提交 3155a09f 编写于 作者: F Florian Echtler 提交者: Jiri Kosina

HID: wiimote: Parse calibration data of balance boards

The raw pressure-data that is reported by balance-boards is pretty useless
unless calibration data is applied. Therefore, we read the full
calibration data on extension initialization and apply it to every
reported data.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 5ad67fbc
......@@ -28,6 +28,7 @@ struct wiimote_ext {
bool mp_plugged;
bool motionp;
__u8 ext_type;
__u16 calib[4][3];
};
enum wiiext_type {
......@@ -127,6 +128,7 @@ static bool motionp_read(struct wiimote_ext *ext)
static __u8 ext_read(struct wiimote_ext *ext)
{
ssize_t ret;
__u8 buf[24], i, j, offs = 0;
__u8 rmem[2], wmem;
__u8 type = WIIEXT_NONE;
......@@ -156,6 +158,26 @@ static __u8 ext_read(struct wiimote_ext *ext)
type = WIIEXT_BALANCE_BOARD;
}
/* get balance board calibration data */
if (type == WIIEXT_BALANCE_BOARD) {
ret = wiimote_cmd_read(ext->wdata, 0xa40024, buf, 12);
ret += wiimote_cmd_read(ext->wdata, 0xa40024 + 12,
buf + 12, 12);
if (ret != 24) {
type = WIIEXT_NONE;
} else {
for (i = 0; i < 3; i++) {
for (j = 0; j < 4; j++) {
ext->calib[j][i] = buf[offs];
ext->calib[j][i] <<= 8;
ext->calib[j][i] |= buf[offs + 1];
offs += 2;
}
}
}
}
wiimote_cmd_release(ext->wdata);
return type;
......@@ -514,7 +536,8 @@ static void handler_classic(struct wiimote_ext *ext, const __u8 *payload)
static void handler_balance_board(struct wiimote_ext *ext, const __u8 *payload)
{
__s32 val[4];
__s32 val[4], tmp;
unsigned int i;
/* Byte | 8 7 6 5 4 3 2 1 |
* -----+--------------------------+
......@@ -553,6 +576,20 @@ static void handler_balance_board(struct wiimote_ext *ext, const __u8 *payload)
val[3] <<= 8;
val[3] |= payload[7];
/* apply calibration data */
for (i = 0; i < 4; i++) {
if (val[i] < ext->calib[i][1]) {
tmp = val[i] - ext->calib[i][0];
tmp *= 1700;
tmp /= ext->calib[i][1] - ext->calib[i][0];
} else {
tmp = val[i] - ext->calib[i][1];
tmp *= 1700;
tmp /= ext->calib[i][2] - ext->calib[i][1] + 1700;
}
val[i] = tmp;
}
input_report_abs(ext->input, ABS_HAT0X, val[0]);
input_report_abs(ext->input, ABS_HAT0Y, val[1]);
input_report_abs(ext->input, ABS_HAT1X, val[2]);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册