dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs

Some Texas Instruments K3 family of SoCs have one of more Digital Signal
Processor (DSP) subsystems that are comprised of either a TMS320C66x
CorePac and/or a next-generation TMS320C71x CorePac processor subsystem.
Add the device tree bindings document for the C66x DSP devices on these
SoCs. The added example illustrates the DT nodes for the first C66x DSP
device present on the K3 J721E family of SoCs.
Signed-off-by: NSuman Anna <s-anna@ti.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200721223617.20312-5-s-anna@ti.comSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 DSP devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems
+  that are used to offload some of the processor-intensive tasks or algorithms,
+  for achieving various system level goals.
+
+  These processor sub-systems usually contain additional sub-modules like
+  L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
+  controller, a dedicated local power/sleep controller etc. The DSP processor
+  cores in the K3 SoCs are usually either a TMS320C66x CorePac processor or a
+  TMS320C71x CorePac processor.
+
+  Each DSP Core sub-system is represented as a single DT node. Each node has a
+  number of required or optional properties that enable the OS running on the
+  host processor (Arm CorePac) to perform the device management of the remote
+  processor and to communicate with the remote processor.
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  compatible:
+    const: ti,j721e-c66-dsp
+    description:
+      Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs
+
+  reg:
+    items:
+      - description: Address and Size of the L2 SRAM internal memory region
+      - description: Address and Size of the L1 PRAM internal memory region
+      - description: Address and Size of the L1 DRAM internal memory region
+
+  reg-names:
+    items:
+      - const: l2sram
+      - const: l1pram
+      - const: l1dram
+
+  resets:
+    description: |
+      Should contain the phandle to the reset controller node managing the
+      local resets for this device, and a reset specifier.
+    maxItems: 1
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  mboxes:
+    description: |
+      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+      communication with the remote processor. This property should match
+      with the sub-mailbox node used in the firmware image.
+    maxItems: 1
+
+  memory-region:
+    minItems: 2
+    maxItems: 8
+    description: |
+      phandle to the reserved memory nodes to be associated with the remoteproc
+      device. There should be at least two reserved memory nodes defined. The
+      reserved memory nodes should be carveout nodes, and should be defined as
+      per the bindings in
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+    items:
+      - description: region used for dynamic DMA allocations like vrings and
+                     vring buffers
+      - description: region reserved for firmware image sections
+    additionalItems: true
+
+# Optional properties:
+# --------------------
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    description: |
+      phandles to one or more reserved on-chip SRAM regions. The regions
+      should be defined as child nodes of the respective SRAM node, and
+      should be defined as per the generic bindings in,
+      Documentation/devicetree/bindings/sram/sram.yaml
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-proc-ids
+ - resets
+ - firmware-name
+ - mboxes
+ - memory-region
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    / {
+        model = "Texas Instruments K3 J721E SoC";
+        compatible = "ti,j721e";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        bus@100000 {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+                     <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+                     <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>; /* C66_1 */
+
+            /* J721E C66_0 DSP node */
+            dsp@4d80800000 {
+                compatible = "ti,j721e-c66-dsp";
+                reg = <0x4d 0x80800000 0x00 0x00048000>,
+                      <0x4d 0x80e00000 0x00 0x00008000>,
+                      <0x4d 0x80f00000 0x00 0x00008000>;
+                reg-names = "l2sram", "l1pram", "l1dram";
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <142>;
+                ti,sci-proc-ids = <0x03 0xFF>;
+                resets = <&k3_reset 142 1>;
+                firmware-name = "j7-c66_0-fw";
+                memory-region = <&c66_0_dma_memory_region>,
+                                <&c66_0_memory_region>;
+                mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+            };
+        };
+    };