Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...

Documentation/arm/Samsung-S3C24XX/GPIO.txt

@@ -51,7 +51,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
 
@@ -65,11 +65,11 @@ Configuring a pin
 
   Eg:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 
-   which would turn GPA0 into the lowest Address line A0, and set
-   GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
 
 Reading the current configuration

MAINTAINERS

@@ -681,6 +681,13 @@ M:	sakoman@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
+P:	Philipp Zabel
+M:	philipp.zabel@gmail.com
+S:	Maintained
+F:	arch/arm/mach-pxa/hx4700.c
+F:	arch/arm/mach-pxa/include/mach/hx4700.h
+
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 P:	Kristoffer Ericson
 M:	kristoffer.ericson@gmail.com
@@ -4159,6 +4166,69 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+OMAP SUPPORT
+P:	Tony Lindgren <tony@atomide.com>
+M:	tony@atomide.com
+L:	linux-omap@vger.kernel.org
+W:	http://www.muru.com/linux/omap/
+W:	http://linux.omap.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S:	Maintained
+F:	arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P:	Paul Walmsley
+M:	paul@pwsan.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P:	Kevin Hilman
+M:	khilman@deeprootsystems.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P:	Jarkko Nikula
+M:	jhnikula@gmail.com
+L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P:	Imre Deak
+M:	imre.deak@nokia.com
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/video/omap/
+
+OMAP MMC SUPPORT
+P:	Jarkko Lavinen
+M:	jarkko.lavinen@nokia.com
+L:	linux-kernel@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P:	Deepak Saxena
+M:	dsaxena@plexity.net
+S:	Maintained
+F:	drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+
 OMFS FILESYSTEM
 P:	Bob Copeland
 M:	me@bobcopeland.com
@@ -4597,7 +4667,7 @@ F:	drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Russell King
 M:	linux@arm.linux.org.uk
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
@@ -4612,19 +4682,19 @@ F:	sound/soc/pxa
 
 PXA168 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Jason Chagas
 M:	jason.chagas@marvell.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA910 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA MMCI DRIVER
 S:	Orphan
@@ -5145,7 +5215,6 @@ P:	Vincent Sanders
 M:	support@simtec.co.uk
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
-F:	arch/arm/mach-ebsa110/
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
@@ -5559,20 +5628,6 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
-TI OMAP MMC INTERFACE DRIVER
-P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap@vger.kernel.org
-W:	http://linux.omap.com
-W:	http://www.muru.com/linux/omap/
-S:	Maintained
-F:	drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
-S:	Maintained
-F:	drivers/char/hw_random/omap-rng.c
-
 TIPC NETWORK LAYER
 P:	Per Liden
 M:	per.liden@ericsson.com

arch/arm/Kconfig

@@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION
 
 config GENERIC_GPIO
 	bool
-	default n
 
 config GENERIC_TIME
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
@@ -55,7 +52,6 @@ config MMU
 
 config NO_IOPORT
 	bool
-	default n
 
 config EISA
 	bool
@@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM
 
 config ARCH_HAS_ILOG2_U32
 	bool
-	default n
 
 config ARCH_HAS_ILOG2_U64
 	bool
-	default n
 
 config GENERIC_HWEIGHT
 	bool
@@ -253,6 +247,14 @@ config ARCH_CLPS711X
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
+config ARCH_GEMINI
+	bool "Cortina Systems Gemini"
+	select CPU_FA526
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Cortina Systems Gemini family SoCs
+
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select CPU_SA110
@@ -277,14 +279,6 @@ config ARCH_EP93XX
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
-config ARCH_GEMINI
-	bool "Cortina Systems Gemini"
-	select CPU_FA526
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for the Cortina Systems Gemini family SoCs
-
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
@@ -293,6 +287,30 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
+config ARCH_MXC
+	bool "Freescale MXC/iMX-based"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+config ARCH_STMP3XXX
+	bool "Freescale STMP3xxx"
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select USB_ARCH_HAS_EHCI
+	help
+	  Support for systems based on the Freescale 3xxx CPUs.
+
 config ARCH_NETX
 	bool "Hilscher NetX based"
 	select CPU_ARM926T
@@ -309,15 +327,6 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
-config ARCH_IMX
-	bool "IMX"
-	select CPU_ARM920T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Motorola's i.MX family of processors (MX1, MXL).
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -398,6 +407,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -405,28 +415,6 @@ config ARCH_KIRKWOOD
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
 
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
-	select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
-
-config ARCH_NS9XXX
-	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-	  System.
-
-	  <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
 	select CPU_FEROCEON
@@ -441,6 +429,7 @@ config ARCH_MV78XX0
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -448,23 +437,13 @@ config ARCH_MV78XX0
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
 
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -473,6 +452,52 @@ config ARCH_ORION5X
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
 	  Orion-2 (5281), Orion-1-90 (6183).
 
