Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 2d483550 编写于 作者: L Linus Walleij
浏览文件
操作

dt-bindings: arm: Drop the non-YAML bindings 

We created new bindings for the ARM Board using YAML
so delete the old human-parseable-only bindings.

Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 4fb00d90
隐藏空白更改
内联 并排
Showing with 0 addition and 466 deletion
Documentation/devicetree/bindings/arm/arm-boards 已删除 100644 → 0
浏览文件 @ 4fb00d90
ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform)
-----------------------------------------------------------------------------
ARM's oldest Linux-supported platform with connectors for different core
tiles of ARMv4, ARMv5 and ARMv6 type.
Required properties (in root node):
compatible = "arm,integrator-ap"; /* Application Platform */
compatible = "arm,integrator-cp"; /* Compact Platform */
FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
Required nodes:
- core-module: the root node to the Integrator platforms must have
a core-module with regs and the compatible string
"arm,core-module-integrator"
- external-bus-interface: the root node to the Integrator platforms
must have an external bus interface with regs and the
compatible-string "arm,external-bus-interface"
Required properties for the core module:
- regs: the location and size of the core module registers, one
range of 0x200 bytes.
- syscon: the root node of the Integrator platforms must have a
system controller node pointing to the control registers,
with the compatible string
"arm,integrator-ap-syscon"
"arm,integrator-cp-syscon"
respectively.
Required properties for the system controller:
- regs: the location and size of the system controller registers,
one range of 0x100 bytes.
Required properties for the AP system controller:
- interrupts: the AP syscon node must include the logical module
interrupts, stated in order of module instance <module 0>,
<module 1>, <module 2> ... for the CP system controller this
is not required not of any use.
/dts-v1/;
/include/ "integrator.dtsi"
/ {
model = "ARM Integrator/AP";
compatible = "arm,integrator-ap";
core-module@10000000 {
compatible = "arm,core-module-integrator";
reg = <0x10000000 0x200>;
};
ebi@12000000 {
compatible = "arm,external-bus-interface";
reg = <0x12000000 0x100>;
};
syscon {
compatible = "arm,integrator-ap-syscon";
reg = <0x11000000 0x100>;
interrupt-parent = <&pic>;
/* These are the logic module IRQs */
interrupts = <9>, <10>, <11>, <12>;
};
};
ARM Versatile Application and Platform Baseboards
-------------------------------------------------
ARM's development hardware platform with connectors for customizable
core tiles. The hardware configuration of the Versatile boards is
highly customizable.
Required properties (in root node):
compatible = "arm,versatile-ab"; /* Application baseboard */
compatible = "arm,versatile-pb"; /* Platform baseboard */
Interrupt controllers:
- VIC required properties:
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
- SIC required properties:
compatible = "arm,versatile-sic";
interrupt-controller;
#interrupt-cells = <1>;
Required nodes:
- core-module: the root node to the Versatile platforms must have
a core-module with regs and the compatible strings
"arm,core-module-versatile", "syscon"
Optional nodes:
- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface
board mounted, this has a separate system controller that is
defined in this node.
Required properties:
compatible = "arm,versatile-ib2-syscon", "syscon"
ARM RealView Boards
-------------------
The RealView boards cover tailored evaluation boards that are used to explore
the ARM11 and Cortex A-8 and Cortex A-9 processors.
Required properties (in root node):
/* RealView Emulation Baseboard */
compatible = "arm,realview-eb";
/* RealView Platform Baseboard for ARM1176JZF-S */
compatible = "arm,realview-pb1176";
/* RealView Platform Baseboard for ARM11 MPCore */
compatible = "arm,realview-pb11mp";
/* RealView Platform Baseboard for Cortex A-8 */
compatible = "arm,realview-pba8";
/* RealView Platform Baseboard Explore for Cortex A-9 */
compatible = "arm,realview-pbx";
Required nodes:
- soc: some node of the RealView platforms must be the SoC
node that contain the SoC-specific devices, with the compatible
string set to one of these tuples:
"arm,realview-eb-soc", "simple-bus"
"arm,realview-pb1176-soc", "simple-bus"
"arm,realview-pb11mp-soc", "simple-bus"
"arm,realview-pba8-soc", "simple-bus"
"arm,realview-pbx-soc", "simple-bus"
- syscon: some subnode of the RealView SoC node must be a
system controller node pointing to the control registers,
with the compatible string set to one of these:
"arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon"
"arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon"
"arm,realview-eb-syscon", "syscon"
"arm,realview-pb1176-syscon", "syscon"
"arm,realview-pb11mp-syscon", "syscon"
"arm,realview-pba8-syscon", "syscon"
"arm,realview-pbx-syscon", "syscon"
Required properties for the system controller:
- regs: the location and size of the system controller registers,
one range of 0x1000 bytes.
