Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED subsystem update from Bryan Wu:
 "We got some cleanup and driver for LP8860 as well as some patches for
  LED Flash Class"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: lp8860: Fix module dependency
  leds: lp8860: Introduce TI lp8860 4 channel LED driver
  leds: Add support for setting brightness in a synchronous way
  leds: implement sysfs interface locking mechanism
  leds: syscon: handle multiple syscon instances
  leds: delete copy/paste mistake
  leds: regulator: Convert to devm_regulator_get_exclusive

Documentation/devicetree/bindings/leds/leds-lp8860.txt

+* Texas Instruments - lp8860 4-Channel LED Driver
+
+The LP8860-Q1 is an high-efficiency LED
+driver with boost controller. It has 4 high-precision
+current sinks that can be controlled by a PWM input
+signal, a SPI/I2C master, or both.
+
+Required properties:
+	- compatible:
+		"ti,lp8860"
+	- reg -  I2C slave address
+	- label - Used for naming LEDs
+
+Optional properties:
+	- enable-gpio - gpio pin to enable/disable the device.
+	- supply - "vled" - LED supply
+
+Example:
+
+leds: leds@6 {
+	compatible = "ti,lp8860";
+	reg = <0x2d>;
+	label = "display_cluster";
+	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vbatt>;
+}
+
+For more product information please see the link below:
+http://www.ti.com/product/lp8860-q1

drivers/leds/Kconfig

@@ -250,6 +250,17 @@ config LEDS_LP8788
 	help
 	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.
 
+config LEDS_LP8860
+	tristate "LED support for the TI LP8860 4 channel LED driver"
+	depends on LEDS_CLASS && I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the TI LP8860 4 channel
+	  LED driver.
+	  This option enables support for the display cluster LEDs
+	  on the LP8860 4 channel LED driver using the I2C communication
+	  bus.
+
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
 	depends on LEDS_CLASS

drivers/leds/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
 obj-$(CONFIG_LEDS_LP5562)		+= leds-lp5562.o
 obj-$(CONFIG_LEDS_LP8501)		+= leds-lp8501.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
+obj-$(CONFIG_LEDS_LP8860)		+= leds-lp8860.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o

drivers/leds/led-class.c

@@ -40,17 +40,27 @@ static ssize_t brightness_store(struct device *dev,
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
 	unsigned long state;
-	ssize_t ret = -EINVAL;
+	ssize_t ret;
+
+	mutex_lock(&led_cdev->led_access);
+
+	if (led_sysfs_is_disabled(led_cdev)) {
+		ret = -EBUSY;
+		goto unlock;
+	}
 
 	ret = kstrtoul(buf, 10, &state);
 	if (ret)
-		return ret;
+		goto unlock;
 
 	if (state == LED_OFF)
 		led_trigger_remove(led_cdev);
-	__led_set_brightness(led_cdev, state);
+	led_set_brightness(led_cdev, state);
 
-	return size;
+	ret = size;
+unlock:
+	mutex_unlock(&led_cdev->led_access);
+	return ret;
 }
 static DEVICE_ATTR_RW(brightness);
 
@@ -99,7 +109,7 @@ static void led_timer_function(unsigned long data)
 	unsigned long delay;
 
 	if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
-		__led_set_brightness(led_cdev, LED_OFF);
+		led_set_brightness_async(led_cdev, LED_OFF);
 		return;
 	}
 
@@ -122,7 +132,7 @@ static void led_timer_function(unsigned long data)
 		delay = led_cdev->blink_delay_off;
 	}
 
-	__led_set_brightness(led_cdev, brightness);
+	led_set_brightness_async(led_cdev, brightness);
 
 	/* Return in next iteration if led is in one-shot mode and we are in
 	 * the final blink state so that the led is toggled each delay_on +
@@ -148,7 +158,7 @@ static void set_brightness_delayed(struct work_struct *ws)
 
 	led_stop_software_blink(led_cdev);
 
-	__led_set_brightness(led_cdev, led_cdev->delayed_set_value);
+	led_set_brightness_async(led_cdev, led_cdev->delayed_set_value);
 }
 
 /**
@@ -214,6 +224,7 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 #ifdef CONFIG_LEDS_TRIGGERS
 	init_rwsem(&led_cdev->trigger_lock);
 #endif
+	mutex_init(&led_cdev->led_access);
 	/* add to the list of leds */
 	down_write(&leds_list_lock);
 	list_add_tail(&led_cdev->node, &leds_list);
@@ -222,6 +233,8 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 	if (!led_cdev->max_brightness)
 		led_cdev->max_brightness = LED_FULL;
 
+	led_cdev->flags |= SET_BRIGHTNESS_ASYNC;
+
 	led_update_brightness(led_cdev);
 
