提交 2a8ff459 编写于 作者: N Nobuhiro Iwamatsu 提交者: Paul Mundt

sh: Solution Engine SH7705 board and CPU updates.

This fixes up SH7705 CPU support and the SE7705 board
for some of the recent changes.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 005a336e
......@@ -33,7 +33,7 @@ config EARLY_SCIF_CONSOLE_PORT
default "0xffe00000" if CPU_SUBTYPE_SH7780
default "0xfffe9800" if CPU_SUBTYPE_SH7206
default "0xf8420000" if CPU_SUBTYPE_SH7619
default "0xa4400000" if CPU_SUBTYPE_SH7712
default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
default "0xffe80000" if CPU_SH4
config EARLY_PRINTK
......
......@@ -65,24 +65,24 @@ static struct ipr_data se770x_ipr_map[] = {
* 8: rtc
* 12: mouse
* 14: ide0
*/
*/
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
/* This is default value */
{ 0xf-0x2, 0, 8, 0x2 , BCR_ILCRA},
{ 0xf-0xa, 0, 4, 0xa , BCR_ILCRA},
{ 0xf-0x5, 0, 0, 0x5 , BCR_ILCRB},
{ 0xf-0x8, 0, 4, 0x8 , BCR_ILCRC},
{ 0xf-0xc, 0, 0, 0xc , BCR_ILCRC},
{ 0xf-0xe, 0, 12, 0xe , BCR_ILCRD},
{ 0xf-0x3, 0, 4, 0x3 , BCR_ILCRD}, /* LAN */
{ 0xf-0xd, 0, 8, 0xd , BCR_ILCRE},
{ 0xf-0x9, 0, 4, 0x9 , BCR_ILCRE},
{ 0xf-0x1, 0, 0, 0x1 , BCR_ILCRE},
{ 0xf-0xf, 0, 12, 0xf , BCR_ILCRF},
{ 0xf-0xb, 0, 4, 0xb , BCR_ILCRF},
{ 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG},
{ 0xf-0x6, 0, 8, 0x6 , BCR_ILCRG},
{ 0xf-0x4, 0, 4, 0x4 , BCR_ILCRG},
{ 13, 0, 8, 0x0f-13 ,BCR_ILCRA},
{ 5 , 0, 4, 0x0f- 5 ,BCR_ILCRA},
{ 10, 0, 0, 0x0f-10, BCR_ILCRB},
{ 7 , 0, 4, 0x0f- 7, BCR_ILCRC},
{ 3 , 0, 0, 0x0f- 3, BCR_ILCRC},
{ 1 , 0, 12, 0x0f- 1, BCR_ILCRD},
{ 12, 0, 4, 0x0f-12, BCR_ILCRD}, /* LAN */
{ 2 , 0, 8, 0x0f- 2, BCR_ILCRE}, /* PCIRQ2 */
{ 6 , 0, 4, 0x0f- 6, BCR_ILCRE}, /* PCIRQ1 */
{ 14, 0, 0, 0x0f-14, BCR_ILCRE}, /* PCIRQ0 */
{ 0 , 0, 12, 0x0f , BCR_ILCRF},
{ 4 , 0, 4, 0x0f- 4, BCR_ILCRF},
{ 8 , 0, 12, 0x0f- 8, BCR_ILCRG},
{ 9 , 0, 8, 0x0f- 9, BCR_ILCRG},
{ 11, 0, 4, 0x0f-11, BCR_ILCRG},
#else
{ 14, 0, 8, 0x0f-14 ,BCR_ILCRA},
{ 12, 0, 4, 0x0f-12 ,BCR_ILCRA},
......