+config ARCH_MMP
+	bool "Marvell PXA168/910"
+	depends on MMU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+	bool "Micrel/Kendin KS8695"
+	select CPU_ARM922T
+	select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+	  System-on-Chip devices.
+
+config ARCH_NS9XXX
+	bool "NetSilicon NS9xxx"
+	select CPU_ARM926T
+	select GENERIC_GPIO
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	help
+	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+	  System.
+
+	  <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+	bool "Nuvoton W90X900 CPU"
+	select CPU_ARM926T
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	select COMMON_CLKDEV
+	help
+		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+		can login www.mcuos.com or www.nuvoton.com to know more.
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
@@ -495,19 +520,16 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MMP
-	bool "Marvell PXA168/910"
-	depends on MMU
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
+config ARCH_MSM
+	bool "Qualcomm MSM"
+	select CPU_V6
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select TICK_ONESHOT
-	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/910 processor line.
+	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+	  apps processor of the MSM7K and depends on a shared memory
+	  interface to the ARM9 modem processor which runs the baseband stack
+	  and controls some vital subsystems (clock and power control, etc).
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -576,6 +598,20 @@ config ARCH_LH7A40X
 	  core with a wide array of integrated devices for
 	  hand-held and low-power applications.
 
+config ARCH_U300
+	bool "ST-Ericsson U300 Series"
+	depends on MMU
+	select CPU_ARM926T
+	select ARM_AMBA
+	select ARM_VIC
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_GPIO
+	help
+	  Support for ST-Ericsson U300 series mobile platforms.
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select CPU_ARM926T
@@ -587,6 +623,7 @@ config ARCH_DAVINCI
 	select ZONE_DMA
 	select HAVE_IDE
 	select COMMON_CLKDEV
+	select GENERIC_ALLOCATOR
 	help
 	  Support for TI's DaVinci platform.
 
@@ -600,24 +637,6 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM
-	bool "Qualcomm MSM"
-	select CPU_V6
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
-	  apps processor of the MSM7K and depends on a shared memory
-	  interface to the ARM9 modem processor which runs the baseband stack
-	  and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
-	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
-
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -681,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig"
 source "arch/arm/mach-s3c6410/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/plat-stmp3xxx/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
 
@@ -707,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
+source "arch/arm/mach-u300/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -859,8 +880,11 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -878,6 +902,18 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config HAVE_ARM_SCU
+	bool
+	depends on SMP
+	help
+	  This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+	bool
+	depends on SMP
+	help
+	  This options enables support for the ARM timer and watchdog unit
+
 choice
 	prompt "Memory split"
 	default VMSPLIT_3G
@@ -916,8 +952,10 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
 	default y
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -979,7 +1017,6 @@ config OABI_COMPAT
 
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
@@ -1022,12 +1059,12 @@ source "mm/Kconfig"
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
 		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182
+		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP
 	  correct operation of some network protocols. With an IP-only
 	  configuration it is safe to say N, otherwise say Y.
 
+config UACCESS_WITH_MEMCPY
+	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
+	depends on MMU && EXPERIMENTAL
+	default y if CPU_FEROCEON
+	help
+	  Implement faster copy_to_user and clear_user methods for CPU
+	  cores where a 8-word STM instruction give significantly higher
+	  memory write throughput than a sequence of individual 32bit stores.
+
+	  A possible side effect is a slight increase in scheduling latency
+	  between threads sharing the same address space if they invoke
+	  such copy operations with large buffers.
+
+	  However, if the CPU data cache is using a write-allocate mode,
+	  this option is unlikely to provide any performance gain.
+
 endmenu
 
 menu "Boot options"
@@ -1188,7 +1241,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR
 
