mx5: enable usb gadget for freescale mx51 babbage board

This patch enables usb gadget for freescale mx51 babbage hw. By default,
the OTG port will be in device mode. To put the OTG port into Host mode,
pass "otg_mode=host" in the exec command.

This patch applies to 2.6.34-rc7.
Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -15,6 +15,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/fsl_devices.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -179,12 +180,32 @@ static struct mxc_usbh_platform_data dr_utmi_config = {
 	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
 static struct mxc_usbh_platform_data usbh1_config = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
+static int otg_mode_host;
+
+static int __init babbage_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", babbage_otg_mode);
+
 /*
  * Board specific initialization.
  */
@@ -197,7 +218,12 @@ static void __init mxc_board_init(void)
 	mxc_init_imx_uart();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
 
 	gpio_usbh1_active();
 	mxc_register_device(&mxc_usbh1_device, &usbh1_config);

arch/arm/mach-mx5/clock-mx51.c

@@ -818,6 +818,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
 };
 
 static void clk_tree_init(void)

arch/arm/mach-mx5/devices.c

@@ -107,6 +107,18 @@ static struct resource usbotg_resources[] = {
 	},
 };
 
+/* OTG gadget device */
+struct platform_device mxc_usbdr_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(usbotg_resources),
+	.resource	= usbotg_resources,
+	.dev		= {
+		.dma_mask		= &usb_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
 struct platform_device mxc_usbdr_host_device = {
 	.name = "mxc-ehci",
 	.id = 0,

arch/arm/mach-mx5/devices.h

@@ -4,3 +4,4 @@ extern struct platform_device mxc_uart_device2;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_usbdr_host_device;
 extern struct platform_device mxc_usbh1_device;
+extern struct platform_device mxc_usbdr_udc_device;