......@@ -76,7 +76,7 @@ static struct resource cf_ide_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
.start = 7,
.start = IRQ_CFCARD,
.flags = IORESOURCE_IRQ,
},
};
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Tue Oct 3 12:03:04 2006
# Linux kernel version: 2.6.21-rc5
# Thu Apr 26 09:16:31 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
......@@ -33,7 +39,9 @@ CONFIG_LOCALVERSION_AUTO=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
......@@ -91,27 +99,30 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_SOLUTION_ENGINE=y
# CONFIG_SH_7751_SOLUTION_ENGINE is not set
# CONFIG_SH_7780_SOLUTION_ENGINE is not set
# CONFIG_SH_7300_SOLUTION_ENGINE is not set
# CONFIG_SH_7343_SOLUTION_ENGINE is not set
# CONFIG_SH_73180_SOLUTION_ENGINE is not set
# CONFIG_SH_7722_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_HP6XX is not set
# CONFIG_SH_EC3104 is not set
# CONFIG_SH_SATURN is not set
# CONFIG_SH_DREAMCAST is not set
# CONFIG_SH_BIGSUR is not set
# CONFIG_SH_MPC1211 is not set
# CONFIG_SH_SH03 is not set
# CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set
# CONFIG_SH_7710VOIPGW is not set
# CONFIG_SH_RTS7751R2D is not set
# CONFIG_SH_R7780RP is not set
# CONFIG_SH_HIGHLANDER is not set
# CONFIG_SH_EDOSK7705 is not set
# CONFIG_SH_SH4202_MICRODEV is not set
# CONFIG_SH_LANDISK is not set
# CONFIG_SH_TITAN is not set
# CONFIG_SH_SHMIN is not set
# CONFIG_SH_7206_SOLUTION_ENGINE is not set
# CONFIG_SH_7619_SOLUTION_ENGINE is not set
# CONFIG_SH_LBOX_RE2 is not set
# CONFIG_SH_UNKNOWN is not set
#
......@@ -123,6 +134,12 @@ CONFIG_CPU_SH3=y
# SH-2 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
#
# SH-2A Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7206 is not set
#
# SH-3 Processor Support
......@@ -134,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
#
# SH-4 Processor Support
......@@ -158,12 +176,14 @@ CONFIG_CPU_SUBTYPE_SH7705=y
#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
#
# SH4AL-DSP Processor Support
#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
......@@ -173,6 +193,11 @@ CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
......@@ -182,6 +207,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
#
# Cache configuration
......@@ -190,23 +216,31 @@ CONFIG_SH7705_CACHE_32KB=y
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
# CONFIG_CF_ENABLER is not set
CONFIG_CF_ENABLER=y
# CONFIG_CF_AREA5 is not set
CONFIG_CF_AREA6=y
# CONFIG_CF_AREA4 is not set
CONFIG_CF_BASE_ADDR=0xb8000000
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set
# CONFIG_SH_ADC is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_PINT_IRQ=y
CONFIG_CPU_HAS_IPR_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
#
# Timer support
# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
#
......@@ -223,13 +257,19 @@ CONFIG_SH_PCLK_FREQ=33333333
# Companion Chips
#
# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
#
CONFIG_HEARTBEAT=y
# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
......@@ -287,6 +327,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
......@@ -307,11 +348,13 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
......@@ -388,6 +431,7 @@ CONFIG_MTD_PARTITIONS=y
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
......@@ -461,6 +505,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
......@@ -472,10 +517,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
#
# ATA/ATAPI/MFM/RLL support
#
......@@ -649,17 +697,12 @@ CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
......@@ -675,6 +718,7 @@ CONFIG_HW_RANDOM=y
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
......@@ -683,18 +727,19 @@ CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
......@@ -704,7 +749,7 @@ CONFIG_VIDEO_V4L2=y
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
#
......@@ -712,6 +757,12 @@ CONFIG_FIRMWARE_EDID=y
#
# CONFIG_SOUND is not set
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
#
......@@ -772,6 +823,14 @@ CONFIG_FIRMWARE_EDID=y
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
#
# File systems
#
......@@ -779,10 +838,12 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
......@@ -828,7 +889,6 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
......@@ -877,6 +937,10 @@ CONFIG_MSDOS_PARTITION=y
#
# CONFIG_NLS is not set
#
# Distributed Lock Manager
#
#
# Profiling support
#
......@@ -885,15 +949,18 @@ CONFIG_MSDOS_PARTITION=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_KGDB is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_SH_KGDB is not set
#
# Security options
......@@ -908,6 +975,7 @@ CONFIG_LOG_BUF_SHIFT=14
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
......@@ -915,3 +983,5 @@ CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
......@@ -4,6 +4,6 @@
obj-y += imask.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o
obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o
......@@ -18,6 +18,58 @@
#include <asm/io.h>
#include <asm/machvec.h>
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#define INTC_INTER 0xA4000014UL
#define INTC_IPRD 0xA4000018UL
#define INTC_ICR2 0xA4000012UL
/* PFC */
#define PORT_PACR 0xA4000100UL
#define PORT_PBCR 0xA4000102UL
#define PORT_PCCR 0xA4000104UL
#define PORT_PDCR 0xA4000106UL
#define PORT_PECR 0xA4000108UL
#define PORT_PFCR 0xA400010AUL
#define PORT_PGCR 0xA400010CUL
#define PORT_PHCR 0xA400010EUL
#define PORT_PJCR 0xA4000110UL
#define PORT_PKCR 0xA4000112UL
#define PORT_PLCR 0xA4000114UL
#define PORT_PMCR 0xA4000118UL
#define PORT_PNCR 0xA400011AUL
#define PORT_PECR2 0xA4050148UL
#define PORT_PFCR2 0xA405014AUL
#define PORT_PNCR2 0xA405015AUL
/* I/O port */
#define PORT_PADR 0xA4000120UL
#define PORT_PBDR 0xA4000122UL
#define PORT_PCDR 0xA4000124UL
#define PORT_PDDR 0xA4000126UL
#define PORT_PEDR 0xA4000128UL
#define PORT_PFDR 0xA400012AUL
#define PORT_PGDR 0xA400012CUL
#define PORT_PHDR 0xA400012EUL
#define PORT_PJDR 0xA4000130UL
#define PORT_PKDR 0xA4000132UL
#define PORT_PLDR 0xA4000134UL
#define PORT_PMDR 0xA4000138UL
#define PORT_PNDR 0xA400013AUL
#define PINT0_IRQ 40
#define PINT8_IRQ 41
#define PINT_IRQ_BASE 86
#define PINT0_IPR_ADDR INTC_IPRD
#define PINT0_IPR_POS 3
#define PINT0_PRIORITY 2
#define PINT8_IPR_ADDR INTC_IPRD
#define PINT8_IPR_POS 2
#define PINT8_PRIORITY 2
#endif /* CONFIG_CPU_SUBTYPE_SH7705 */
static unsigned char pint_map[256];
static unsigned long portcr_mask;
......@@ -126,7 +178,7 @@ int ipr_irq_demux(int irq)
unsigned long creg, dreg, d, sav;
if (irq == PINT0_IRQ) {
#if defined(CONFIG_CPU_SUBTYPE_SH7707)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707)
creg = PORT_PACR;
dreg = PORT_PADR;
#else
......@@ -144,7 +196,7 @@ int ipr_irq_demux(int irq)
return PINT_IRQ_BASE + pint_map[d];
} else if (irq == PINT8_IRQ) {
#if defined(CONFIG_CPU_SUBTYPE_SH7707)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707)
creg = PORT_PBCR;
dreg = PORT_PBDR;
#else
......