 	  If in doubt, say Y.
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_IMX && CPU_FREQ
-	default n
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
-	  If in doubt, say N.
+config CPU_FREQ_PXA
+	bool
+	depends on CPU_FREQ && ARCH_PXA && PXA25x
+	default y
+	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
 endif
 

arch/arm/Makefile

@@ -11,6 +11,9 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux	+= --be8
+endif
 CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
@@ -99,64 +102,73 @@ CHECKFLAGS	+= -D__arm__
 #Default value
 head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
-
- machine-$(CONFIG_ARCH_RPC)	   := rpc
- machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
- machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
- machine-$(CONFIG_ARCH_SHARK)	   := shark
- machine-$(CONFIG_ARCH_SA1100)	   := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111)	   := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
 endif
- machine-$(CONFIG_ARCH_PXA)	   := pxa
- machine-$(CONFIG_ARCH_MMP)	   := mmp
-    plat-$(CONFIG_PLAT_PXA)	   := pxa
- machine-$(CONFIG_ARCH_L7200)	   := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI)     := gemini
- textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
- machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
- machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
- machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
-    plat-$(CONFIG_PLAT_IOP)	   := iop
- machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1)	   := omap1
- machine-$(CONFIG_ARCH_OMAP2)	   := omap2
- machine-$(CONFIG_ARCH_OMAP3)	   := omap2
-    plat-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0)	   := s3c24a0
-    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX)	   := s3c6400 s3c6410
-    plat-$(CONFIG_PLAT_S3C64XX)	   := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE)  := versatile
- machine-$(CONFIG_ARCH_IMX)	   := imx
- machine-$(CONFIG_ARCH_H720X)	   := h720x
- machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)	   := at91
- machine-$(CONFIG_ARCH_EP93XX)	   := ep93xx
- machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
- machine-$(CONFIG_ARCH_NETX)	   := netx
- machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
- machine-$(CONFIG_ARCH_KS8695)     := ks8695
-    plat-$(CONFIG_ARCH_MXC)	   := mxc
- machine-$(CONFIG_ARCH_MX2)	   := mx2
- machine-$(CONFIG_ARCH_MX3)	   := mx3
- machine-$(CONFIG_ARCH_MX1)	   := mx1
- machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
-    plat-$(CONFIG_PLAT_ORION)	   := orion
- machine-$(CONFIG_ARCH_MSM)	   := msm
- machine-$(CONFIG_ARCH_LOKI)       := loki
- machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
- machine-$(CONFIG_ARCH_W90X900)    := w90x900
+
+# Machine directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
+machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
+machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
+machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
+machine-$(CONFIG_ARCH_GEMINI)		:= gemini
+machine-$(CONFIG_ARCH_H720X)		:= h720x
+machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
+machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
+machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
+machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
+machine-$(CONFIG_ARCH_IXP2000)		:= ixp2000
+machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
+machine-$(CONFIG_ARCH_KS8695)		:= ks8695
+machine-$(CONFIG_ARCH_L7200)		:= l7200
+machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
+machine-$(CONFIG_ARCH_LOKI) 		:= loki
+machine-$(CONFIG_ARCH_MMP)		:= mmp
+machine-$(CONFIG_ARCH_MSM)		:= msm
+machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
+machine-$(CONFIG_ARCH_MX1)		:= mx1
+machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
+machine-$(CONFIG_ARCH_OMAP1)		:= omap1
+machine-$(CONFIG_ARCH_OMAP2)		:= omap2
+machine-$(CONFIG_ARCH_OMAP3)		:= omap2
+machine-$(CONFIG_ARCH_OMAP4)		:= omap2
+machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
+machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
+machine-$(CONFIG_ARCH_PXA)		:= pxa
+machine-$(CONFIG_ARCH_REALVIEW)		:= realview
+machine-$(CONFIG_ARCH_RPC)		:= rpc
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100)		:= sa1100
+machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
+machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_U300)		:= u300
+machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
+machine-$(CONFIG_ARCH_W90X900)		:= w90x900
+machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+
+# Platform directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC)		:= mxc
+plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_PLAT_IOP)		:= iop
+plat-$(CONFIG_PLAT_ORION)	:= orion
+plat-$(CONFIG_PLAT_PXA)		:= pxa
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

arch/arm/boot/compressed/Makefile

@@ -40,7 +40,7 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
 OBJS		+= head-sharpsl.o
 endif
 
-ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
 ifeq ($(CONFIG_CPU_CP15),y)
 OBJS		+= big-endian.o
 else
@@ -78,6 +78,9 @@ EXTRA_AFLAGS  := -Wa,-march=all
 # linker symbols.  We only define initrd_phys and params_phys if the
 # machine class defined the corresponding makefile variable.
 LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
 ifneq ($(INITRD_PHYS),)
 LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
 endif

arch/arm/boot/compressed/head.S

@@ -438,6 +438,9 @@ __armv4_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
@@ -455,6 +458,9 @@ __armv7_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer

arch/arm/common/Kconfig

@@ -4,6 +4,14 @@ config ARM_GIC
 config ARM_VIC
 	bool
 
+config ARM_VIC_NR
+	int
+	default 2
+	depends on ARM_VIC
+	help
+	  The maximum number of VICs available in the system, for
+	  power management.
+
 config ICST525
 	bool
 
@@ -27,10 +35,6 @@ config SHARP_LOCOMO
 config SHARP_PARAM
 	bool
 
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-
 config SHARP_SCOOP
 	bool
 

arch/arm/common/Makefile

@@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
-obj-$(CONFIG_SHARPSL_PM)	+= sharpsl_pm.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o

arch/arm/common/clkdev.c

@@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
 }
 EXPORT_SYMBOL(clkdev_alloc);
 
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_get(dev, id);
+	struct clk_lookup *l;
+
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	l = clkdev_alloc(r, alias, alias_dev_name);
+	clk_put(r);
+	if (!l)
+		return -ENODEV;
+	clkdev_add(l);
+	return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
 /*
  * clkdev_drop - remove a clock dynamically allocated
  */

arch/arm/common/vic.c

@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
+/**
+ * struct vic_device - VIC PM device
+ * @sysdev: The system device which is registered.
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+struct vic_device {
+	struct sys_device sysdev;
+
+	void __iomem	*base;
+	int		irq;
+	u32		resume_sources;
+	u32		resume_irqs;
+	u32		int_select;
+	u32		int_enable;
+	u32		soft_int;
+	u32		protect;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static inline struct vic_device *to_vic(struct sys_device *sys)
+{
+	return container_of(sys, struct vic_device, sysdev);
+}
+
+static int vic_id;
+
+static int vic_class_resume(struct sys_device *dev)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+	/* re-initialise static settings */
+	vic_init2(base);
+
+	writel(vic->int_select, base + VIC_INT_SELECT);
+	writel(vic->protect, base + VIC_PROTECT);
+
+	/* set the enabled ints and then clear the non-enabled */
+	writel(vic->int_enable, base + VIC_INT_ENABLE);
+	writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+	/* and the same for the soft-int register */
+
+	writel(vic->soft_int, base + VIC_INT_SOFT);
+	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+
+	return 0;
+}
+
+static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+	vic->int_select = readl(base + VIC_INT_SELECT);
+	vic->int_enable = readl(base + VIC_INT_ENABLE);
+	vic->soft_int = readl(base + VIC_INT_SOFT);
+	vic->protect = readl(base + VIC_PROTECT);
+
+	/* set the interrupts (if any) that are used for
+	 * resuming the system */
+
+	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+
+	return 0;
+}
+
+struct sysdev_class vic_class = {
+	.name		= "vic",
+	.suspend	= vic_class_suspend,
+	.resume		= vic_class_resume,
+};
+
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+	struct vic_device *v;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices))
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+	else {
+		v = &vic_devices[vic_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		vic_id++;
+	}
+}
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+	struct vic_device *dev = vic_devices;
+	int err;
+	int id;
+
+	if (vic_id == 0)
+		return 0;
+
+	err = sysdev_class_register(&vic_class);
+	if (err) {
+		printk(KERN_ERR "%s: cannot register class\n", __func__);
+		return err;
+	}
+
+	for (id = 0; id < vic_id; id++, dev++) {
+		dev->sysdev.id = id;
+		dev->sysdev.cls = &vic_class;
+
+		err = sysdev_register(&dev->sysdev);
+		if (err) {
+			printk(KERN_ERR "%s: failed to register device\n",
+			       __func__);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(vic_pm_init);
+
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+        struct vic_device *v = vic_devices;
+	unsigned int base_irq = irq & ~31;
+	int id;
+
+	for (id = 0; id < vic_id; id++, v++) {
+		if (v->irq == base_irq)
+			return v;
+	}
+
+	return NULL;
+}
+
+static int vic_set_wake(unsigned int irq, unsigned int on)
+{
+	struct vic_device *v = vic_from_irq(irq);
+	unsigned int off = irq & 31;
+
+	if (!v)
+		return -EINVAL;
+
+	if (on)
+		v->resume_irqs |= 1 << off;
+	else
+		v->resume_irqs &= ~(1 << off);
+
+	return 0;
+}
+
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
 	.ack	= vic_mask_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
+	.set_wake = vic_set_wake,
 };
 
 /**
@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
  * @base: iomem base address
  * @irq_start: starting interrupt number, must be muliple of 32
  * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
  */
 void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources)
+		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
 
@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
 
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	vic_init2(base);
 
 	for (i = 0; i < 32; i++) {
 		if (vic_sources & (1 << i)) {
@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
+
+	vic_pm_register(base, irq_start, resume_sources);
 }

arch/arm/configs/davinci_all_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
 
 #
 # TI DaVinci Implementations
@@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y
 # DaVinci Core Type
 #
 CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
 
 #
 # DaVinci Board Type
 #
 CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -245,7 +252,7 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1778,6 +1790,7 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/configs/kirkwood_defconfig

@@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
+CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y
@@ -270,7 +271,9 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation

arch/arm/configs/magician_defconfig

@@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 # CONFIG_MACH_CM_X300 is not set
+CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
 # CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
@@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
+CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
 # CONFIG_TPS65010 is not set
@@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
+CONFIG_FB_W100=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set

arch/arm/configs/orion5x_defconfig

@@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set

arch/arm/configs/rx51_defconfig

@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 

arch/arm/include/asm/cputype.h

@@ -8,6 +8,21 @@
 #define CPUID_TCM	2
 #define CPUID_TLBTYPE	3
 
+#define CPUID_EXT_PFR0	"c1, 0"
+#define CPUID_EXT_PFR1	"c1, 1"
+#define CPUID_EXT_DFR0	"c1, 2"
+#define CPUID_EXT_AFR0	"c1, 3"
+#define CPUID_EXT_MMFR0	"c1, 4"
+#define CPUID_EXT_MMFR1	"c1, 5"
+#define CPUID_EXT_MMFR2	"c1, 6"
+#define CPUID_EXT_MMFR3	"c1, 7"
+#define CPUID_EXT_ISAR0	"c2, 0"
+#define CPUID_EXT_ISAR1	"c2, 1"
+#define CPUID_EXT_ISAR2	"c2, 2"
+#define CPUID_EXT_ISAR3	"c2, 3"
+#define CPUID_EXT_ISAR4	"c2, 4"
+#define CPUID_EXT_ISAR5	"c2, 5"
+
 #ifdef CONFIG_CPU_CP15
 #define read_cpuid(reg)							\
 	({								\
@@ -18,9 +33,19 @@
 		    : "cc");						\
 		__val;							\
 	})
+#define read_cpuid_ext(ext_reg)						\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, " ext_reg		\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
 #else
 extern unsigned int processor_id;
 #define read_cpuid(reg) (processor_id)
+#define read_cpuid_ext(reg) 0
 #endif
 
 /*

arch/arm/include/asm/hardware/arm_twd.h

-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
-#endif

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -24,6 +24,8 @@
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
+#define L2X0_TAG_LATENCY_CTRL		0x108
+#define L2X0_DATA_LATENCY_CTRL		0x10C
 #define L2X0_EVENT_CNT_CTRL		0x200
 #define L2X0_EVENT_CNT1_CFG		0x204
 #define L2X0_EVENT_CNT0_CFG		0x208