 	INIT_WORK(&led_cdev->set_brightness_work, set_brightness_delayed);
@@ -267,6 +280,8 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 	down_write(&leds_list_lock);
 	list_del(&led_cdev->node);
 	up_write(&leds_list_lock);
+
+	mutex_destroy(&led_cdev->led_access);
 }
 EXPORT_SYMBOL_GPL(led_classdev_unregister);
 

drivers/leds/led-core.c

@@ -42,13 +42,13 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 
 	/* never on - just set to off */
 	if (!delay_on) {
-		__led_set_brightness(led_cdev, LED_OFF);
+		led_set_brightness_async(led_cdev, LED_OFF);
 		return;
 	}
 
 	/* never off - just set to brightness */
 	if (!delay_off) {
-		__led_set_brightness(led_cdev, led_cdev->blink_brightness);
+		led_set_brightness_async(led_cdev, led_cdev->blink_brightness);
 		return;
 	}
 
@@ -117,6 +117,8 @@ EXPORT_SYMBOL_GPL(led_stop_software_blink);
 void led_set_brightness(struct led_classdev *led_cdev,
 			enum led_brightness brightness)
 {
+	int ret = 0;
+
 	/* delay brightness setting if need to stop soft-blink timer */
 	if (led_cdev->blink_delay_on || led_cdev->blink_delay_off) {
 		led_cdev->delayed_set_value = brightness;
@@ -124,7 +126,17 @@ void led_set_brightness(struct led_classdev *led_cdev,
 		return;
 	}
 
-	__led_set_brightness(led_cdev, brightness);
+	if (led_cdev->flags & SET_BRIGHTNESS_ASYNC) {
+		led_set_brightness_async(led_cdev, brightness);
+		return;
+	} else if (led_cdev->flags & SET_BRIGHTNESS_SYNC)
+		ret = led_set_brightness_sync(led_cdev, brightness);
+	else
+		ret = -EINVAL;
+
+	if (ret < 0)
+		dev_dbg(led_cdev->dev, "Setting LED brightness failed (%d)\n",
+			ret);
 }
 EXPORT_SYMBOL(led_set_brightness);
 
@@ -143,3 +155,21 @@ int led_update_brightness(struct led_classdev *led_cdev)
 	return ret;
 }
 EXPORT_SYMBOL(led_update_brightness);
+
+/* Caller must ensure led_cdev->led_access held */
+void led_sysfs_disable(struct led_classdev *led_cdev)
+{
+	lockdep_assert_held(&led_cdev->led_access);
+
+	led_cdev->flags |= LED_SYSFS_DISABLE;
+}
+EXPORT_SYMBOL_GPL(led_sysfs_disable);
+
+/* Caller must ensure led_cdev->led_access held */
+void led_sysfs_enable(struct led_classdev *led_cdev)
+{
+	lockdep_assert_held(&led_cdev->led_access);
+
+	led_cdev->flags &= ~LED_SYSFS_DISABLE;
+}
+EXPORT_SYMBOL_GPL(led_sysfs_enable);

drivers/leds/led-triggers.c

@@ -37,6 +37,14 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
 	char trigger_name[TRIG_NAME_MAX];
 	struct led_trigger *trig;
 	size_t len;
+	int ret = count;
+
+	mutex_lock(&led_cdev->led_access);
+
+	if (led_sysfs_is_disabled(led_cdev)) {
+		ret = -EBUSY;
+		goto unlock;
+	}
 
 	trigger_name[sizeof(trigger_name) - 1] = '\0';
 	strncpy(trigger_name, buf, sizeof(trigger_name) - 1);
@@ -47,7 +55,7 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
 
 	if (!strcmp(trigger_name, "none")) {
 		led_trigger_remove(led_cdev);
-		return count;
+		goto unlock;
 	}
 
 	down_read(&triggers_list_lock);
@@ -58,12 +66,14 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
 			up_write(&led_cdev->trigger_lock);
 
 			up_read(&triggers_list_lock);
-			return count;
+			goto unlock;
 		}
 	}
 	up_read(&triggers_list_lock);
 
-	return -EINVAL;
+unlock:
+	mutex_unlock(&led_cdev->led_access);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(led_trigger_store);
 

