
+			.enable = s3c2443_clkcon_enable_s,
+		},
+		.sources = &(struct clksrc_sources) {
+			.nr_sources = 2,
+			.sources = (struct clk *[]) {
+				[0] = &hsmmc_div[1].clk,
+				[1] = NULL, /* to fix */
+			},
+		},
+		.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
+	},
+};
+
+
+static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
+{
+	clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+void __init_or_cpufreq s3c2416_setup_clocks(void)
+{
+	s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+}
+
+
+static struct clksrc_clk *clksrcs[] __initdata = {
+	&hsmmc_div[0],
+	&hsmmc_div[1],
+	&hsmmc_mux[0],
+	&hsmmc_mux[1],
+};
+
+void __init s3c2416_init_clocks(int xtal)
+{
+	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
+	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
+	int ptr;
+
+	/* s3c2416 EPLL compatible with s3c64xx */
+	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
+
+	clk_epll.parent = &clk_epllref.clk;
+
+	s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
+
+	s3c_pwmclk_init();
+
+}

arch/arm/mach-s3c2416/irq.c

+/* linux/arch/arm/mach-s3c2416/irq.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+
+static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
+{
+	unsigned int subsrc, submsk;
+	unsigned int end;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc  &= ~submsk;
+	subsrc >>= (irq - S3C2410_IRQSUB(0));
+	subsrc  &= (1 << len)-1;
+
+	end = len + irq;
+
+	for (; irq < end && subsrc; irq++) {
+		if (subsrc & 1)
+			generic_handle_irq(irq);
+
+		subsrc >>= 1;
+	}
+}
+
+/* WDT/AC97 sub interrupts */
+
+static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
+}
+
+#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
+#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
+
+static void s3c2416_irq_wdtac97_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static void s3c2416_irq_wdtac97_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+}
+
+static void s3c2416_irq_wdtac97_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static struct irq_chip s3c2416_irq_wdtac97 = {
+	.mask	    = s3c2416_irq_wdtac97_mask,
+	.unmask	    = s3c2416_irq_wdtac97_unmask,
+	.ack	    = s3c2416_irq_wdtac97_ack,
+};
+
+
+/* LCD sub interrupts */
+
+static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
+}
+
+#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
+#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
+
+static void s3c2416_irq_lcd_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static void s3c2416_irq_lcd_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_LCD);
+}
+
+static void s3c2416_irq_lcd_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static struct irq_chip s3c2416_irq_lcd = {
+	.mask	    = s3c2416_irq_lcd_mask,
+	.unmask	    = s3c2416_irq_lcd_unmask,
+	.ack	    = s3c2416_irq_lcd_ack,
+};
+
+
+/* DMA sub interrupts */
+
+static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
+}
+
+#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
+#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
+
+
+static void s3c2416_irq_dma_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static void s3c2416_irq_dma_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_DMA);
+}
+
+static void s3c2416_irq_dma_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static struct irq_chip s3c2416_irq_dma = {
+	.mask	    = s3c2416_irq_dma_mask,
+	.unmask	    = s3c2416_irq_dma_unmask,
+	.ack	    = s3c2416_irq_dma_ack,
+};
+
+
+/* UART3 sub interrupts */
+
+static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+}
+
+#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
+#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+
+
+static void s3c2416_irq_uart3_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static void s3c2416_irq_uart3_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART3);
+}
+
+static void s3c2416_irq_uart3_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static struct irq_chip s3c2416_irq_uart3 = {
+	.mask	    = s3c2416_irq_uart3_mask,
+	.unmask	    = s3c2416_irq_uart3_unmask,
+	.ack	    = s3c2416_irq_uart3_ack,
+};
+
+
+/* IRQ initialisation code */
+
+static int __init s3c2416_add_sub(unsigned int base,
+				   void (*demux)(unsigned int,
+						 struct irq_desc *),
+				   struct irq_chip *chip,
+				   unsigned int start, unsigned int end)
+{
+	unsigned int irqno;
+
+	set_irq_chip(base, &s3c_irq_level_chip);
+	set_irq_handler(base, handle_level_irq);
+	set_irq_chained_handler(base, demux);
+
+	for (irqno = start; irqno <= end; irqno++) {
+		set_irq_chip(irqno, chip);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static int __init s3c2416_irq_add(struct sys_device *sysdev)
+{
+	printk(KERN_INFO "S3C2416: IRQ Support\n");
+
+	s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
+			IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
+
+	s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
+			&s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
+
+	s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
+			&s3c2416_irq_uart3,
+			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
+
+	s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
+			&s3c2416_irq_wdtac97,
+			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2416_irq_driver = {
+	.add		= s3c2416_irq_add,
+};
+
+static int __init s3c2416_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver);
+}
+
+arch_initcall(s3c2416_irq_init);
+

