提交 31139971 编写于 作者: P Paul Mackerras 提交者: Linus Torvalds

[PATCH] ppc32: support hotplug cpu on powermacs

This allows cpus to be off-lined on 32-bit SMP powermacs.  When a cpu
is off-lined, it is put into sleep mode with interrupts disabled.  It
can be on-lined again by asserting its soft-reset pin, which is
connected to a GPIO pin.

With this I can off-line the second cpu in my dual G4 powermac, which
means that I can then suspend the machine (the suspend/resume code
refuses to suspend if more than one cpu is online, and making it cope
with multiple cpus is surprisingly messy).
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 bb0bb3b6
......@@ -265,6 +265,15 @@ config PPC601_SYNC_FIX
If in doubt, say Y here.
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && HOTPLUG && EXPERIMENTAL && PPC_PMAC
---help---
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
Say N if you are unsure.
source arch/ppc/platforms/4xx/Kconfig
source arch/ppc/platforms/85xx/Kconfig
......
......@@ -1023,23 +1023,21 @@ __secondary_start_gemini:
andc r4,r4,r3
mtspr SPRN_HID0,r4
sync
bl gemini_prom_init
b __secondary_start
#endif /* CONFIG_GEMINI */
.globl __secondary_start_psurge
__secondary_start_psurge:
li r24,1 /* cpu # */
b __secondary_start_psurge99
.globl __secondary_start_psurge2
__secondary_start_psurge2:
li r24,2 /* cpu # */
b __secondary_start_psurge99
.globl __secondary_start_psurge3
__secondary_start_psurge3:
li r24,3 /* cpu # */
b __secondary_start_psurge99
__secondary_start_psurge99:
/* we come in here with IR=0 and DR=1, and DBAT 0
.globl __secondary_start_pmac_0
__secondary_start_pmac_0:
/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
li r24,0
b 1f
li r24,1
b 1f
li r24,2
b 1f
li r24,3
1:
/* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
set to map the 0xf0000000 - 0xffffffff region */
mfmsr r0
rlwinm r0,r0,0,28,26 /* clear DR (0x10) */
......
......@@ -22,6 +22,7 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/cpu.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
......@@ -35,6 +36,7 @@
void default_idle(void)
{
void (*powersave)(void);
int cpu = smp_processor_id();
powersave = ppc_md.power_save;
......@@ -44,7 +46,7 @@ void default_idle(void)
#ifdef CONFIG_SMP
else {
set_thread_flag(TIF_POLLING_NRFLAG);
while (!need_resched())
while (!need_resched() && !cpu_is_offline(cpu))
barrier();
clear_thread_flag(TIF_POLLING_NRFLAG);
}
......@@ -52,6 +54,8 @@ void default_idle(void)
}
if (need_resched())
schedule();
if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
cpu_die();
}
/*
......
......@@ -45,6 +45,7 @@ cpumask_t cpu_online_map;
cpumask_t cpu_possible_map;
int smp_hw_index[NR_CPUS];
struct thread_info *secondary_ti;
static struct task_struct *idle_tasks[NR_CPUS];
EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(cpu_possible_map);
......@@ -286,7 +287,8 @@ static void __devinit smp_store_cpu_info(int id)
void __init smp_prepare_cpus(unsigned int max_cpus)
{
int num_cpus, i;
int num_cpus, i, cpu;
struct task_struct *p;
/* Fixup boot cpu */
smp_store_cpu_info(smp_processor_id());
......@@ -308,6 +310,17 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
if (smp_ops->space_timers)
smp_ops->space_timers(num_cpus);
for_each_cpu(cpu) {
if (cpu == smp_processor_id())
continue;
/* create a process for the processor */
p = fork_idle(cpu);
if (IS_ERR(p))
panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
p->thread_info->cpu = cpu;
idle_tasks[cpu] = p;
}
}
void __devinit smp_prepare_boot_cpu(void)
......@@ -334,12 +347,17 @@ int __devinit start_secondary(void *unused)
set_dec(tb_ticks_per_jiffy);
cpu_callin_map[cpu] = 1;
printk("CPU %i done callin...\n", cpu);
printk("CPU %d done callin...\n", cpu);
smp_ops->setup_cpu(cpu);
printk("CPU %i done setup...\n", cpu);
local_irq_enable();
printk("CPU %d done setup...\n", cpu);
smp_ops->take_timebase();
printk("CPU %i done timebase take...\n", cpu);
printk("CPU %d done timebase take...\n", cpu);
spin_lock(&call_lock);
cpu_set(cpu, cpu_online_map);
spin_unlock(&call_lock);
local_irq_enable();
cpu_idle();
return 0;
......@@ -347,17 +365,11 @@ int __devinit start_secondary(void *unused)
int __cpu_up(unsigned int cpu)
{
struct task_struct *p;
char buf[32];
int c;
/* create a process for the processor */
/* only regs.msr is actually used, and 0 is OK for it */
p = fork_idle(cpu);
if (IS_ERR(p))
panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
secondary_ti = p->thread_info;
p->thread_info->cpu = cpu;
secondary_ti = idle_tasks[cpu]->thread_info;
mb();
/*
* There was a cache flush loop here to flush the cache
......@@ -389,7 +401,11 @@ int __cpu_up(unsigned int cpu)