drivers/leds/leds-lp8860.c

+/*
+ * TI LP8860 4-Channel LED Driver
+ *
+ * Copyright (C) 2014 Texas Instruments
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+
+#define LP8860_DISP_CL1_BRT_MSB		0x00
+#define LP8860_DISP_CL1_BRT_LSB		0x01
+#define LP8860_DISP_CL1_CURR_MSB	0x02
+#define LP8860_DISP_CL1_CURR_LSB	0x03
+#define LP8860_CL2_BRT_MSB		0x04
+#define LP8860_CL2_BRT_LSB		0x05
+#define LP8860_CL2_CURRENT		0x06
+#define LP8860_CL3_BRT_MSB		0x07
+#define LP8860_CL3_BRT_LSB		0x08
+#define LP8860_CL3_CURRENT		0x09
+#define LP8860_CL4_BRT_MSB		0x0a
+#define LP8860_CL4_BRT_LSB		0x0b
+#define LP8860_CL4_CURRENT		0x0c
+#define LP8860_CONFIG			0x0d
+#define LP8860_STATUS			0x0e
+#define LP8860_FAULT			0x0f
+#define LP8860_LED_FAULT		0x10
+#define LP8860_FAULT_CLEAR		0x11
+#define LP8860_ID			0x12
+#define LP8860_TEMP_MSB			0x13
+#define LP8860_TEMP_LSB			0x14
+#define LP8860_DISP_LED_CURR_MSB	0x15
+#define LP8860_DISP_LED_CURR_LSB	0x16
+#define LP8860_DISP_LED_PWM_MSB		0x17
+#define LP8860_DISP_LED_PWM_LSB		0x18
+#define LP8860_EEPROM_CNTRL		0x19
+#define LP8860_EEPROM_UNLOCK		0x1a
+
+#define LP8860_EEPROM_REG_0		0x60
+#define LP8860_EEPROM_REG_1		0x61
+#define LP8860_EEPROM_REG_2		0x62
+#define LP8860_EEPROM_REG_3		0x63
+#define LP8860_EEPROM_REG_4		0x64
+#define LP8860_EEPROM_REG_5		0x65
+#define LP8860_EEPROM_REG_6		0x66
+#define LP8860_EEPROM_REG_7		0x67
+#define LP8860_EEPROM_REG_8		0x68
+#define LP8860_EEPROM_REG_9		0x69
+#define LP8860_EEPROM_REG_10		0x6a
+#define LP8860_EEPROM_REG_11		0x6b
+#define LP8860_EEPROM_REG_12		0x6c
+#define LP8860_EEPROM_REG_13		0x6d
+#define LP8860_EEPROM_REG_14		0x6e
+#define LP8860_EEPROM_REG_15		0x6f
+#define LP8860_EEPROM_REG_16		0x70
+#define LP8860_EEPROM_REG_17		0x71
+#define LP8860_EEPROM_REG_18		0x72
+#define LP8860_EEPROM_REG_19		0x73
+#define LP8860_EEPROM_REG_20		0x74
+#define LP8860_EEPROM_REG_21		0x75
+#define LP8860_EEPROM_REG_22		0x76
+#define LP8860_EEPROM_REG_23		0x77
+#define LP8860_EEPROM_REG_24		0x78
+
+#define LP8860_LOCK_EEPROM		0x00
+#define LP8860_UNLOCK_EEPROM		0x01
+#define LP8860_PROGRAM_EEPROM		0x02
+#define LP8860_EEPROM_CODE_1		0x08
+#define LP8860_EEPROM_CODE_2		0xba
+#define LP8860_EEPROM_CODE_3		0xef
+
+#define LP8860_CLEAR_FAULTS		0x01
+
+#define LP8860_DISP_LED_NAME		"display_cluster"
+
+/**
+ * struct lp8860_led -
+ * @lock - Lock for reading/writing the device
+ * @work - Work item used to off load the brightness register writes
+ * @client - Pointer to the I2C client
+ * @led_dev - led class device pointer
+ * @regmap - Devices register map
+ * @eeprom_regmap - EEPROM register map
+ * @enable_gpio - VDDIO/EN gpio to enable communication interface
+ * @regulator - LED supply regulator pointer
+ * @brightness - Current brightness value requested
+ * @label - LED label
+**/
+struct lp8860_led {
+	struct mutex lock;
+	struct work_struct work;
+	struct i2c_client *client;
+	struct led_classdev led_dev;
+	struct regmap *regmap;
+	struct regmap *eeprom_regmap;
+	struct gpio_desc *enable_gpio;
+	struct regulator *regulator;
+	enum led_brightness brightness;
+	const char *label;
+};
+
+struct lp8860_eeprom_reg {
+	uint8_t reg;
+	uint8_t value;
+};
+
+static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
+	{ LP8860_EEPROM_REG_0, 0xed },
+	{ LP8860_EEPROM_REG_1, 0xdf },
+	{ LP8860_EEPROM_REG_2, 0xdc },
+	{ LP8860_EEPROM_REG_3, 0xf0 },
+	{ LP8860_EEPROM_REG_4, 0xdf },
+	{ LP8860_EEPROM_REG_5, 0xe5 },
+	{ LP8860_EEPROM_REG_6, 0xf2 },
+	{ LP8860_EEPROM_REG_7, 0x77 },
+	{ LP8860_EEPROM_REG_8, 0x77 },
+	{ LP8860_EEPROM_REG_9, 0x71 },
+	{ LP8860_EEPROM_REG_10, 0x3f },
+	{ LP8860_EEPROM_REG_11, 0xb7 },
+	{ LP8860_EEPROM_REG_12, 0x17 },
+	{ LP8860_EEPROM_REG_13, 0xef },
+	{ LP8860_EEPROM_REG_14, 0xb0 },
+	{ LP8860_EEPROM_REG_15, 0x87 },
+	{ LP8860_EEPROM_REG_16, 0xce },
+	{ LP8860_EEPROM_REG_17, 0x72 },
+	{ LP8860_EEPROM_REG_18, 0xe5 },
+	{ LP8860_EEPROM_REG_19, 0xdf },
+	{ LP8860_EEPROM_REG_20, 0x35 },
+	{ LP8860_EEPROM_REG_21, 0x06 },