......@@ -2,6 +2,7 @@
* SH7705 Setup
*
* Copyright (C) 2006 Paul Mundt
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
......@@ -14,15 +15,15 @@
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xa4400000,
.mapbase = 0xa4410000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 52, 53, 55, 54 },
.irqs = { 56, 57, 59 },
}, {
.mapbase = 0xa4410000,
.mapbase = 0xa4400000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 56, 57, 59, 58 },
.irqs = { 52, 53, 55 },
}, {
.flags = 0,
}
......@@ -46,3 +47,48 @@ static int __init sh7705_devices_setup(void)
ARRAY_SIZE(sh7705_devices));
}
__initcall(sh7705_devices_setup);
static struct ipr_data sh7705_ipr_map[] = {
/* IRQ, IPR-idx, shift, priority */
{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
{ 17, 0, 8, 2 }, /* TMU1 TUNI */
{ 18, 0, 4, 2 }, /* TMU2 TUNI */
{ 27, 1, 12, 2 }, /* WDT ITI */
{ 20, 0, 0, 2 }, /* RTC ATI (alarm) */
{ 21, 0, 0, 2 }, /* RTC PRI (period) */
{ 22, 0, 0, 2 }, /* RTC CUI (carry) */
{ 48, 4, 12, 7 }, /* DMAC DMTE0 */
{ 49, 4, 12, 7 }, /* DMAC DMTE1 */
{ 50, 4, 12, 7 }, /* DMAC DMTE2 */
{ 51, 4, 12, 7 }, /* DMAC DMTE3 */
{ 52, 4, 8, 3 }, /* SCIF0 ERI */
{ 53, 4, 8, 3 }, /* SCIF0 RXI */
{ 55, 4, 8, 3 }, /* SCIF0 TXI */
{ 56, 4, 4, 3 }, /* SCIF1 ERI */
{ 57, 4, 4, 3 }, /* SCIF1 RXI */
{ 59, 4, 4, 3 }, /* SCIF1 TXI */
};
static unsigned long ipr_offsets[] = {
0xFFFFFEE2 /* 0: IPRA */
, 0xFFFFFEE4 /* 1: IPRB */
, 0xA4000016 /* 2: IPRC */
, 0xA4000018 /* 3: IPRD */
, 0xA400001A /* 4: IPRE */
, 0xA4080000 /* 5: IPRF */
, 0xA4080002 /* 6: IPRG */
, 0xA4080004 /* 7: IPRH */
};
/* given the IPR index return the address of the IPR register */
unsigned int map_ipridx_to_addr(int idx)
{
if (idx >= ARRAY_SIZE(ipr_offsets))
return 0;
return ipr_offsets[idx];
}
void __init init_IRQ_ipr()
{
make_ipr_irq(sh7705_ipr_map, ARRAY_SIZE(sh7705_ipr_map));
}
......@@ -67,6 +67,7 @@ config CPU_SUBTYPE_SH7300
config CPU_SUBTYPE_SH7705
bool "Support SH7705 processor"
select CPU_SH3
select CPU_HAS_IPR_IRQ
select CPU_HAS_PINT_IRQ
config CPU_SUBTYPE_SH7706
......
......@@ -69,11 +69,12 @@
#define BCR_ILCRG (PA_BCR + 12)
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#define IRQ_STNIC 12
#define IRQ_STNIC 12
#define IRQ_CFCARD 14
#else
#define IRQ_STNIC 10
#define IRQ_CFCARD 7
#endif
#define IRQ_CFCARD 7
#define __IO_PREFIX se
#include <asm/io_generic.h>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册