arch/arm/include/asm/hardware/pl080.h

+/* arch/arm/include/asm/hardware/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra controll register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#define PL080_INT_STATUS			(0x00)
+#define PL080_TC_STATUS				(0x04)
+#define PL080_TC_CLEAR				(0x08)
+#define PL080_ERR_STATUS			(0x0C)
+#define PL080_ERR_CLEAR				(0x10)
+#define PL080_RAW_TC_STATUS			(0x14)
+#define PL080_RAW_ERR_STATUS			(0x18)
+#define PL080_EN_CHAN				(0x1c)
+#define PL080_SOFT_BREQ				(0x20)
+#define PL080_SOFT_SREQ				(0x24)
+#define PL080_SOFT_LBREQ			(0x28)
+#define PL080_SOFT_LSREQ			(0x2C)
+
+#define PL080_CONFIG				(0x30)
+#define PL080_CONFIG_M2_BE			(1 << 2)
+#define PL080_CONFIG_M1_BE			(1 << 1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_SYNC				(0x34)
+
+/* Per channel configuration registers */
+
+#define PL008_Cx_STRIDE				(0x20)
+#define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x)				((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x)			((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x)			((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR			(0x00)
+#define PL080_CH_DST_ADDR			(0x04)
+#define PL080_CH_LLI				(0x08)
+#define PL080_CH_CONTROL			(0x0C)
+#define PL080_CH_CONFIG				(0x10)
+#define PL080S_CH_CONTROL2			(0x10)
+#define PL080S_CH_CONFIG			(0x14)
+
+#define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT			(2)
+#define PL080_LLI_LM_AHB2			(1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
+#define PL080_CONTROL_PROT_MASK			(0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT		(28)
+#define PL080_CONTROL_PROT_SYS			(1 << 28)
+#define PL080_CONTROL_DST_INCR			(1 << 27)
+#define PL080_CONTROL_SRC_INCR			(1 << 26)
+#define PL080_CONTROL_DST_AHB2			(1 << 25)
+#define PL080_CONTROL_SRC_AHB2			(1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT		(21)
+#define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT		(18)
+#define PL080_CONTROL_DB_SIZE_MASK		(0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT		(15)
+#define PL080_CONTROL_SB_SIZE_MASK		(0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT		(12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK	(0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)
+
+#define PL080_BSIZE_1				(0x0)
+#define PL080_BSIZE_4				(0x1)
+#define PL080_BSIZE_8				(0x2)
+#define PL080_BSIZE_16				(0x3)
+#define PL080_BSIZE_32				(0x4)
+#define PL080_BSIZE_64				(0x5)
+#define PL080_BSIZE_128				(0x6)
+#define PL080_BSIZE_256				(0x7)
+
+#define PL080_WIDTH_8BIT			(0x0)
+#define PL080_WIDTH_16BIT			(0x1)
+#define PL080_WIDTH_32BIT			(0x2)
+
+#define PL080_CONFIG_HALT			(1 << 18)
+#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
+#define PL080_CONFIG_LOCK			(1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
+#define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT		(6)
+#define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT		(1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_FLOW_MEM2MEM			(0x0)
+#define PL080_FLOW_MEM2PER			(0x1)
+#define PL080_FLOW_PER2MEM			(0x2)
+#define PL080_FLOW_SRC2DST			(0x3)
+#define PL080_FLOW_SRC2DST_DST			(0x4)
+#define PL080_FLOW_MEM2PER_PER			(0x5)
+#define PL080_FLOW_PER2MEM_PER			(0x6)
+#define PL080_FLOW_SRC2DST_SRC			(0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+};
+
+struct pl080s_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+	u32	control1;
+};
+

arch/arm/include/asm/hardware/vic.h

@@ -41,7 +41,7 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
 #endif
 
 #endif

arch/arm/include/asm/localtimer.h

+/*
+ *  arch/arm/include/asm/localtimer.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_LOCALTIMER_H
+#define __ASM_ARM_LOCALTIMER_H
+
+struct clock_event_device;
+
+/*
+ * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
+ */
+void percpu_timer_setup(void);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#ifdef CONFIG_HAVE_ARM_TWD
+
+#include "smp_twd.h"
+
+#define local_timer_ack()	twd_timer_ack()
+#define local_timer_stop()	twd_timer_stop()
+
+#else
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ.
+ * Returns true if the local timer IRQ is to be processed.
+ */
+int local_timer_ack(void);
+
+/*
+ * Stop a local timer interrupt.
+ */
+void local_timer_stop(void);
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+void local_timer_setup(struct clock_event_device *);
+
+#else
+
+static inline void local_timer_stop(void)
+{
+}
+
+#endif
+
+#endif

arch/arm/include/asm/mach/map.h

@@ -30,6 +30,14 @@ struct map_desc {
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+			const struct mem_type *mtype);
 #else
 #define iotable_init(map,num)	do { } while (0)
 #endif