+	{ LP8860_EEPROM_REG_22, 0xdc },
+	{ LP8860_EEPROM_REG_23, 0x88 },
+	{ LP8860_EEPROM_REG_24, 0x3E },
+};
+
+static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
+{
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	if (lock == LP8860_UNLOCK_EEPROM) {
+		ret = regmap_write(led->regmap,
+			LP8860_EEPROM_UNLOCK,
+			LP8860_EEPROM_CODE_1);
+		if (ret) {
+			dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+			goto out;
+		}
+
+		ret = regmap_write(led->regmap,
+			LP8860_EEPROM_UNLOCK,
+			LP8860_EEPROM_CODE_2);
+		if (ret) {
+			dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+			goto out;
+		}
+		ret = regmap_write(led->regmap,
+			LP8860_EEPROM_UNLOCK,
+			LP8860_EEPROM_CODE_3);
+		if (ret) {
+			dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+			goto out;
+		}
+	} else {
+		ret = regmap_write(led->regmap,
+			LP8860_EEPROM_UNLOCK,
+			LP8860_LOCK_EEPROM);
+	}
+
+out:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int lp8860_fault_check(struct lp8860_led *led)
+{
+	int ret, fault;
+	unsigned int read_buf;
+
+	ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
+	if (ret)
+		goto out;
+
+	fault = read_buf;
+
+	ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
+	if (ret)
+		goto out;
+
+	fault |= read_buf;
+
+	/* Attempt to clear any faults */
+	if (fault)
+		ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
+			LP8860_CLEAR_FAULTS);
+out:
+	return ret;
+}
+
+static void lp8860_led_brightness_work(struct work_struct *work)
+{
+	struct lp8860_led *led = container_of(work, struct lp8860_led, work);
+	int ret;
+	int disp_brightness = led->brightness * 255;
+
+	mutex_lock(&led->lock);
+
+	ret = lp8860_fault_check(led);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot read/clear faults\n");
+		goto out;
+	}
+
+	ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
+			(disp_brightness & 0xff00) >> 8);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
+		goto out;
+	}
+
+	ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
+			disp_brightness & 0xff);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
+		goto out;
+	}
+out:
+	mutex_unlock(&led->lock);
+}
+
+static void lp8860_brightness_set(struct led_classdev *led_cdev,
+				enum led_brightness brt_val)
+{
+	struct lp8860_led *led =
+			container_of(led_cdev, struct lp8860_led, led_dev);
+
+	led->brightness = brt_val;
+	schedule_work(&led->work);
+}
+
+static int lp8860_init(struct lp8860_led *led)
+{
+	unsigned int read_buf;
+	int ret, i, reg_count;
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 1);
+
+	ret = lp8860_fault_check(led);
+	if (ret)
+		goto out;
+
+	ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
+	if (ret)
+		goto out;
+
+	ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
+	if (ret) {
+		dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
+		goto out;
+	}
+
+	reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
+	for (i = 0; i < reg_count; i++) {
+		ret = regmap_write(led->eeprom_regmap,
+				lp8860_eeprom_disp_regs[i].reg,
+				lp8860_eeprom_disp_regs[i].value);
+		if (ret) {
+			dev_err(&led->client->dev, "Failed writing EEPROM\n");
+			goto out;
+		}
+	}
+
+	ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap,
+			LP8860_EEPROM_CNTRL,
+			LP8860_PROGRAM_EEPROM);
+	if (ret)
+		dev_err(&led->client->dev, "Failed programming EEPROM\n");
+out:
+	if (ret)
+		if (led->enable_gpio)
+			gpiod_direction_output(led->enable_gpio, 0);
+	return ret;
+}
+
+static struct reg_default lp8860_reg_defs[] = {
+	{ LP8860_DISP_CL1_BRT_MSB, 0x00},
+	{ LP8860_DISP_CL1_BRT_LSB, 0x00},
+	{ LP8860_DISP_CL1_CURR_MSB, 0x00},
+	{ LP8860_DISP_CL1_CURR_LSB, 0x00},
+	{ LP8860_CL2_BRT_MSB, 0x00},
+	{ LP8860_CL2_BRT_LSB, 0x00},
+	{ LP8860_CL2_CURRENT, 0x00},
+	{ LP8860_CL3_BRT_MSB, 0x00},
+	{ LP8860_CL3_BRT_LSB, 0x00},
+	{ LP8860_CL3_CURRENT, 0x00},
+	{ LP8860_CL4_BRT_MSB, 0x00},
+	{ LP8860_CL4_BRT_LSB, 0x00},
+	{ LP8860_CL4_CURRENT, 0x00},
+	{ LP8860_CONFIG, 0x00},
+	{ LP8860_FAULT_CLEAR, 0x00},
