x86/entry/64: Migrate 64-bit and compat syscalls to the new exit handlers and...

x86/entry/64: Migrate 64-bit and compat syscalls to the new exit handlers and remove old assembly code

These need to be migrated together, as the compat case used to
jump into the middle of the 64-bit exit code.

Remove the old assembly code.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/d4d1d70de08ac3640badf50048a9e8f18fe2497f.1435952415.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

arch/x86/entry/entry_64.S

@@ -229,6 +229,11 @@ entry_SYSCALL_64_fastpath:
 	 */
 	USERGS_SYSRET64
 
+GLOBAL(int_ret_from_sys_call_irqs_off)
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_NONE)
+	jmp int_ret_from_sys_call
+
 	/* Do syscall entry tracing */
 tracesys:
 	movq	%rsp, %rdi
@@ -272,69 +277,11 @@ tracesys_phase2:
  * Has correct iret frame.
  */
 GLOBAL(int_ret_from_sys_call)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-int_ret_from_sys_call_irqs_off: /* jumps come here from the irqs-off SYSRET path */
-	TRACE_IRQS_OFF
-	movl	$_TIF_ALLWORK_MASK, %edi
-	/* edi:	mask to check */
-GLOBAL(int_with_check)
-	LOCKDEP_SYS_EXIT_IRQ
-	GET_THREAD_INFO(%rcx)
-	movl	TI_flags(%rcx), %edx
-	andl	%edi, %edx
-	jnz	int_careful
-	andl	$~TS_COMPAT, TI_status(%rcx)
-	jmp	syscall_return
-
-	/*
-	 * Either reschedule or signal or syscall exit tracking needed.
-	 * First do a reschedule test.
-	 * edx:	work, edi: workmask
-	 */
-int_careful:
-	bt	$TIF_NEED_RESCHED, %edx
-	jnc	int_very_careful
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq	%rdi
-	SCHEDULE_USER
-	popq	%rdi
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp	int_with_check
-
-	/* handle signals and tracing -- both require a full pt_regs */
-int_very_careful:
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_EXTRA_REGS
-	/* Check for syscall exit trace */
-	testl	$_TIF_WORK_SYSCALL_EXIT, %edx
-	jz	int_signal
-	pushq	%rdi
-	leaq	8(%rsp), %rdi			/* &ptregs -> arg1 */
-	call	syscall_trace_leave
-	popq	%rdi
-	andl	$~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU), %edi
-	jmp	int_restore_rest
-
-int_signal:
-	testl	$_TIF_DO_NOTIFY_MASK, %edx
-	jz	1f
-	movq	%rsp, %rdi			/* &ptregs -> arg1 */
-	xorl	%esi, %esi			/* oldset -> arg2 */
-	call	do_notify_resume
-1:	movl	$_TIF_WORK_MASK, %edi
-int_restore_rest:
+	movq	%rsp, %rdi
+	call	syscall_return_slowpath	/* returns with IRQs disabled */
 	RESTORE_EXTRA_REGS
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp	int_with_check
-
-syscall_return:
-	/* The IRETQ could re-enable interrupts: */
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_IRETQ
+	TRACE_IRQS_IRETQ		/* we're about to change IF */
 
 	/*
 	 * Try to use SYSRET instead of IRET if we're returning to

arch/x86/entry/entry_64_compat.S

@@ -210,10 +210,10 @@ sysexit_from_sys_call:
 	.endm
 
 	.macro auditsys_exit exit
-	testl	$(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz	ia32_ret_from_sys_call
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
+	testl	$(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jnz	ia32_ret_from_sys_call
 	movl	%eax, %esi		/* second arg, syscall return value */
 	cmpl	$-MAX_ERRNO, %eax	/* is it an error ? */
 	jbe	1f
@@ -232,7 +232,7 @@ sysexit_from_sys_call:
 	movq	%rax, R10(%rsp)
 	movq	%rax, R9(%rsp)
 	movq	%rax, R8(%rsp)
-	jmp	int_with_check
+	jmp	int_ret_from_sys_call_irqs_off
 	.endm
 
 sysenter_auditsys: