ath9k_hw: Cleanup power mode API

The 'setChip' variable is unused, remove it and
simplify the functions.
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/hw.c

@@ -2004,39 +2004,38 @@ EXPORT_SYMBOL(ath9k_hw_reset);
  * Notify Power Mgt is disabled in self-generated frames.
  * If requested, force chip to sleep.
  */
-static void ath9k_set_power_sleep(struct ath_hw *ah, int setChip)
+static void ath9k_set_power_sleep(struct ath_hw *ah)
 {
 	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
-	if (setChip) {
-		if (AR_SREV_9462(ah)) {
-			REG_WRITE(ah, AR_TIMER_MODE,
-				  REG_READ(ah, AR_TIMER_MODE) & 0xFFFFFF00);
-			REG_WRITE(ah, AR_NDP2_TIMER_MODE, REG_READ(ah,
-				  AR_NDP2_TIMER_MODE) & 0xFFFFFF00);
-			REG_WRITE(ah, AR_SLP32_INC,
-				  REG_READ(ah, AR_SLP32_INC) & 0xFFF00000);
-			/* xxx Required for WLAN only case ? */
-			REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, 0);
-			udelay(100);
-		}
 
-		/*
-		 * Clear the RTC force wake bit to allow the
-		 * mac to go to sleep.
-		 */
-		REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN);
+	if (AR_SREV_9462(ah)) {
+		REG_WRITE(ah, AR_TIMER_MODE,
+			  REG_READ(ah, AR_TIMER_MODE) & 0xFFFFFF00);
+		REG_WRITE(ah, AR_NDP2_TIMER_MODE,
+			  REG_READ(ah, AR_NDP2_TIMER_MODE) & 0xFFFFFF00);
+		REG_WRITE(ah, AR_SLP32_INC,
+			  REG_READ(ah, AR_SLP32_INC) & 0xFFF00000);
+		/* xxx Required for WLAN only case ? */
+		REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, 0);
+		udelay(100);
+	}
 
-		if (AR_SREV_9462(ah))
-			udelay(100);
+	/*
+	 * Clear the RTC force wake bit to allow the
+	 * mac to go to sleep.
+	 */
+	REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN);
 
-		if (!AR_SREV_9100(ah) && !AR_SREV_9300_20_OR_LATER(ah))
-			REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF);
+	if (AR_SREV_9462(ah))
+		udelay(100);
 
-		/* Shutdown chip. Active low */
-		if (!AR_SREV_5416(ah) && !AR_SREV_9271(ah)) {
-			REG_CLR_BIT(ah, AR_RTC_RESET, AR_RTC_RESET_EN);
-			udelay(2);
-		}
+	if (!AR_SREV_9100(ah) && !AR_SREV_9300_20_OR_LATER(ah))
+		REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF);
+
+	/* Shutdown chip. Active low */
+	if (!AR_SREV_5416(ah) && !AR_SREV_9271(ah)) {
+		REG_CLR_BIT(ah, AR_RTC_RESET, AR_RTC_RESET_EN);
+		udelay(2);
 	}
 
 	/* Clear Bit 14 of AR_WA after putting chip into Full Sleep mode. */
@@ -2049,44 +2048,42 @@ static void ath9k_set_power_sleep(struct ath_hw *ah, int setChip)
  * frames. If request, set power mode of chip to
  * auto/normal.  Duration in units of 128us (1/8 TU).
  */
-static void ath9k_set_power_network_sleep(struct ath_hw *ah, int setChip)
+static void ath9k_set_power_network_sleep(struct ath_hw *ah)
 {
+	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	u32 val;
 
 	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
-	if (setChip) {
-		struct ath9k_hw_capabilities *pCap = &ah->caps;
 
-		if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
-			/* Set WakeOnInterrupt bit; clear ForceWake bit */
-			REG_WRITE(ah, AR_RTC_FORCE_WAKE,
-				  AR_RTC_FORCE_WAKE_ON_INT);
-		} else {
+	if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+		/* Set WakeOnInterrupt bit; clear ForceWake bit */
+		REG_WRITE(ah, AR_RTC_FORCE_WAKE,
+			  AR_RTC_FORCE_WAKE_ON_INT);
+	} else {
 