printk("Processor %d found.\n", cpu);
smp_ops->give_timebase();
cpu_set(cpu, cpu_online_map);
/* Wait until cpu puts itself in the online map */
while (!cpu_online(cpu))
cpu_relax();
return 0;
}
......
......@@ -161,6 +161,8 @@ _GLOBAL(low_sleep_handler)
addi r3,r3,sleep_storage@l
stw r5,0(r3)
.globl low_cpu_die
low_cpu_die:
/* Flush & disable all caches */
bl flush_disable_caches
......
......@@ -33,6 +33,7 @@
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/hardirq.h>
#include <linux/cpu.h>
#include <asm/ptrace.h>
#include <asm/atomic.h>
......@@ -55,9 +56,7 @@
* Powersurge (old powermac SMP) support.
*/
extern void __secondary_start_psurge(void);
extern void __secondary_start_psurge2(void); /* Temporary horrible hack */
extern void __secondary_start_psurge3(void); /* Temporary horrible hack */
extern void __secondary_start_pmac_0(void);
/* Addresses for powersurge registers */
#define HAMMERHEAD_BASE 0xf8000000
......@@ -119,7 +118,7 @@ static volatile int sec_tb_reset = 0;
static unsigned int pri_tb_hi, pri_tb_lo;
static unsigned int pri_tb_stamp;
static void __init core99_init_caches(int cpu)
static void __devinit core99_init_caches(int cpu)
{
if (!cpu_has_feature(CPU_FTR_L2CR))
return;
......@@ -346,7 +345,7 @@ static int __init smp_psurge_probe(void)
static void __init smp_psurge_kick_cpu(int nr)
{
void (*start)(void) = __secondary_start_psurge;
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
unsigned long a;
/* may need to flush here if secondary bats aren't setup */
......@@ -356,17 +355,7 @@ static void __init smp_psurge_kick_cpu(int nr)
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
/* setup entry point of secondary processor */
switch (nr) {
case 2:
start = __secondary_start_psurge2;
break;
case 3:
start = __secondary_start_psurge3;
break;
}
out_be32(psurge_start, __pa(start));
out_be32(psurge_start, start);
mb();
psurge_set_ipi(nr);
......@@ -500,14 +489,14 @@ static int __init smp_core99_probe(void)
return ncpus;
}
static void __init smp_core99_kick_cpu(int nr)
static void __devinit smp_core99_kick_cpu(int nr)
{
unsigned long save_vector, new_vector;
unsigned long flags;
volatile unsigned long *vector
= ((volatile unsigned long *)(KERNELBASE+0x100));
if (nr < 1 || nr > 3)
if (nr < 0 || nr > 3)
return;
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
......@@ -518,19 +507,9 @@ static void __init smp_core99_kick_cpu(int nr)
save_vector = *vector;
/* Setup fake reset vector that does
* b __secondary_start_psurge - KERNELBASE
* b __secondary_start_pmac_0 + nr*8 - KERNELBASE
*/
switch(nr) {
case 1:
new_vector = (unsigned long)__secondary_start_psurge;
break;
case 2:
new_vector = (unsigned long)__secondary_start_psurge2;
break;
case 3:
new_vector = (unsigned long)__secondary_start_psurge3;
break;
}
new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8;
*vector = 0x48000002 + new_vector - KERNELBASE;
/* flush data cache and inval instruction cache */
......@@ -554,7 +533,7 @@ static void __init smp_core99_kick_cpu(int nr)
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
}
static void __init smp_core99_setup_cpu(int cpu_nr)
static void __devinit smp_core99_setup_cpu(int cpu_nr)
{
/* Setup L2/L3 */
if (cpu_nr != 0)
......@@ -668,3 +647,47 @@ struct smp_ops_t core99_smp_ops __pmacdata = {
.give_timebase = smp_core99_give_timebase,
.take_timebase = smp_core99_take_timebase,
};
#ifdef CONFIG_HOTPLUG_CPU
int __cpu_disable(void)
{
cpu_clear(smp_processor_id(), cpu_online_map);
/* XXX reset cpu affinity here */
openpic_set_priority(0xf);
asm volatile("mtdec %0" : : "r" (0x7fffffff));
mb();
udelay(20);
asm volatile("mtdec %0" : : "r" (0x7fffffff));
return 0;
}
extern void low_cpu_die(void) __attribute__((noreturn)); /* in pmac_sleep.S */
static int cpu_dead[NR_CPUS];
void cpu_die(void)
{
local_irq_disable();
cpu_dead[smp_processor_id()] = 1;
mb();
low_cpu_die();
}
void __cpu_die(unsigned int cpu)
{
int timeout;
timeout = 1000;
while (!cpu_dead[cpu]) {
if (--timeout == 0) {
printk("CPU %u refused to die!\n", cpu);
break;
}
msleep(1);
}
cpu_callin_map[cpu] = 0;
cpu_dead[cpu] = 0;
}
#endif
......@@ -41,6 +41,10 @@ extern void smp_send_xmon_break(int cpu);
struct pt_regs;
extern void smp_message_recv(int, struct pt_regs *);
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
extern void cpu_die(void) __attribute__((noreturn));
#define NO_PROC_ID 0xFF /* No processor magic marker */
#define PROC_CHANGE_PENALTY 20
......@@ -64,6 +68,8 @@ extern struct klock_info_struct klock_info;
#else /* !(CONFIG_SMP) */
static inline void cpu_die(void) { }
#endif /* !(CONFIG_SMP) */
#endif /* !(_PPC_SMP_H) */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册