提交 2fd02375 编写于 作者: D Daniel Wolstenholme 提交者: Russell King

[ARM] iop13xx: msi support

Enable devices to signal interrupts via PCI memory cycles.

rev6:
* fix enable/disable typo, Michael Ellerman

rev5:
* fix up ack, enable, and disable for iop13xx_msi_chip

rev4:
* move smp compile fix to separate patch
* use dynamic_irq_init in create_irq()
* hookup mask/unmask routines in iop13xx_msi_chip

rev3:
* change msi.c to use linux/smp.h instead of asm/smp.h
* call dynamic_irq_cleanup at destroy_irq time

rev2:
* destroy_irq did not take the full 128 bits of msi_irq_in_use into account
* added missing '&' for calls to test_and_set_bit and clear_bit

[ebiederm@xmission.com: review comments/suggestions]
[dan.j.williams@intel.com: cleanups/forward port to 2.6-git]
Signed-off-by: NDaniel Wolstenholme <daniel.e.wolstenholme@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 87b247c4
......@@ -10,3 +10,4 @@ obj-$(CONFIG_ARCH_IOP13XX) += io.o
obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o
obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
obj-$(CONFIG_PCI_MSI) += msi.o
......@@ -26,6 +26,7 @@
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
#include <asm/arch/msi.h>
/* INTCTL0 CP6 R0 Page 4
*/
......@@ -258,7 +259,7 @@ void __init iop13xx_init_irq(void)
write_intbase(INTBASE);
write_intsize(INTSIZE_4);
for(i = 0; i < NR_IOP13XX_IRQS; i++) {
for(i = 0; i <= IRQ_IOP13XX_HPI; i++) {
if (i < 32)
set_irq_chip(i, &iop13xx_irqchip1);
else if (i < 64)
......@@ -271,4 +272,6 @@ void __init iop13xx_init_irq(void)
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
iop13xx_msi_init();
}
/*
* arch/arm/mach-iop13xx/msi.c
*
* PCI MSI support for the iop13xx processor
*
* Copyright (c) 2006, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59 Temple
* Place - Suite 330, Boston, MA 02111-1307 USA.
*
*/
#include <linux/pci.h>
#include <linux/msi.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
#define IOP13XX_NUM_MSI_IRQS 128
static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
/* IMIPR0 CP6 R8 Page 1
*/
static inline u32 read_imipr_0(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val));
return val;
}
static inline void write_imipr_0(u32 val)
{
asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val));
}
/* IMIPR1 CP6 R9 Page 1
*/
static inline u32 read_imipr_1(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val));
return val;
}
static inline void write_imipr_1(u32 val)
{
asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val));
}
/* IMIPR2 CP6 R10 Page 1
*/
static inline u32 read_imipr_2(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val));
return val;
}
static inline void write_imipr_2(u32 val)
{
asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val));
}
/* IMIPR3 CP6 R11 Page 1
*/
static inline u32 read_imipr_3(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val));
return val;
}
static inline void write_imipr_3(u32 val)
{
asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val));
}
static u32 (*read_imipr[])(void) = {
read_imipr_0,
read_imipr_1,
read_imipr_2,
read_imipr_3,
};
static void (*write_imipr[])(u32) = {
write_imipr_0,
write_imipr_1,
write_imipr_2,
write_imipr_3,
};
static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
{
int i, j;
unsigned long status;
/* read IMIPR registers and find any active interrupts,
* then call ISR for each active interrupt
*/
for (i = 0; i < ARRAY_SIZE(read_imipr); i++) {
status = (read_imipr[i])();
if (!status)
continue;
do {
j = find_first_bit(&status, 32);
(write_imipr[i])(1 << j); /* write back to clear bit */
desc = irq_desc + IRQ_IOP13XX_MSI_0 + j + (32*i);
desc_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i), desc);
status = (read_imipr[i])();
} while (status);
}
}
void __init iop13xx_msi_init(void)
{
set_irq_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler);
}
/*
* Dynamic irq allocate and deallocation
*/
int create_irq(void)
{
int irq, pos;
again:
pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
irq = IRQ_IOP13XX_MSI_0 + pos;
if (irq > NR_IRQS)
return -ENOSPC;
/* test_and_set_bit operates on 32-bits at a time */
if (test_and_set_bit(pos, msi_irq_in_use))
goto again;
dynamic_irq_init(irq);
return irq;
}
void destroy_irq(unsigned int irq)
{
int pos = irq - IRQ_IOP13XX_MSI_0;
dynamic_irq_cleanup(irq);
clear_bit(pos, msi_irq_in_use);
}
void arch_teardown_msi_irq(unsigned int irq)
{
destroy_irq(irq);
}
static void iop13xx_msi_nop(unsigned int irq)
{
return;
}
static struct irq_chip iop13xx_msi_chip = {
.name = "PCI-MSI",
.ack = iop13xx_msi_nop,
.enable = unmask_msi_irq,