Example:
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "ARM RealView PB1176 with device tree";
compatible = "arm,realview-pb1176";
#address-cells = <1>;
#size-cells = <1>;
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,realview-pb1176-soc", "simple-bus";
ranges;
syscon: syscon@10000000 {
compatible = "arm,realview-syscon", "syscon";
reg = <0x10000000 0x1000>;
};
};
};
ARM Versatile Express Boards
-----------------------------
For details on the device tree bindings for ARM Versatile Express boards
please consult the vexpress.txt file in the same directory as this file.
ARM Juno Boards
----------------
The Juno boards are targeting development for AArch64 systems. The first
iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
with the second iteration, Juno r1, mainly aimed at development of PCIe
based systems. Juno r1 also has support for AXI masters placed on the TLX
connectors to join the coherency domain.
Juno boards are described in a similar way to ARM Versatile Express boards,
with the motherboard part of the hardware being described in a separate file
to highlight the fact that is part of the support infrastructure for the SoC.
Juno device tree bindings also share the Versatile Express bindings as
described under the RS1 memory mapping.
Required properties (in root node):
compatible = "arm,juno"; /* For Juno r0 board */
compatible = "arm,juno-r1"; /* For Juno r1 board */
compatible = "arm,juno-r2"; /* For Juno r2 board */
Required nodes:
The description for the board must include:
- a "psci" node describing the boot method used for the secondary CPUs.
A detailed description of the bindings used for "psci" nodes is present
in the psci.yaml file.
- a "cpus" node describing the available cores and their associated
"enable-method"s. For more details see cpus.yaml file.
Example:
/dts-v1/;
/ {
model = "ARM Juno development board (r0)";
compatible = "arm,juno", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
A57_0: cpu@0 {
compatible = "arm,cortex-a57";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
};
.....
A53_0: cpu@100 {
compatible = "arm,cortex-a53";
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
};
.....
};
};
Documentation/devicetree/bindings/arm/vexpress.txt 已删除 100644 → 0
浏览文件 @ 4fb00d90
ARM Versatile Express boards family
-----------------------------------
ARM's Versatile Express platform consists of a motherboard and one
or more daughterboards (tiles). The motherboard provides a set of
peripherals. Processor and RAM "live" on the tiles.
The motherboard and each core tile should be described by a separate
Device Tree source file, with the tile's description including
the motherboard file using a /include/ directive. As the motherboard
can be initialized in one of two different configurations ("memory
maps"), care must be taken to include the correct one.