+	{ LP8860_EEPROM_CNTRL, 0x80},
+	{ LP8860_EEPROM_UNLOCK, 0x00},
+};
+
+static const struct regmap_config lp8860_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP8860_EEPROM_UNLOCK,
+	.reg_defaults = lp8860_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
+	.cache_type = REGCACHE_NONE,
+};
+
+static struct reg_default lp8860_eeprom_defs[] = {
+	{ LP8860_EEPROM_REG_0, 0x00 },
+	{ LP8860_EEPROM_REG_1, 0x00 },
+	{ LP8860_EEPROM_REG_2, 0x00 },
+	{ LP8860_EEPROM_REG_3, 0x00 },
+	{ LP8860_EEPROM_REG_4, 0x00 },
+	{ LP8860_EEPROM_REG_5, 0x00 },
+	{ LP8860_EEPROM_REG_6, 0x00 },
+	{ LP8860_EEPROM_REG_7, 0x00 },
+	{ LP8860_EEPROM_REG_8, 0x00 },
+	{ LP8860_EEPROM_REG_9, 0x00 },
+	{ LP8860_EEPROM_REG_10, 0x00 },
+	{ LP8860_EEPROM_REG_11, 0x00 },
+	{ LP8860_EEPROM_REG_12, 0x00 },
+	{ LP8860_EEPROM_REG_13, 0x00 },
+	{ LP8860_EEPROM_REG_14, 0x00 },
+	{ LP8860_EEPROM_REG_15, 0x00 },
+	{ LP8860_EEPROM_REG_16, 0x00 },
+	{ LP8860_EEPROM_REG_17, 0x00 },
+	{ LP8860_EEPROM_REG_18, 0x00 },
+	{ LP8860_EEPROM_REG_19, 0x00 },
+	{ LP8860_EEPROM_REG_20, 0x00 },
+	{ LP8860_EEPROM_REG_21, 0x00 },
+	{ LP8860_EEPROM_REG_22, 0x00 },
+	{ LP8860_EEPROM_REG_23, 0x00 },
+	{ LP8860_EEPROM_REG_24, 0x00 },
+};
+
+static const struct regmap_config lp8860_eeprom_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP8860_EEPROM_REG_24,
+	.reg_defaults = lp8860_eeprom_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
+	.cache_type = REGCACHE_NONE,
+};
+
+static int lp8860_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct lp8860_led *led;
+	struct device_node *np = client->dev.of_node;
+
+	led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->label = LP8860_DISP_LED_NAME;
+
+	if (client->dev.of_node) {
+		ret = of_property_read_string(np, "label", &led->label);
+		if (ret) {
+			dev_err(&client->dev, "Missing label in dt\n");
+			return -EINVAL;
+		}
+	}
+
+	led->enable_gpio = devm_gpiod_get(&client->dev, "enable");
+	if (IS_ERR(led->enable_gpio))
+		led->enable_gpio = NULL;
+	else
+		gpiod_direction_output(led->enable_gpio, 0);
+
+	led->regulator = devm_regulator_get(&client->dev, "vled");
+	if (IS_ERR(led->regulator))
+		led->regulator = NULL;
+
+	led->client = client;
+	led->led_dev.name = led->label;
+	led->led_dev.max_brightness = LED_FULL;
+	led->led_dev.brightness_set = lp8860_brightness_set;
+
+	mutex_init(&led->lock);
+	INIT_WORK(&led->work, lp8860_led_brightness_work);
+
+	i2c_set_clientdata(client, led);
+
+	led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
+	if (IS_ERR(led->regmap)) {
+		ret = PTR_ERR(led->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
+	if (IS_ERR(led->eeprom_regmap)) {
+		ret = PTR_ERR(led->eeprom_regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = lp8860_init(led);
+	if (ret)
+		return ret;
+
+	ret = led_classdev_register(&client->dev, &led->led_dev);
+	if (ret) {
+		dev_err(&client->dev, "led register err: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int lp8860_remove(struct i2c_client *client)
+{
+	struct lp8860_led *led = i2c_get_clientdata(client);
+	int ret;
+
+	led_classdev_unregister(&led->led_dev);
+	cancel_work_sync(&led->work);
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 0);
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(&led->client->dev,
+				"Failed to disable regulator\n");
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id lp8860_id[] = {
+	{ "lp8860", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp8860_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp8860_leds_match[] = {
+	{ .compatible = "ti,lp8860", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
+#endif
+
+static struct i2c_driver lp8860_driver = {
+	.driver = {
+		.name	= "lp8860",
+		.of_match_table = of_match_ptr(of_lp8860_leds_match),
+	},
+	.probe		= lp8860_probe,
+	.remove		= lp8860_remove,
+	.id_table	= lp8860_id,
+};
+module_i2c_driver(lp8860_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8860 LED drvier");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL");