arch/arm/mach-s3c2416/mach-smdk2416.c

+/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/idle.h>
+#include <mach/leds-gpio.h>
+#include <plat/iic.h>
+
+#include <plat/s3c2416.h>
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/nand.h>
+
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+
+#include <plat/common-smdk.h>
+
+static struct map_desc smdk2416_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON (S3C2410_UCON_DEFAULT	| \
+		S3C2440_UCON_PCLK	| \
+		S3C2443_UCON_RXERR_IRQEN)
+
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+
+#define UFCON (S3C2410_UFCON_RXTRIG8	| \
+		S3C2410_UFCON_FIFOMODE	| \
+		S3C2440_UFCON_TXTRIG16)
+
+static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON | 0x50,
+		.ufcon	     = UFCON,
+	}
+};
+
+struct s3c_fb_pd_win smdk2416_fb_win[] = {
+	[0] = {
+		/* think this is the same as the smdk6410 */
+		.win_mode	= {
+			.pixclock	= 41094,
+			.left_margin	= 8,
+			.right_margin	= 13,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres           = 800,
+			.yres           = 480,
+		},
+		.default_bpp	= 16,
+		.max_bpp	= 32,
+	},
+};
+
+static void s3c2416_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio;
+
+	for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
+
+static struct s3c_fb_platdata smdk2416_fb_platdata = {
+	.win[0]		= &smdk2416_fb_win[0],
+	.setup_gpio	= s3c2416_fb_gpio_setup_24bpp,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct platform_device *smdk2416_devices[] __initdata = {
+	&s3c_device_fb,
+	&s3c_device_wdt,
+	&s3c_device_ohci,
+	&s3c_device_i2c0,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+};
+
+static void __init smdk2416_map_io(void)
+{
+	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+}
+
+static void __init smdk2416_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk2416_fb_platdata);
+
+	gpio_request(S3C2410_GPB(4), "USBHost Power");
+	gpio_direction_output(S3C2410_GPB(4), 1);
+
+	gpio_request(S3C2410_GPB(3), "Display Power");
+	gpio_direction_output(S3C2410_GPB(3), 1);
+
+	gpio_request(S3C2410_GPB(1), "Display Reset");
+	gpio_direction_output(S3C2410_GPB(1), 1);
+
+	platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
+	smdk_machine_init();
+}
+
+MACHINE_START(SMDK2416, "SMDK2416")
+	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2416_map_io,
+	.init_machine	= smdk2416_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END

arch/arm/mach-s3c2416/s3c2416.c

+/* linux/arch/arm/mach-s3c2416/s3c2416.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * Samsung S3C2416 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+
+#include <mach/reset.h>
+#include <mach/idle.h>
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/s3c2416.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <plat/iic-core.h>
+
+static struct map_desc s3c2416_iodesc[] __initdata = {
+	IODESC_ENT(WATCHDOG),
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+};
+
+struct sysdev_class s3c2416_sysclass = {
+	.name = "s3c2416-core",
+};
+
+static struct sys_device s3c2416_sysdev = {
+	.cls		= &s3c2416_sysclass,
+};
+
+static void s3c2416_hard_reset(void)
+{
+	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2416_init(void)
+{
+	printk(KERN_INFO "S3C2416: Initializing architecture\n");
+
+	s3c24xx_reset_hook = s3c2416_hard_reset;
+	/* s3c24xx_idle = s3c2416_idle;	*/
+
+	/* change WDT IRQ number */
+	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_fb.name = "s3c2443-fb";
+
+	return sysdev_register(&s3c2416_sysdev);
+}
+
+void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+
+	s3c_device_nand.name = "s3c2416-nand";
+}
+
+/* s3c2416_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2416_map_io(void)
+{
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+
+	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2416 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2416_core_init(void)
+{
+	return sysdev_class_register(&s3c2416_sysclass);
+}
+
+core_initcall(s3c2416_core_init);

arch/arm/mach-s3c2443/Kconfig

@@ -8,6 +8,7 @@ config CPU_S3C2443
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
+	select S3C2443_CLOCK
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 

arch/arm/mach-s3c2443/clock.c

@@ -21,6 +21,7 @@
 */
 
 #include <linux/init.h>
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
@@ -54,111 +55,13 @@
  * set the correct muxing at initialisation
 */
 