Root node
---------
Required properties in the root node:
- compatible value:
compatible = "arm,vexpress,<model>", "arm,vexpress";
where <model> is the full tile model name (as used in the tile's
Technical Reference Manual), eg.:
- for Coretile Express A5x2 (V2P-CA5s):
compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
- for Coretile Express A9x4 (V2P-CA9):
compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
If a tile comes in several variants or can be used in more then one
configuration, the compatible value should be:
compatible = "arm,vexpress,<model>,<variant>", \
"arm,vexpress,<model>", "arm,vexpress";
eg:
- Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
compatible = "arm,vexpress,v2p-ca15,tc1", \
"arm,vexpress,v2p-ca15", "arm,vexpress";
- LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
"arm,vexpress,v2f-2xv6", "arm,vexpress";
Optional properties in the root node:
- tile model name (use name from the tile's Technical Reference
Manual, eg. "V2P-CA5s")
model = "<model>";
- tile's HBI number (unique ARM's board model ID, visible on the
PCB's silkscreen) in hexadecimal transcription:
arm,hbi = <0xhbi>
eg:
- for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
arm,hbi = <0x191>;
- Coretile Express A9x4 (V2P-CA9) HBI-0225:
arm,hbi = <0x225>;
CPU nodes
---------
Top-level standard "cpus" node is required. It must contain a node
with device_type = "cpu" property for every available core, eg.:
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a5";
reg = <0>;
};
};
Configuration infrastructure
----------------------------
The platform has an elaborated configuration system, consisting of
microcontrollers residing on the mother- and daughterboards known
as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
The controllers are responsible for the platform initialization
(reset generation, flash programming, FPGA bitfiles loading etc.)
but also control clock generators, voltage regulators, gather
environmental data like temperature, power consumption etc. Even
the video output switch (FPGA) is controlled that way.
The controllers are not mapped into normal memory address space
and must be accessed through bridges - other devices capable
of generating transactions on the configuration bus.
The nodes describing configuration controllers must define
the following properties:
- compatible value:
compatible = "arm,vexpress,config-bus";
- bridge phandle:
arm,vexpress,config-bridge = <phandle>;
and children describing available functions.
Platform topology
-----------------
As Versatile Express can be configured in number of physically
different setups, the device tree should describe platform topology.
Root node and main motherboard node must define the following
property, describing physical location of the children nodes:
- site number:
arm,vexpress,site = <number>;
where 0 means motherboard, 1 or 2 are daugtherboard sites,
0xf means "master" site (site containing main CPU tile)
- when daughterboards are stacked on one site, their position
in the stack be be described with:
arm,vexpress,position = <number>;
- when describing tiles consisting more than one DCC, its number
can be described with:
arm,vexpress,dcc = <number>;
Any of the numbers above defaults to zero if not defined in
the node or any of its parent.
Motherboard
-----------
The motherboard description file provides a single "motherboard" node
using 2 address cells corresponding to the Static Memory Bus used
between the motherboard and the tile. The first cell defines the Chip
Select (CS) line number, the second cell address offset within the CS.
All interrupt lines between the motherboard and the tile are active
high and are described using single cell.
Optional properties of the "motherboard" node:
- motherboard's memory map variant:
arm,v2m-memory-map = "<name>";
where name is one of:
- "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
referred to as "ARM Cortex-A Series memory map":
arm,v2m-memory-map = "rs1";
When this property is missing, the motherboard is using the original
memory map (also known as the "Legacy memory map", primarily used
with the original CoreTile Express A9x4) with peripherals on CS7.
Motherboard .dtsi files provide a set of labelled peripherals that
can be used to obtain required phandle in the tile's "aliases" node:
- UARTs, note that the numbers correspond to the physical connectors
on the motherboard's back panel:
v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
- I2C controllers:
v2m_i2c_dvi and v2m_i2c_pcie
- SP804 timers:
v2m_timer01 and v2m_timer23
The tile description should define a "smb" node, describing the
Static Memory Bus between the tile and motherboard. It must define
the following properties:
- "simple-bus" compatible value (to ensure creation of the children)
compatible = "simple-bus";
- mapping of the SMB CS/offset addresses into main address space:
#address-cells = <2>;
#size-cells = <1>;
ranges = <...>;
- interrupts mapping:
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <...>;
Example of a VE tile description (simplified)
---------------------------------------------
/dts-v1/;
/ {
model = "V2P-CA5s";
arm,hbi = <0x225>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
serial0 = &v2m_serial0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a5";
reg = <0>;
};
};
gic: interrupt-controller@2c001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x2c001000 0x1000>,
<0x2c000100 0x100>;
};
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
compatible = "arm,vexpress-osc";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
/* CS0 is visible at 0x08000000 */
ranges = <0 0 0x08000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
/* Active high IRQ 0 is connected to GIC's SPI0 */
interrupt-map = <0 0 0 &gic 0 0 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或