arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable

ICC_SRE_EL1 is a system register allowing msr/mrs accesses to the
GIC CPU interface for EL1 (guests). Currently we force it to 0, but
for proper GICv3 support we have to allow guests to use it (depending
on their selected virtual GIC model).
So add ICC_SRE_EL1 to the list of saved/restored registers on a
world switch, but actually disallow a guest to change it by only
restoring a fixed, once-initialized value.
This value depends on the GIC model userland has chosen for a guest.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

arch/arm64/kernel/asm-offsets.c

@@ -140,6 +140,7 @@ int main(void)
   DEFINE(VGIC_V2_CPU_ELRSR,	offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr));
   DEFINE(VGIC_V2_CPU_APR,	offsetof(struct vgic_cpu, vgic_v2.vgic_apr));
   DEFINE(VGIC_V2_CPU_LR,	offsetof(struct vgic_cpu, vgic_v2.vgic_lr));
+  DEFINE(VGIC_V3_CPU_SRE,	offsetof(struct vgic_cpu, vgic_v3.vgic_sre));
   DEFINE(VGIC_V3_CPU_HCR,	offsetof(struct vgic_cpu, vgic_v3.vgic_hcr));
   DEFINE(VGIC_V3_CPU_VMCR,	offsetof(struct vgic_cpu, vgic_v3.vgic_vmcr));
   DEFINE(VGIC_V3_CPU_MISR,	offsetof(struct vgic_cpu, vgic_v3.vgic_misr));

arch/arm64/kvm/vgic-v3-switch.S

@@ -148,17 +148,18 @@
  * x0: Register pointing to VCPU struct
  */
 .macro	restore_vgic_v3_state
-	// Disable SRE_EL1 access. Necessary, otherwise
-	// ICH_VMCR_EL2.VFIQEn becomes one, and FIQ happens...
-	msr_s	ICC_SRE_EL1, xzr
-	isb
-
 	// Compute the address of struct vgic_cpu
 	add	x3, x0, #VCPU_VGIC_CPU
 
 	// Restore all interesting registers
 	ldr	w4, [x3, #VGIC_V3_CPU_HCR]
 	ldr	w5, [x3, #VGIC_V3_CPU_VMCR]
+	ldr	w25, [x3, #VGIC_V3_CPU_SRE]
+
+	msr_s	ICC_SRE_EL1, x25
+
+	// make sure SRE is valid before writing the other registers
+	isb
 
 	msr_s	ICH_HCR_EL2, x4
 	msr_s	ICH_VMCR_EL2, x5
@@ -244,9 +245,12 @@
 	dsb	sy
 
 	// Prevent the guest from touching the GIC system registers
+	// if SRE isn't enabled for GICv3 emulation
+	cbnz	x25, 1f
 	mrs_s	x5, ICC_SRE_EL2
 	and	x5, x5, #~ICC_SRE_EL2_ENABLE
 	msr_s	ICC_SRE_EL2, x5
+1:
 .endm
 
 ENTRY(__save_vgic_v3_state)

include/kvm/arm_vgic.h

@@ -245,6 +245,7 @@ struct vgic_v3_cpu_if {
 #ifdef CONFIG_ARM_GIC_V3
 	u32		vgic_hcr;
 	u32		vgic_vmcr;
+	u32		vgic_sre;	/* Restored only, change ignored */
 	u32		vgic_misr;	/* Saved only */
 	u32		vgic_eisr;	/* Saved only */
 	u32		vgic_elrsr;	/* Saved only */

virt/kvm/arm/vgic-v3.c

@@ -145,15 +145,19 @@ static void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
 
 static void vgic_v3_enable(struct kvm_vcpu *vcpu)
 {
+	struct vgic_v3_cpu_if *vgic_v3 = &vcpu->arch.vgic_cpu.vgic_v3;
+
 	/*
 	 * By forcing VMCR to zero, the GIC will restore the binary
 	 * points to their reset values. Anything else resets to zero
 	 * anyway.
 	 */
-	vcpu->arch.vgic_cpu.vgic_v3.vgic_vmcr = 0;
+	vgic_v3->vgic_vmcr = 0;
+
+	vgic_v3->vgic_sre = 0;
 
 	/* Get the show on the road... */
-	vcpu->arch.vgic_cpu.vgic_v3.vgic_hcr = ICH_HCR_EN;
+	vgic_v3->vgic_hcr = ICH_HCR_EN;
 }
 
 static const struct vgic_ops vgic_v3_ops = {