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	u32 ctrlbit = clk->ctrlbit;
-	u32 con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
 /* clock selections */
 
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-	.id		= -1,
-};
-
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 	.id		= -1,
 };
 
-static struct clk *clk_epllref_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpllref,
-	[2] = &clk_xtal,
-	[3] = &clk_ext,
-};
-
-static struct clksrc_clk clk_epllref = {
-	.clk	= {
-		.name		= "epllref",
-		.id		= -1,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_epllref_sources,
-		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
-
-	return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_getrate_mdivclk,
-	},
-};
-
-static struct clk *clk_msysclk_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpll,
-	[2] = &clk_mdivclk,
-	[3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
-	.clk	= {
-		.name		= "msysclk",
-		.parent		= &clk_xtal,
-		.id		= -1,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_msysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
@@ -266,44 +169,6 @@ static struct clksrc_clk clk_arm = {
 	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
 };
 
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
-	[0] = &clk_epllref.clk,
-	[1] = &clk_epll,
-};
-
-static struct clksrc_clk clk_esysclk = {
-	.clk	= {
-		.name		= "esysclk",
-		.parent		= &clk_epll,
-		.id		= -1,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_sysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-/* uartclk
- *
- * UART baud-rate clock sourced from esysclk via a divisor
-*/
-
-static struct clksrc_clk clk_uart = {
-	.clk	= {
-		.name		= "uartclk",
-		.id		= -1,
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-
 /* hsspi
  *
  * high-speed spi clock, sourced from esysclk
@@ -320,21 +185,6 @@ static struct clksrc_clk clk_hsspi = {
 	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
 };
 
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
-	.clk	= {
-		.name		= "usb-bus-host-parent",
-		.id		= -1,
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
 
 /* clk_hsmcc_div
  *
@@ -433,88 +283,15 @@ static struct clksrc_clk clk_i2s = {
 	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
 };
 
-/* cam-if
- *
- * camera interface bus-clock, divided down from esysclk
-*/
-
-static struct clksrc_clk clk_cam = {
-	.clk	= {
-		.name		= "camif-upll",	/* same as 2440 name */
-		.id		= -1,
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-};
-
-/* display-if
- *
- * display interface clock, divided from esysclk
-*/
-
-static struct clksrc_clk clk_display = {
-	.clk	= {
-		.name		= "display-if",
-		.id		= -1,
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.id		= -1,
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_prediv_getrate,
-	},
-};
-
 /* standard clock definitions */
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-	}, {
 		.name		= "sdi",
 		.id		= -1,
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
 	}, {
 		.name		= "iis",
 		.id		= -1,
@@ -537,179 +314,12 @@ static struct clk init_clocks_disable[] = {
 };
 
 static struct clk init_clocks[] = {
-	{
-		.name		= "dma",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma",
-		.id		= 3,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma",
-		.id		= 4,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma",
-		.id		= 5,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "hsmmc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-	}, {
-		.name		= "cfc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.parent		= &clk_usb_bus_host.clk,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-static struct clksrc_clk __initdata *init_list[] = {
-	&clk_epllref, /* should be first */
-	&clk_esysclk,
-	&clk_msysclk,
-	&clk_arm,
-	&clk_i2s_eplldiv,
-	&clk_i2s,
-	&clk_cam,
-	&clk_uart,
-	&clk_display,
-	&clk_hsmmc_div,
-	&clk_usb_bus_host,
 };
 