drivers/leds/leds-regulator.c

@@ -153,24 +153,21 @@ static int regulator_led_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	vcc = regulator_get_exclusive(&pdev->dev, "vled");
+	vcc = devm_regulator_get_exclusive(&pdev->dev, "vled");
 	if (IS_ERR(vcc)) {
 		dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name);
 		return PTR_ERR(vcc);
 	}
 
 	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
-	if (led == NULL) {
-		ret = -ENOMEM;
-		goto err_vcc;
-	}
+	if (led == NULL)
+		return -ENOMEM;
 
 	led->cdev.max_brightness = led_regulator_get_max_brightness(vcc);
 	if (pdata->brightness > led->cdev.max_brightness) {
 		dev_err(&pdev->dev, "Invalid default brightness %d\n",
 				pdata->brightness);
-		ret = -EINVAL;
-		goto err_vcc;
+		return -EINVAL;
 	}
 	led->value = pdata->brightness;
 
@@ -191,7 +188,7 @@ static int regulator_led_probe(struct platform_device *pdev)
 	ret = led_classdev_register(&pdev->dev, &led->cdev);
 	if (ret < 0) {
 		cancel_work_sync(&led->work);
-		goto err_vcc;
+		return ret;
 	}
 
 	/* to expose the default value to userspace */
@@ -201,10 +198,6 @@ static int regulator_led_probe(struct platform_device *pdev)
 	regulator_led_set_value(led);
 
 	return 0;
-
-err_vcc:
-	regulator_put(vcc);
-	return ret;
 }
 
 static int regulator_led_remove(struct platform_device *pdev)
@@ -214,7 +207,6 @@ static int regulator_led_remove(struct platform_device *pdev)
 	led_classdev_unregister(&led->cdev);
 	cancel_work_sync(&led->work);
 	regulator_led_disable(led);
-	regulator_put(led->vcc);
 	return 0;
 }
 

drivers/leds/leds-syscon.c

@@ -18,10 +18,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
- * This driver provides system reboot functionality for APM X-Gene SoC.
- * For system shutdown, this is board specify. If a board designer
- * implements GPIO shutdown, use the gpio-poweroff.c driver.
  */
 #include <linux/io.h>
 #include <linux/of_device.h>
@@ -70,39 +66,13 @@ static void syscon_led_set(struct led_classdev *led_cdev,
 		dev_err(sled->cdev.dev, "error updating LED status\n");
 }
 
-static const struct of_device_id syscon_match[] = {
-	{ .compatible = "syscon", },
-	{},
-};
-
-static int __init syscon_leds_init(void)
+static int __init syscon_leds_spawn(struct device_node *np,
+				    struct device *dev,
+				    struct regmap *map)
 {
-	const struct of_device_id *devid;
-	struct device_node *np;
 	struct device_node *child;
-	struct regmap *map;
-	struct platform_device *pdev;
-	struct device *dev;
 	int ret;
 
-	np = of_find_matching_node_and_match(NULL, syscon_match,
-					     &devid);
-	if (!np)
-		return -ENODEV;
-
-	map = syscon_node_to_regmap(np);
-	if (IS_ERR(map))
-		return PTR_ERR(map);
-
-	/*
-	 * If the map is there, the device should be there, we allocate
-	 * memory on the syscon device's behalf here.
-	 */
-	pdev = of_find_device_by_node(np);
-	if (!pdev)
-		return -ENODEV;
-	dev = &pdev->dev;
-
 	for_each_available_child_of_node(np, child) {
 		struct syscon_led *sled;
 		const char *state;
@@ -150,7 +120,6 @@ static int __init syscon_leds_init(void)
 				if (ret < 0)
 					return ret;
 			}
-
 		}
 		sled->cdev.brightness_set = syscon_led_set;
 
