arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU

As we have all necessary parts to enable the DE2 CCU on the Allwinner
A64 SoC, add the needed device tree nodes, including the DE2 CCU itself
and the DE2 bus.

The "mixer0-lcd0" simplefb device node is updated to use the DE2 CCU.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -43,9 +43,11 @@
  */
 
 #include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
 
 / {
@@ -58,17 +60,12 @@
 		#size-cells = <1>;
 		ranges;
 
-/*
- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
- * However there is no support for this clock on A64 yet, so we depend
- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
- */
 		simplefb_lcd: framebuffer-lcd {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "mixer0-lcd0";
 			clocks = <&ccu CLK_TCON0>,
-				 <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
+				 <&display_clocks CLK_MIXER0>;
 			status = "disabled";
 		};
 	};
@@ -169,6 +166,27 @@
 		#size-cells = <1>;
 		ranges;
 
+		de2@1000000 {
+			compatible = "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-a64-de2-clk";
+				reg = <0x0 0x100000>;
+				clocks = <&ccu CLK_DE>,
+					 <&ccu CLK_BUS_DE>;
+				clock-names = "mod",
+					      "bus";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
 		syscon: syscon@1c00000 {
 			compatible = "allwinner,sun50i-a64-system-control";
 			reg = <0x01c00000 0x1000>;