-static void __init s3c2443_clk_initparents(void)
-{
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++)
-		s3c_set_clksrc(init_list[ptr], true);
-}
-
-static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return clkcon0 + 1;
-}
-
 /* clocks to add straight away */
 
 static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_usb_bus_host,
-	&clk_epllref,
-	&clk_esysclk,
-	&clk_msysclk,
 	&clk_arm,
-	&clk_uart,
-	&clk_display,
-	&clk_cam,
 	&clk_i2s_eplldiv,
 	&clk_i2s,
 	&clk_hsspi,
@@ -717,92 +327,32 @@ static struct clksrc_clk *clksrcs[] __initdata = {
 };
 
 static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus,
-	&clk_mpllref,
 	&clk_hsmmc,
 	&clk_armdiv,
-	&clk_prediv,
 };
 
 void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = s3c2443_get_mpll(mpllcon, xtal);
-	clk_msysclk.clk.rate = pll;
-
-	fclk = pll / s3c2443_fclk_div(clkdiv0);
-	hclk = s3c2443_prediv_getrate(&clk_prediv);
-	hclk /= s3c2443_get_hdiv(clkdiv0);
- 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-
-	printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
-	       print_mhz(pll), print_mhz(fclk),
-	       print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
+	s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
 }
 
 void __init s3c2443_init_clocks(int xtal)
 {
-	struct clk *clkp;
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ret;
 	int ptr;
 
-	/* s3c2443 parents h and p clocks from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_p.parent = &clk_prediv;
+	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
+	clk_epll.parent = &clk_epllref.clk;
+
+	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
 
-	s3c24xx_register_baseclocks(xtal);
 	s3c2443_setup_clocks();
-	s3c2443_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
 
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
 
-	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref.clk;
-	clk_usb_bus.parent = &clk_usb_bus_host.clk;
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
-	}
-
-	printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
 	/* register clocks from clock array */
 
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
@@ -819,17 +369,8 @@ void __init s3c2443_init_clocks(int xtal)
 
 	/* install (and disable) the clocks we do not need immediately */
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }

arch/arm/mach-s3c64xx/include/mach/pll.h

@@ -20,6 +20,7 @@
 #define S3C6400_PLL_SDIV_SHIFT	(0)
 
 #include <asm/div64.h>
+#include <plat/pll6553x.h>
 
 static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
 					    u32 pllcon)
@@ -37,38 +38,8 @@ static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
 	return (unsigned long)fvco;
 }
 
-#define S3C6400_EPLL_MDIV_MASK	((1 << (23-16)) - 1)
-#define S3C6400_EPLL_PDIV_MASK	((1 << (13-8)) - 1)
-#define S3C6400_EPLL_SDIV_MASK	((1 << (2-0)) - 1)
-#define S3C6400_EPLL_MDIV_SHIFT	(16)
-#define S3C6400_EPLL_PDIV_SHIFT	(8)
-#define S3C6400_EPLL_SDIV_SHIFT	(0)
-#define S3C6400_EPLL_KDIV_MASK  (0xffff)
-
 static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
 {
-	unsigned long result;
-	u32 epll0 = __raw_readl(S3C_EPLL_CON0);
-	u32 epll1 = __raw_readl(S3C_EPLL_CON1);
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK;
-	pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK;
-	sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK;
-	kdiv = epll1 & S3C6400_EPLL_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
+	return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
+				__raw_readl(S3C_EPLL_CON1));
 }

arch/arm/plat-s3c24xx/Kconfig

@@ -45,6 +45,12 @@ config S3C2410_CLOCK
 	  Clock code for the S3C2410, and similar processors which
 	  is currently includes the S3C2410, S3C2440, S3C2442.
 
+config S3C2443_CLOCK
+	bool
+	help
+	  Clock code for the S3C2443 and similar processors, which includes
+	  the S3C2416 and S3C2450.
+
 config S3C24XX_DCLK
 	bool
 	help

arch/arm/plat-s3c24xx/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
+obj-$(CONFIG_S3C2443_CLOCK)	+= s3c2443-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o

arch/arm/plat-s3c24xx/cpu.c

@@ -49,6 +49,7 @@
 #include <plat/s3c2400.h>
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
+#include <plat/s3c2416.h>
 #include <plat/s3c244x.h>
 #include <plat/s3c2443.h>
 