@@ -160,7 +129,39 @@ static int __init syscon_leds_init(void)
 
 		dev_info(dev, "registered LED %s\n", sled->cdev.name);
 	}
+	return 0;
+}
+
+static int __init syscon_leds_init(void)
+{
+	struct device_node *np;
+
+	for_each_of_allnodes(np) {
+		struct platform_device *pdev;
+		struct regmap *map;
+		int ret;
+
+		if (!of_device_is_compatible(np, "syscon"))
+			continue;
+
+		map = syscon_node_to_regmap(np);
+		if (IS_ERR(map)) {
+			pr_err("error getting regmap for syscon LEDs\n");
+			continue;
+		}
+
+		/*
+		 * If the map is there, the device should be there, we allocate
+		 * memory on the syscon device's behalf here.
+		 */
+		pdev = of_find_device_by_node(np);
+		if (!pdev)
+			return -ENODEV;
+		ret = syscon_leds_spawn(np, &pdev->dev, map);
+		if (ret)
+			dev_err(&pdev->dev, "could not spawn syscon LEDs\n");
+	}
 
-       return 0;
+	return 0;
 }
 device_initcall(syscon_leds_init);

drivers/leds/leds.h

@@ -17,16 +17,28 @@
 #include <linux/rwsem.h>
 #include <linux/leds.h>
 
-static inline void __led_set_brightness(struct led_classdev *led_cdev,
+static inline void led_set_brightness_async(struct led_classdev *led_cdev,
 					enum led_brightness value)
 {
-	if (value > led_cdev->max_brightness)
-		value = led_cdev->max_brightness;
-	led_cdev->brightness = value;
+	led_cdev->brightness = min(value, led_cdev->max_brightness);
+
 	if (!(led_cdev->flags & LED_SUSPENDED))
 		led_cdev->brightness_set(led_cdev, value);
 }
 
+static inline int led_set_brightness_sync(struct led_classdev *led_cdev,
+					enum led_brightness value)
+{
+	int ret = 0;
+
+	led_cdev->brightness = min(value, led_cdev->max_brightness);
+
+	if (!(led_cdev->flags & LED_SUSPENDED))
+		ret = led_cdev->brightness_set_sync(led_cdev,
+						led_cdev->brightness);
+	return ret;
+}
+
 static inline int led_get_brightness(struct led_classdev *led_cdev)
 {
 	return led_cdev->brightness;

drivers/leds/trigger/ledtrig-backlight.c

@@ -51,9 +51,9 @@ static int fb_notifier_callback(struct notifier_block *p,
 
 	if ((n->old_status == UNBLANK) ^ n->invert) {
 		n->brightness = led->brightness;
-		__led_set_brightness(led, LED_OFF);
+		led_set_brightness_async(led, LED_OFF);
 	} else {
-		__led_set_brightness(led, n->brightness);
+		led_set_brightness_async(led, n->brightness);
 	}
 
 	n->old_status = new_status;
@@ -89,9 +89,9 @@ static ssize_t bl_trig_invert_store(struct device *dev,
 
 	/* After inverting, we need to update the LED. */
 	if ((n->old_status == BLANK) ^ n->invert)
-		__led_set_brightness(led, LED_OFF);
+		led_set_brightness_async(led, LED_OFF);
 	else
-		__led_set_brightness(led, n->brightness);
+		led_set_brightness_async(led, n->brightness);
 
 	return num;
 }

drivers/leds/trigger/ledtrig-default-on.c

@@ -19,7 +19,7 @@
 
 static void defon_trig_activate(struct led_classdev *led_cdev)
 {
-	__led_set_brightness(led_cdev, led_cdev->max_brightness);
+	led_set_brightness_async(led_cdev, led_cdev->max_brightness);
 }
 
 static struct led_trigger defon_led_trigger = {

drivers/leds/trigger/ledtrig-gpio.c

@@ -54,12 +54,12 @@ static void gpio_trig_work(struct work_struct *work)
 
 	if (tmp) {
 		if (gpio_data->desired_brightness)
-			__led_set_brightness(gpio_data->led,
+			led_set_brightness_async(gpio_data->led,
 					   gpio_data->desired_brightness);
 		else
-			__led_set_brightness(gpio_data->led, LED_FULL);
+			led_set_brightness_async(gpio_data->led, LED_FULL);
 	} else {
-		__led_set_brightness(gpio_data->led, LED_OFF);
+		led_set_brightness_async(gpio_data->led, LED_OFF);
 	}
 }
 

drivers/leds/trigger/ledtrig-heartbeat.c

@@ -74,7 +74,7 @@ static void led_heartbeat_function(unsigned long data)
 		break;
 	}
 