arch/arm/include/asm/pgtable.h

@@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 	return __va(ptr);
 }
 
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
 /*
  * Conversion functions: convert a page and protection to a page entry,

arch/arm/include/asm/processor.h

@@ -71,6 +71,7 @@ struct thread_struct {
 		regs->ARM_cpsr = USR26_MODE;				\
 	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
 		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_cpsr |= PSR_ENDSTATE;					\
 	regs->ARM_pc = pc & ~1;		/* pc */			\
 	regs->ARM_sp = sp;		/* sp */			\
 	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\

arch/arm/include/asm/ptrace.h

@@ -50,6 +50,7 @@
 #define PSR_F_BIT	0x00000040
 #define PSR_I_BIT	0x00000080
 #define PSR_A_BIT	0x00000100
+#define PSR_E_BIT	0x00000200
 #define PSR_J_BIT	0x01000000
 #define PSR_Q_BIT	0x08000000
 #define PSR_V_BIT	0x10000000
@@ -65,6 +66,22 @@
 #define PSR_x		0x0000ff00	/* Extension		*/
 #define PSR_c		0x000000ff	/* Control		*/
 
+/*
+ * ARMv7 groups of APSR bits
+ */
+#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
+#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE	PSR_E_BIT
+#else
+#define PSR_ENDSTATE	0
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*

arch/arm/include/asm/sizes.h

@@ -29,6 +29,7 @@
 #define SZ_512				0x00000200
 
 #define SZ_1K                           0x00000400
+#define SZ_2K                           0x00000800
 #define SZ_4K                           0x00001000
 #define SZ_8K                           0x00002000
 #define SZ_16K                          0x00004000

arch/arm/include/asm/smp.h

@@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p);
 asmlinkage void do_IPI(struct pt_regs *regs);
 
 /*
- * Setup the SMP cpu_possible_map
+ * Setup the set of possible CPUs (via set_cpu_possible)
  */
 extern void smp_init_cpus(void);
 
@@ -55,11 +55,6 @@ extern void smp_store_cpu_info(unsigned int cpuid);
  */
 extern void smp_cross_call(const struct cpumask *mask);
 
-/*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(const struct cpumask *mask);
-
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
  * This also gives us the initial stack to use for this CPU.
@@ -100,44 +95,9 @@ extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 #define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
-/*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(void);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(void);
-
 /*
  * show local interrupt info
  */
 extern void show_local_irqs(struct seq_file *);
 
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
 #endif /* ifndef __ASM_ARM_SMP_H */

arch/arm/include/asm/smp_scu.h

+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
+
+#endif

arch/arm/include/asm/smp_twd.h

+#ifndef __ASMARM_SMP_TWD_H
+#define __ASMARM_SMP_TWD_H
+
+struct clock_event_device;
+
+extern void __iomem *twd_base;
+
+void twd_timer_stop(void);
+int twd_timer_ack(void);
+void twd_timer_setup(struct clock_event_device *);
+
+#endif

arch/arm/include/asm/uaccess.h

@@ -386,7 +386,9 @@ do {									\
 #ifdef CONFIG_MMU
 extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
 extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n);
 extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
 #else
 #define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
 #define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)

arch/arm/kernel/Makefile

@@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
+obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o

arch/arm/kernel/entry-armv.S

@@ -482,6 +482,9 @@ __und_usr:
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r0, r0				@ little endian instruction
+#endif
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7

arch/arm/kernel/entry-common.S

@@ -210,6 +210,9 @@ ENTRY(vector_swi)
   A710(	teq	ip, #0x0f000000						)
   A710(	bne	.Larm710bug						)
 #endif
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	rev	r10, r10			@ little endian instruction
+#endif
 
 #elif defined(CONFIG_AEABI)
 

arch/arm/kernel/process.c

@@ -365,7 +365,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)do_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }

arch/arm/kernel/vmlinux.lds.S

@@ -141,6 +141,7 @@ SECTIONS
 
 	.data : AT(__data_loc) {
 		_data = .;		/* address in memory */
+		_sdata = .;
 
 		/*
 		 * first, the init task union, aligned
@@ -192,6 +193,7 @@ SECTIONS
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
 		*(COMMON)
+		__bss_stop = .;
 		_end = .;
 	}
 					/* Stabs debugging sections.	*/