@@ -57,6 +58,7 @@
 static const char name_s3c2400[]  = "S3C2400";
 static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
+static const char name_s3c2416[]  = "S3C2416/S3C2450";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
 static const char name_s3c2442b[]  = "S3C2442B";
@@ -137,6 +139,15 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
 	},
+	{			/* a strange version of the s3c2416 */
+		.idcode		= 0x32450003,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2416_map_io,
+		.init_clocks	= s3c2416_init_clocks,
+		.init_uarts	= s3c2416_init_uarts,
+		.init		= s3c2416_init,
+		.name		= name_s3c2416,
+	},
 	{
 		.idcode		= 0x32443001,
 		.idmask		= 0xffffffff,
@@ -170,6 +181,16 @@ static struct map_desc s3c_iodesc[] __initdata = {
 
 static unsigned long s3c24xx_read_idcode_v5(void)
 {
+#if defined(CONFIG_CPU_S3C2416)
+	/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
+
+	u32 gs = __raw_readl(S3C24XX_GSTATUS1);
+
+	/* test for s3c2416 or similar device */
+	if ((gs >> 16) == 0x3245)
+		return gs;
+#endif
+
 #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
 	return __raw_readl(S3C2412_GSTATUS1);
 #else

arch/arm/plat-s3c24xx/include/plat/pll.h

@@ -35,3 +35,28 @@ s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
 
 	return (unsigned int)fvco;
 }
+
+#define S3C2416_PLL_M_SHIFT	(14)
+#define S3C2416_PLL_P_SHIFT	(5)
+#define S3C2416_PLL_S_MASK	(7)
+#define S3C2416_PLL_M_MASK	((1 << 10) - 1)
+#define S3C2416_PLL_P_MASK	(63)
+
+static inline unsigned int
+s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int m, p, s;
+	uint64_t fvco;
+
+	m = pllval >> S3C2416_PLL_M_SHIFT;
+	p = pllval >> S3C2416_PLL_P_SHIFT;
+
+	s = pllval & S3C2416_PLL_S_MASK;
+	m &= S3C2416_PLL_M_MASK;
+	p &= S3C2416_PLL_P_MASK;
+
+	fvco = (uint64_t)baseclk * m;
+	do_div(fvco, (p << s));
+
+	return (unsigned int)fvco;
+}

arch/arm/plat-s3c24xx/include/plat/s3c2416.h

+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * Header file for s3c2416 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2416
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2416_init(void);
+
+extern void s3c2416_map_io(void);
+
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2416_init_clocks(int xtal);
+
+extern  int s3c2416_baseclk_add(void);
+
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif

arch/arm/plat-s3c24xx/include/plat/s3c2443.h

@@ -30,3 +30,22 @@ extern  int s3c2443_baseclk_add(void);
 #define s3c2443_map_io NULL
 #define s3c2443_init NULL
 #endif
+
+/* common code used by s3c2443 and others.
+ * note, not to be used outside of arch/arm/mach-s3c* */
+
+struct clk;	/* some files don't need clk.h otherwise */
+
+typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
+typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
+
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
+
+extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
+
+extern struct clksrc_clk clk_epllref;
+extern struct clksrc_clk clk_esysclk;
+extern struct clksrc_clk clk_msysclk;

arch/arm/plat-s3c24xx/s3c2410-clock.c

@@ -87,7 +87,7 @@ static int s3c2410_upll_enable(struct clk *clk, int enable)
 
 /* standard clock definitions */
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "nand",
 		.id		= -1,
@@ -249,17 +249,8 @@ int __init s3c2410_baseclk_add(void)
 
 	/* install (and disable) the clocks we do not need immediately */
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2410_clkcon_enable(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	/* show the clock-slow value */
 

