提交 31160006 编写于 作者: S Sonika Jindal 提交者: Daniel Vetter

drm/gma500: Renaming DP training vswing pre emph defines

Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)

...
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 0ded9254
......@@ -1089,7 +1089,7 @@ static char *link_train_names[] = {
};
#endif
#define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_1200
#define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_LEVEL_3
/*
static uint8_t
cdv_intel_dp_pre_emphasis_max(uint8_t voltage_swing)
......@@ -1276,7 +1276,7 @@ cdv_intel_dp_set_vswing_premph(struct gma_encoder *encoder, uint8_t signal_level
cdv_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]);
/* ;gfx_dpio_set_reg(0x814c, 0x40802040) */
if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_1200)
if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3)
cdv_sb_write(dev, ddi_reg->VSwing3, 0x70802040);
else
cdv_sb_write(dev, ddi_reg->VSwing3, 0x40802040);
......
......@@ -116,30 +116,30 @@ parse_edp(struct drm_psb_private *dev_priv, struct bdb_header *bdb)
switch (edp_link_params->preemphasis) {
case 0:
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_0;
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
break;
case 1:
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5;
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
break;
case 2:
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_6;
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
break;
case 3:
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5;
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
break;
}
switch (edp_link_params->vswing) {
case 0:
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_400;
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
break;
case 1:
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_600;
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
break;
case 2:
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_800;
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
break;
case 3:
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_1200;
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
break;
}
DRM_DEBUG_KMS("VBT reports EDP: VSwing %d, Preemph %d\n",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册