Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 6
Star 0
Fork 0
K
Kernel
提交 2ba73b1d 编写于 作者: M Matthias Fuchs 提交者： Paul Mackerras
浏览文件
操作

[POWERPC] ppc32: fix CPCI405 board support 

Hi,

this patch brings the CPCI405 board support up to date and fixes several
outstanding issues:

       -add bios_fixup()
       -enable RTC only when CONFIG_GEN_RTC defined
       -corrected CompactPCI interrupt map
       -added cpci405_early_serial_map for correct UART clocking
       -removed unused code

Matthias
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 4312dc76
隐藏空白更改
内联 并排
Showing with 140 addition and 31 deletion
arch/ppc/platforms/4xx/Kconfig
浏览文件 @ 2ba73b1d
......@@ -183,7 +183,7 @@ config IBM_EMAC4
config BIOS_FIXUP
bool
depends on BUBINGA || EP405 || SYCAMORE || WALNUT
depends on BUBINGA || EP405 || SYCAMORE || WALNUT || CPCI405
default y
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
......
arch/ppc/platforms/4xx/cpci405.c
浏览文件 @ 2ba73b1d
/*
* Board setup routines for the esd CPCI-405 cPCI Board.
*
* Author: Stefan Roese
* stefan.roese@esd-electronics.com
* Copyright 2001-2006 esd electronic system design - hannover germany
*
* Copyright 2001 esd electronic system design - hannover germany
* Authors: Matthias Fuchs
* matthias.fuchs@esd-electronics.com
* Stefan Roese
* stefan.roese@esd-electronics.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -20,9 +22,17 @@
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/todc.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/ocp.h>
#include <asm/ibm_ocp_pci.h>
#include <platforms/4xx/ibm405gp.h>
#ifdef CONFIG_GEN_RTC
void *cpci405_nvram;
#endif
extern bd_t __res;
/*
* Some IRQs unique to CPCI-405.
......@@ -36,18 +46,69 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
* A B C D
*/
{
{28, 28, 28, 28}, /* IDSEL 15 - cPCI slot 8 */
{29, 29, 29, 29}, /* IDSEL 16 - cPCI slot 7 */
{30, 30, 30, 30}, /* IDSEL 17 - cPCI slot 6 */
{27, 27, 27, 27}, /* IDSEL 18 - cPCI slot 5 */
{28, 28, 28, 28}, /* IDSEL 19 - cPCI slot 4 */
{29, 29, 29, 29}, /* IDSEL 20 - cPCI slot 3 */
{30, 30, 30, 30}, /* IDSEL 21 - cPCI slot 2 */
{28, 29, 30, 27}, /* IDSEL 15 - cPCI slot 8 */
{29, 30, 27, 28}, /* IDSEL 16 - cPCI slot 7 */
{30, 27, 28, 29}, /* IDSEL 17 - cPCI slot 6 */
{27, 28, 29, 30}, /* IDSEL 18 - cPCI slot 5 */
{28, 29, 30, 27}, /* IDSEL 19 - cPCI slot 4 */
{29, 30, 27, 28}, /* IDSEL 20 - cPCI slot 3 */
{30, 27, 28, 29}, /* IDSEL 21 - cPCI slot 2 */
};
const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
/* The serial clock for the chip is an internal clock determined by
* different clock speeds/dividers.
* Calculate the proper input baud rate and setup the serial driver.
*/
static void __init
cpci405_early_serial_map(void)
{
u32 uart_div;
int uart_clock;
struct uart_port port;
/* Calculate the serial clock input frequency
*
* The uart clock is the cpu frequency (provided in the board info
* structure) divided by the external UART Divisor.
*/
uart_div = ((mfdcr(DCRN_CHCR_BASE) & CHR0_UDIV) >> 1) + 1;
uart_clock = __res.bi_procfreq / uart_div;
/* Setup serial port access */
memset(&port, 0, sizeof(port));
#if defined(CONFIG_UART0_TTYS0)
port.membase = (void*)UART0_IO_BASE;
port.irq = UART0_INT;
#else
port.membase = (void*)UART1_IO_BASE;
port.irq = UART1_INT;
#endif
port.uartclk = uart_clock;
port.regshift = 0;
port.iotype = UPIO_MEM;
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 0 failed\n");
}
#if defined(CONFIG_UART0_TTYS0)
port.membase = (void*)UART1_IO_BASE;
port.irq = UART1_INT;
#else
port.membase = (void*)UART0_IO_BASE;
port.irq = UART0_INT;
#endif
port.line = 1;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 1 failed\n");
}
}
void __init
cpci405_setup_arch(void)
{
......@@ -55,14 +116,68 @@ cpci405_setup_arch(void)
ibm_ocp_set_emac(0, 0);
TODC_INIT(TODC_TYPE_MK48T35, cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
cpci405_early_serial_map();
#ifdef CONFIG_GEN_RTC
TODC_INIT(TODC_TYPE_MK48T35,
cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
#endif
}
void __init
bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
{
unsigned int bar_response, bar;
/* Disable region first */
out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
/* PLB starting addr, PCI: 0x80000000 */
out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
/* PCI start addr, 0x80000000 */
out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
/* 512MB range of PLB to PCI */
out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
/* Enable no pre-fetch, enable region */
out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
(PPC405_PCI_UPPER_MEM -
PPC405_PCI_MEM_BASE)) | 0x01));
/* Disable region one */
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
out_le32((void *) &(pcip->ptm1ms), 0x00000001);
/* Disable region two */
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
out_le32((void *) &(pcip->ptm2ms), 0x00000000);
out_le32((void *) &(pcip->ptm2la), 0x00000000);
/* Zero config bars */
for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
early_write_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
0x00000000);
early_read_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
&bar_response);
}
}
void __init
cpci405_map_io(void)
{
ppc4xx_map_io();
#ifdef CONFIG_GEN_RTC
cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE);
#endif
}
void __init
......@@ -74,9 +189,11 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.setup_arch = cpci405_setup_arch;
ppc_md.setup_io_mappings = cpci405_map_io;
#ifdef CONFIG_GEN_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#endif
}
arch/ppc/platforms/4xx/cpci405.h
浏览文件 @ 2ba73b1d
/*
* CPCI-405 board specific definitions
*
* Copyright (c) 2001 Stefan Roese (stefan.roese@esd-electronics.com)
* Copyright 2001-2006 esd electronic system design - hannover germany
*
* Authors: Matthias Fuchs
* matthias.fuchs@esd-electronics.com
* Stefan Roese
* stefan.roese@esd-electronics.com
*/
#ifdef __KERNEL__
#ifndef __ASM_CPCI405_H__
#define __ASM_CPCI405_H__
#ifndef __CPCI405_H__
#define __CPCI405_H__
#include <linux/config.h>
/* We have a 405GP core */
#include <platforms/4xx/ibm405gp.h>
#include <asm/ppcboot.h>
#ifndef __ASSEMBLY__
/* Some 4xx parts use a different timebase frequency from the internal clock.
*/
#define bi_tbfreq bi_intfreq
/* Map for the NVRAM space */
#define CPCI405_NVRAM_PADDR ((uint)0xf0200000)
#define CPCI405_NVRAM_SIZE ((uint)32*1024)
#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
#define BASE_BAUD 201600
#else
#define BASE_BAUD 691200
#endif
#define BASE_BAUD 0
#define PPC4xx_MACHINE_NAME "esd CPCI-405"
#define PPC4xx_MACHINE_NAME "esd CPCI-405"
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_CPCI405_H__ */
#endif /* __CPCI405_H__ */
#endif /* __KERNEL__ */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或