arch/arm/plat-s3c24xx/s3c2443-clock.c

+/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
+ *
+ * Copyright (c) 2007, 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 Clock control suport - common code
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu.h>
+
+#include <plat/cpu-freq.h>
+
+
+static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+	u32 ctrlbit = clk->ctrlbit;
+	u32 con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
+}
+
+int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
+}
+
+int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
+}
+
+/* mpllref is a direct descendant of clk_xtal by default, but it is not
+ * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
+ * such directly equating the two source clocks is impossible.
+ */
+struct clk clk_mpllref = {
+	.name		= "mpllref",
+	.parent		= &clk_xtal,
+	.id		= -1,
+};
+
+static struct clk *clk_epllref_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpllref,
+	[2] = &clk_xtal,
+	[3] = &clk_ext,
+};
+
+struct clksrc_clk clk_epllref = {
+	.clk	= {
+		.name		= "epllref",
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_epllref_sources,
+		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
+};
+
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
+
+static struct clk *clk_sysclk_sources[] = {
+	[0] = &clk_epllref.clk,
+	[1] = &clk_epll,
+};
+
+struct clksrc_clk clk_esysclk = {
+	.clk	= {
+		.name		= "esysclk",
+		.parent		= &clk_epll,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_sysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
+};
+
+static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+
+	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
+	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
+
+	return parent_rate / (div + 1);
+}
+
+static struct clk clk_mdivclk = {
+	.name		= "mdivclk",
+	.parent		= &clk_mpllref,
+	.id		= -1,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_getrate_mdivclk,
+	},
+};
+
+static struct clk *clk_msysclk_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpll,
+	[2] = &clk_mdivclk,
+	[3] = &clk_mpllref,
+};
+
+struct clksrc_clk clk_msysclk = {
+	.clk	= {
+		.name		= "msysclk",
+		.parent		= &clk_xtal,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_msysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
+};
+
+/* prediv
+ *
+ * this divides the msysclk down to pass to h/p/etc.
+ */
+
+static unsigned long s3c2443_prediv_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+	return rate / (clkdiv0 + 1);
+}
+
+static struct clk clk_prediv = {
+	.name		= "prediv",
+	.id		= -1,
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_prediv_getrate,
+	},
+};
+
+/* usbhost
+ *
+ * usb host bus-clock, usually 48MHz to provide USB bus clock timing
+*/
+
+static struct clksrc_clk clk_usb_bus_host = {
+	.clk	= {
+		.name		= "usb-bus-host-parent",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
+};
+
+/* common clksrc clocks */
+
+static struct clksrc_clk clksrc_clks[] = {
+	{
+		/* ART baud-rate clock sourced from esysclk via a divisor */
+		.clk	= {
+			.name		= "uartclk",
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
+	}, {
+		/* camera interface bus-clock, divided down from esysclk */
+		.clk	= {
+			.name		= "camif-upll",	/* same as 2440 name */
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
+			.enable		= s3c2443_clkcon_enable_s,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
+	}, {
+		.clk	= {
+			.name		= "display-if",
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
+			.enable		= s3c2443_clkcon_enable_s,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
+	},
+};
+
+
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIC,
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "dma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA0,
+	}, {
+		.name		= "dma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA1,
+	}, {
+		.name		= "dma",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA2,
+	}, {
+		.name		= "dma",
+		.id		= 3,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA3,
+	}, {
+		.name		= "dma",
+		.id		= 4,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA4,
+	}, {
+		.name		= "dma",
+		.id		= 5,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA5,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBD,
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_LCDC,
+
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_PWMT,
+	}, {
+		.name		= "cfc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_CFC,
+	}, {
+		.name		= "ssmc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_SSMC,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C2443_PCLKCON_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C2443_PCLKCON_AC97,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus_host.clk,
+	}
+};
+
+static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
+
+	return clkcon0 + 1;
+}
+
+/* EPLLCON compatible enough to get on/off information */
+
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
+						   fdiv_fn get_fdiv)
+{
+	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long pll;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long pclk;
+	int ptr;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	pll = get_mpll(mpllcon, xtal);
+	clk_msysclk.clk.rate = pll;
+
+	fclk = pll / get_fdiv(clkdiv0);
+	hclk = s3c2443_prediv_getrate(&clk_prediv);
+	hclk /= s3c2443_get_hdiv(clkdiv0);
+	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
+
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+
+	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
+	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(pll), print_mhz(fclk),
+	       print_mhz(hclk), print_mhz(pclk));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
+		s3c_set_clksrc(&clksrc_clks[ptr], true);
+
+	/* ensure usb bus clock is within correct rate of 48MHz */
+
+	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
+		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
+		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
+	}
+
+	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(clk_get_rate(&clk_epll)),
+	       print_mhz(clk_get_rate(&clk_usb_bus)));
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_prediv,
+	&clk_mpllref,
+	&clk_mdivclk,
+	&clk_ext,
+	&clk_epll,
+	&clk_usb_bus,
+};
+
+static struct clksrc_clk *clksrcs[] __initdata = {
+	&clk_usb_bus_host,
+	&clk_epllref,
+	&clk_esysclk,
+	&clk_msysclk,
+};
+
+void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+				       fdiv_fn get_fdiv)
+{
+	int ptr;
+
+	/* s3c2443 parents h and p clocks from prediv */
+	clk_h.parent = &clk_prediv;
+	clk_p.parent = &clk_prediv;
+
+	clk_usb_bus.parent = &clk_usb_bus_host.clk;
+	clk_epll.parent = &clk_epllref.clk;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
+
+	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	/* See s3c2443/etc notes on disabling clocks at init time */
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+}