.disable = mask_msi_irq,
.mask = mask_msi_irq,
.unmask = unmask_msi_irq,
};
int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
{
int id, irq = create_irq();
struct msi_msg msg;
if (irq < 0)
return irq;
set_irq_msi(irq, desc);
msg.address_hi = 0x0;
msg.address_lo = IOP13XX_MU_MIMR_PCI;
id = iop13xx_cpu_id();
msg.data = (id << IOP13XX_MU_MIMR_CORE_SELECT) | (irq & 0x7f);
write_msi_msg(irq, &msg);
set_irq_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq);
return irq;
}
......@@ -559,6 +559,14 @@ void __init iop13xx_atue_setup(void)
int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
u32 reg_val;
#ifdef CONFIG_PCI_MSI
/* BAR 0 (inbound msi window) */
__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
__raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
__raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
#endif
/* BAR 1 (1:1 mapping with Physical RAM) */
/* Set limit and enable */
__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
......@@ -720,6 +728,14 @@ void __init iop13xx_atux_setup(void)
else
atux_trhfa_timeout = jiffies;
#ifdef CONFIG_PCI_MSI
/* BAR 0 (inbound msi window) */
__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
__raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
__raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
#endif
/* BAR 1 (1:1 mapping with Physical RAM) */
/* Set limit and enable */
__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
......
......@@ -181,6 +181,7 @@ static inline int iop13xx_cpu_id(void)
#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200
#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400
#define IOP13XX_PBI_PMMR_OFFSET 0x00001580
#define IOP13XX_MU_PMMR_OFFSET 0x00004000
#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188
#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188)
......@@ -412,6 +413,34 @@ static inline int iop13xx_cpu_id(void)
#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7)
/*=======================================================================*/
/*============================MESSAGING UNIT=============================*/
#define IOP13XX_MU_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
(ofs))
#define IOP13XX_MU_IMR0 IOP13XX_MU_OFFSET(0x10)
#define IOP13XX_MU_IMR1 IOP13XX_MU_OFFSET(0x14)
#define IOP13XX_MU_OMR0 IOP13XX_MU_OFFSET(0x18)
#define IOP13XX_MU_OMR1 IOP13XX_MU_OFFSET(0x1C)
#define IOP13XX_MU_IDR IOP13XX_MU_OFFSET(0x20)
#define IOP13XX_MU_IISR IOP13XX_MU_OFFSET(0x24)
#define IOP13XX_MU_IIMR IOP13XX_MU_OFFSET(0x28)
#define IOP13XX_MU_ODR IOP13XX_MU_OFFSET(0x2C)
#define IOP13XX_MU_OISR IOP13XX_MU_OFFSET(0x30)
#define IOP13XX_MU_OIMR IOP13XX_MU_OFFSET(0x34)
#define IOP13XX_MU_IRCSR IOP13XX_MU_OFFSET(0x38)
#define IOP13XX_MU_ORCSR IOP13XX_MU_OFFSET(0x3C)
#define IOP13XX_MU_MIMR IOP13XX_MU_OFFSET(0x48)
#define IOP13XX_MU_MUCR IOP13XX_MU_OFFSET(0x50)
#define IOP13XX_MU_QBAR IOP13XX_MU_OFFSET(0x54)
#define IOP13XX_MU_MUBAR IOP13XX_MU_OFFSET(0x84)
#define IOP13XX_MU_WINDOW_SIZE (8 * 1024)
#define IOP13XX_MU_BASE_PHYS (0xff000000)
#define IOP13XX_MU_BASE_PCI (0xff000000)
#define IOP13XX_MU_MIMR_PCI (IOP13XX_MU_BASE_PCI + 0x48)
#define IOP13XX_MU_MIMR_CORE_SELECT (15)
/*=======================================================================*/
/*==============================ADMA UNITS===============================*/
#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9))
#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
......
......@@ -168,7 +168,7 @@ static inline u32 read_intpnd_3(void)
#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */
#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */
#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */
#define IRQ_IOP13XX_RSVD_113 (113) /* 17 */
#define IRQ_IOP13XX_INBD_MSI (113) /* 17 */
#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */
#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */
#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */
......@@ -184,7 +184,13 @@ static inline u32 read_intpnd_3(void)
#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */
#define IRQ_IOP13XX_HPI (127) /* 31 */
#ifdef CONFIG_PCI_MSI
#define IRQ_IOP13XX_MSI_0 (IRQ_IOP13XX_HPI + 1)
#define NR_IOP13XX_IRQS (IRQ_IOP13XX_MSI_0 + 128)
#else
#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1)
#endif
#define NR_IRQS NR_IOP13XX_IRQS
#endif /* _IOP13XX_IRQ_H_ */
#ifndef _IOP13XX_MSI_H_
#define _IOP13XX_MSI_H_
#ifdef CONFIG_PCI_MSI
void iop13xx_msi_init(void);
#else
static inline void iop13xx_msi_init(void)
{
return;
}
#endif
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册