-	__led_set_brightness(led_cdev, brightness);
+	led_set_brightness_async(led_cdev, brightness);
 	mod_timer(&heartbeat_data->timer, jiffies + delay);
 }
 

drivers/leds/trigger/ledtrig-oneshot.c

@@ -63,9 +63,9 @@ static ssize_t led_invert_store(struct device *dev,
 	oneshot_data->invert = !!state;
 
 	if (oneshot_data->invert)
-		__led_set_brightness(led_cdev, LED_FULL);
+		led_set_brightness_async(led_cdev, LED_FULL);
 	else
-		__led_set_brightness(led_cdev, LED_OFF);
+		led_set_brightness_async(led_cdev, LED_OFF);
 
 	return size;
 }

drivers/leds/trigger/ledtrig-transient.c

@@ -41,7 +41,7 @@ static void transient_timer_function(unsigned long data)
 	struct transient_trig_data *transient_data = led_cdev->trigger_data;
 
 	transient_data->activate = 0;
-	__led_set_brightness(led_cdev, transient_data->restore_state);
+	led_set_brightness_async(led_cdev, transient_data->restore_state);
 }
 
 static ssize_t transient_activate_show(struct device *dev,
@@ -72,7 +72,8 @@ static ssize_t transient_activate_store(struct device *dev,
 	if (state == 0 && transient_data->activate == 1) {
 		del_timer(&transient_data->timer);
 		transient_data->activate = state;
-		__led_set_brightness(led_cdev, transient_data->restore_state);
+		led_set_brightness_async(led_cdev,
+					transient_data->restore_state);
 		return size;
 	}
 
@@ -80,7 +81,7 @@ static ssize_t transient_activate_store(struct device *dev,
 	if (state == 1 && transient_data->activate == 0 &&
 	    transient_data->duration != 0) {
 		transient_data->activate = state;
-		__led_set_brightness(led_cdev, transient_data->state);
+		led_set_brightness_async(led_cdev, transient_data->state);
 		transient_data->restore_state =
 		    (transient_data->state == LED_FULL) ? LED_OFF : LED_FULL;
 		mod_timer(&transient_data->timer,
@@ -203,7 +204,8 @@ static void transient_trig_deactivate(struct led_classdev *led_cdev)
 
 	if (led_cdev->activated) {
 		del_timer_sync(&transient_data->timer);
-		__led_set_brightness(led_cdev, transient_data->restore_state);
+		led_set_brightness_async(led_cdev,
+					transient_data->restore_state);
 		device_remove_file(led_cdev->dev, &dev_attr_activate);
 		device_remove_file(led_cdev->dev, &dev_attr_duration);
 		device_remove_file(led_cdev->dev, &dev_attr_state);

include/linux/leds.h

@@ -13,6 +13,7 @@
 #define __LINUX_LEDS_H_INCLUDED
 
 #include <linux/list.h>
+#include <linux/mutex.h>
 #include <linux/rwsem.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
@@ -42,11 +43,20 @@ struct led_classdev {
 #define LED_BLINK_ONESHOT	(1 << 17)
 #define LED_BLINK_ONESHOT_STOP	(1 << 18)
 #define LED_BLINK_INVERT	(1 << 19)
+#define LED_SYSFS_DISABLE	(1 << 20)
+#define SET_BRIGHTNESS_ASYNC	(1 << 21)
+#define SET_BRIGHTNESS_SYNC	(1 << 22)
 
 	/* Set LED brightness level */
 	/* Must not sleep, use a workqueue if needed */
 	void		(*brightness_set)(struct led_classdev *led_cdev,
 					  enum led_brightness brightness);
+	/*
+	 * Set LED brightness level immediately - it can block the caller for
+	 * the time required for accessing a LED device register.
+	 */
+	int		(*brightness_set_sync)(struct led_classdev *led_cdev,
+					enum led_brightness brightness);
 	/* Get LED brightness level */
 	enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
 
@@ -85,6 +95,9 @@ struct led_classdev {
 	/* true if activated - deactivate routine uses it to do cleanup */
 	bool			activated;
 #endif
+
+	/* Ensures consistent access to the LED Flash Class device */
+	struct mutex		led_access;
 };
 
 extern int led_classdev_register(struct device *parent,
@@ -151,6 +164,33 @@ extern void led_set_brightness(struct led_classdev *led_cdev,
  */
 extern int led_update_brightness(struct led_classdev *led_cdev);
 
+/**
+ * led_sysfs_disable - disable LED sysfs interface
+ * @led_cdev: the LED to set
+ *
+ * Disable the led_cdev's sysfs interface.
+ */
+extern void led_sysfs_disable(struct led_classdev *led_cdev);
+
+/**
+ * led_sysfs_enable - enable LED sysfs interface
+ * @led_cdev: the LED to set
+ *
+ * Enable the led_cdev's sysfs interface.
+ */
+extern void led_sysfs_enable(struct led_classdev *led_cdev);
+
+/**
+ * led_sysfs_is_disabled - check if LED sysfs interface is disabled
+ * @led_cdev: the LED to query
+ *
+ * Returns: true if the led_cdev's sysfs interface is disabled.
+ */
+static inline bool led_sysfs_is_disabled(struct led_classdev *led_cdev)
+{
+	return led_cdev->flags & LED_SYSFS_DISABLE;
+}
+
 /*
  * LED Triggers
  */