arch/arm/plat-samsung/clock.c

@@ -376,6 +376,21 @@ void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
 	}
 }
 
+/**
+ * s3c_disable_clocks() - disable an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * for internal use only at initialisation time. disable the clocks in the
+ * @clkp array.
+ */
+
+void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
+{
+	for (; nr_clks > 0; nr_clks--, clkp++)
+		(clkp->enable)(clkp, 0);
+}
+
 /* initalise all the clocks */
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)

arch/arm/plat-samsung/dev-fb.c

@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <mach/regs-fb.h>
 
 #include <plat/fb.h>
 #include <plat/devs.h>

arch/arm/plat-samsung/include/plat/clock.h

@@ -92,6 +92,7 @@ extern int s3c24xx_register_clock(struct clk *clk);
 extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
 extern void s3c_register_clocks(struct clk *clk, int nr_clks);
+extern void s3c_disable_clocks(struct clk *clkp, int nr_clks);
 
 extern int s3c24xx_register_baseclocks(unsigned long xtal);
 

arch/arm/plat-samsung/include/plat/cpu.h

@@ -73,6 +73,7 @@ extern struct sys_timer s3c24xx_timer;
 extern struct sysdev_class s3c2410_sysclass;
 extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2416_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;

arch/arm/plat-samsung/include/plat/fb.h

@@ -15,6 +15,13 @@
 #ifndef __PLAT_S3C_FB_H
 #define __PLAT_S3C_FB_H __FILE__
 
+/* S3C_FB_MAX_WIN
+ * Set to the maximum number of windows that any of the supported hardware
+ * can use. Since the platform data uses this for an array size, having it
+ * set to the maximum of any version of the hardware can do is safe.
+ */
+#define S3C_FB_MAX_WIN	(5)
+
 /**
  * struct s3c_fb_pd_win - per window setup data
  * @win_mode: The display parameters to initialise (not for window 0)

arch/arm/plat-samsung/include/plat/pll6553x.h

+/* arch/arm/plat-samsung/include/plat/pll6553x.h
+ *	partially from arch/arm/mach-s3c64xx/include/mach/pll.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung PLL6553x PLL code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* S3C6400 and compatible (S3C2416, etc.) EPLL code */
+
+#define PLL6553X_MDIV_MASK	((1 << (23-16)) - 1)
+#define PLL6553X_PDIV_MASK	((1 << (13-8)) - 1)
+#define PLL6553X_SDIV_MASK	((1 << (2-0)) - 1)
+#define PLL6553X_MDIV_SHIFT	(16)
+#define PLL6553X_PDIV_SHIFT	(8)
+#define PLL6553X_SDIV_SHIFT	(0)
+#define PLL6553X_KDIV_MASK	(0xffff)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+					     u32 pll0, u32 pll1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+	pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+	sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+	kdiv = pll1 & PLL6553X_KDIV_MASK;
+
+	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}

drivers/serial/Kconfig

@@ -518,12 +518,13 @@ config SERIAL_S3C2412
 	  Serial port support for the Samsung S3C2412 and S3C2413 SoC
 
 config SERIAL_S3C2440
-	tristate "Samsung S3C2440/S3C2442 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+	tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
 	default y if CPU_S3C2440
 	default y if CPU_S3C2442
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
 	help
-	  Serial port support for the Samsung S3C2440 and S3C2442 SoC
+	  Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
 
 config SERIAL_S3C24A0
 	tristate "Samsung S3C24A0 Serial port support"