-			/* When chip goes into network sleep, it could be waken
-			 * up by MCI_INT interrupt caused by BT's HW messages
-			 * (LNA_xxx, CONT_xxx) which chould be in a very fast
-			 * rate (~100us). This will cause chip to leave and
-			 * re-enter network sleep mode frequently, which in
-			 * consequence will have WLAN MCI HW to generate lots of
-			 * SYS_WAKING and SYS_SLEEPING messages which will make
-			 * BT CPU to busy to process.
-			 */
-			if (AR_SREV_9462(ah)) {
-				val = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_EN) &
-					~AR_MCI_INTERRUPT_RX_HW_MSG_MASK;
-				REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, val);
-			}
-			/*
-			 * Clear the RTC force wake bit to allow the
-			 * mac to go to sleep.
-			 */
-			REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE,
-				    AR_RTC_FORCE_WAKE_EN);
-
-			if (AR_SREV_9462(ah))
-				udelay(30);
+		/* When chip goes into network sleep, it could be waken
+		 * up by MCI_INT interrupt caused by BT's HW messages
+		 * (LNA_xxx, CONT_xxx) which chould be in a very fast
+		 * rate (~100us). This will cause chip to leave and
+		 * re-enter network sleep mode frequently, which in
+		 * consequence will have WLAN MCI HW to generate lots of
+		 * SYS_WAKING and SYS_SLEEPING messages which will make
+		 * BT CPU to busy to process.
+		 */
+		if (AR_SREV_9462(ah)) {
+			val = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_EN) &
+				~AR_MCI_INTERRUPT_RX_HW_MSG_MASK;
+			REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, val);
 		}
+		/*
+		 * Clear the RTC force wake bit to allow the
+		 * mac to go to sleep.
+		 */
+		REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE,
+			    AR_RTC_FORCE_WAKE_EN);
+
+		if (AR_SREV_9462(ah))
+			udelay(30);
 	}
 
 	/* Clear Bit 14 of AR_WA after putting chip into Net Sleep mode. */
@@ -2094,7 +2091,7 @@ static void ath9k_set_power_network_sleep(struct ath_hw *ah, int setChip)
 		REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE);
 }
 
-static bool ath9k_hw_set_power_awake(struct ath_hw *ah, int setChip)
+static bool ath9k_hw_set_power_awake(struct ath_hw *ah)
 {
 	u32 val;
 	int i;
@@ -2105,37 +2102,35 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah, int setChip)
 		udelay(10);
 	}
 
-	if (setChip) {
-		if ((REG_READ(ah, AR_RTC_STATUS) &
-		     AR_RTC_STATUS_M) == AR_RTC_STATUS_SHUTDOWN) {
-			if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
-				return false;
-			}
-			if (!AR_SREV_9300_20_OR_LATER(ah))
-				ath9k_hw_init_pll(ah, NULL);
+	if ((REG_READ(ah, AR_RTC_STATUS) &
+	     AR_RTC_STATUS_M) == AR_RTC_STATUS_SHUTDOWN) {
+		if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
+			return false;
 		}
-		if (AR_SREV_9100(ah))
-			REG_SET_BIT(ah, AR_RTC_RESET,
-				    AR_RTC_RESET_EN);
+		if (!AR_SREV_9300_20_OR_LATER(ah))
+			ath9k_hw_init_pll(ah, NULL);
+	}
+	if (AR_SREV_9100(ah))
+		REG_SET_BIT(ah, AR_RTC_RESET,
+			    AR_RTC_RESET_EN);
 
+	REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
+		    AR_RTC_FORCE_WAKE_EN);
+	udelay(50);
+
+	for (i = POWER_UP_TIME / 50; i > 0; i--) {
+		val = REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M;
+		if (val == AR_RTC_STATUS_ON)
+			break;
+		udelay(50);
 		REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
 			    AR_RTC_FORCE_WAKE_EN);
-		udelay(50);
-
-		for (i = POWER_UP_TIME / 50; i > 0; i--) {
-			val = REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M;
-			if (val == AR_RTC_STATUS_ON)
-				break;
-			udelay(50);
-			REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
-				    AR_RTC_FORCE_WAKE_EN);
-		}
-		if (i == 0) {
-			ath_err(ath9k_hw_common(ah),
-				"Failed to wakeup in %uus\n",
-				POWER_UP_TIME / 20);
-			return false;
-		}
+	}
+	if (i == 0) {
+		ath_err(ath9k_hw_common(ah),
+			"Failed to wakeup in %uus\n",
+			POWER_UP_TIME / 20);
+		return false;
 	}
 
 	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
@@ -2146,7 +2141,7 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah, int setChip)
 bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
-	int status = true, setChip = true;
+	int status = true;
 	static const char *modes[] = {
 		"AWAKE",
 		"FULL-SLEEP",
@@ -2162,17 +2157,17 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 
 	switch (mode) {
 	case ATH9K_PM_AWAKE:
-		status = ath9k_hw_set_power_awake(ah, setChip);
+		status = ath9k_hw_set_power_awake(ah);
 		break;
 	case ATH9K_PM_FULL_SLEEP:
 		if (ath9k_hw_mci_is_enabled(ah))
 			ar9003_mci_set_full_sleep(ah);
 
-		ath9k_set_power_sleep(ah, setChip);
+		ath9k_set_power_sleep(ah);
 		ah->chip_fullsleep = true;
 		break;
 	case ATH9K_PM_NETWORK_SLEEP:
-		ath9k_set_power_network_sleep(ah, setChip);
+		ath9k_set_power_network_sleep(ah);
 		break;
 	default:
 		ath_err(common, "Unknown power mode %u\n", mode);