提交 295d4cd8 编写于 作者: J Jiri Kosina 提交者: Kalle Valo

iwlwifi: don't call netif_napi_add() with rxq->lock held (was Re: Lockdep...

iwlwifi: don't call netif_napi_add() with rxq->lock held (was Re: Lockdep warning in iwl_pcie_rx_handle())

We can't call netif_napi_add() with rxq-lock held, as there is a potential
for deadlock as spotted by lockdep (see below). rxq->lock is not
protecting anything over the netif_napi_add() codepath anyway, so let's
drop it just before calling into NAPI.

 ========================================================
 WARNING: possible irq lock inversion dependency detected
 5.12.0-rc1-00002-gbada49429032 #5 Not tainted
 --------------------------------------------------------
 irq/136-iwlwifi/565 just changed the state of lock:
 ffff89f28433b0b0 (&rxq->lock){+.-.}-{2:2}, at: iwl_pcie_rx_handle+0x7f/0x960 [iwlwifi]
 but this lock took another, SOFTIRQ-unsafe lock in the past:
  (napi_hash_lock){+.+.}-{2:2}

 and interrupts could create inverse lock ordering between them.

 other info that might help us debug this:
  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(napi_hash_lock);
                                local_irq_disable();
                                lock(&rxq->lock);
                                lock(napi_hash_lock);
   <Interrupt>
     lock(&rxq->lock);

  *** DEADLOCK ***

 1 lock held by irq/136-iwlwifi/565:
  #0: ffff89f2b1440170 (sync_cmd_lockdep_map){+.+.}-{0:0}, at: iwl_pcie_irq_handler+0x5/0xb30

 the shortest dependencies between 2nd lock and 1st lock:
  -> (napi_hash_lock){+.+.}-{2:2} {
     HARDIRQ-ON-W at:
                       lock_acquire+0x277/0x3d0
                       _raw_spin_lock+0x2c/0x40
                       netif_napi_add+0x14b/0x270
                       e1000_probe+0x2fe/0xee0 [e1000e]
                       local_pci_probe+0x42/0x90
                       pci_device_probe+0x10b/0x1c0
                       really_probe+0xef/0x4b0
                       driver_probe_device+0xde/0x150
                       device_driver_attach+0x4f/0x60
                       __driver_attach+0x9c/0x140
                       bus_for_each_dev+0x79/0xc0
                       bus_add_driver+0x18d/0x220
                       driver_register+0x5b/0xf0
                       do_one_initcall+0x5b/0x300
                       do_init_module+0x5b/0x21c
                       load_module+0x1dae/0x22c0
                       __do_sys_finit_module+0xad/0x110
                       do_syscall_64+0x33/0x80
                       entry_SYSCALL_64_after_hwframe+0x44/0xae
     SOFTIRQ-ON-W at:
                       lock_acquire+0x277/0x3d0
                       _raw_spin_lock+0x2c/0x40
                       netif_napi_add+0x14b/0x270
                       e1000_probe+0x2fe/0xee0 [e1000e]
                       local_pci_probe+0x42/0x90
                       pci_device_probe+0x10b/0x1c0
                       really_probe+0xef/0x4b0
                       driver_probe_device+0xde/0x150
                       device_driver_attach+0x4f/0x60
                       __driver_attach+0x9c/0x140
                       bus_for_each_dev+0x79/0xc0
                       bus_add_driver+0x18d/0x220
                       driver_register+0x5b/0xf0
                       do_one_initcall+0x5b/0x300
                       do_init_module+0x5b/0x21c
                       load_module+0x1dae/0x22c0
                       __do_sys_finit_module+0xad/0x110
                       do_syscall_64+0x33/0x80
                       entry_SYSCALL_64_after_hwframe+0x44/0xae
     INITIAL USE at:
                      lock_acquire+0x277/0x3d0
                      _raw_spin_lock+0x2c/0x40
                      netif_napi_add+0x14b/0x270
                      e1000_probe+0x2fe/0xee0 [e1000e]
                      local_pci_probe+0x42/0x90
                      pci_device_probe+0x10b/0x1c0
                      really_probe+0xef/0x4b0
                      driver_probe_device+0xde/0x150
                      device_driver_attach+0x4f/0x60
                      __driver_attach+0x9c/0x140
                      bus_for_each_dev+0x79/0xc0
                      bus_add_driver+0x18d/0x220
                      driver_register+0x5b/0xf0
                      do_one_initcall+0x5b/0x300
                      do_init_module+0x5b/0x21c
                      load_module+0x1dae/0x22c0
                      __do_sys_finit_module+0xad/0x110
                      do_syscall_64+0x33/0x80
                      entry_SYSCALL_64_after_hwframe+0x44/0xae
   }
   ... key      at: [<ffffffffae84ef38>] napi_hash_lock+0x18/0x40
   ... acquired at:
    _raw_spin_lock+0x2c/0x40
    netif_napi_add+0x14b/0x270
    _iwl_pcie_rx_init+0x1f4/0x710 [iwlwifi]
    iwl_pcie_rx_init+0x1b/0x3b0 [iwlwifi]
    iwl_trans_pcie_start_fw+0x2ac/0x6a0 [iwlwifi]
    iwl_mvm_load_ucode_wait_alive+0x116/0x460 [iwlmvm]
    iwl_run_init_mvm_ucode+0xa4/0x3a0 [iwlmvm]
    iwl_op_mode_mvm_start+0x9ed/0xbf0 [iwlmvm]
    _iwl_op_mode_start.isra.4+0x42/0x80 [iwlwifi]
    iwl_opmode_register+0x71/0xe0 [iwlwifi]
    iwl_mvm_init+0x34/0x1000 [iwlmvm]
    do_one_initcall+0x5b/0x300
    do_init_module+0x5b/0x21c
    load_module+0x1dae/0x22c0
    __do_sys_finit_module+0xad/0x110
    do_syscall_64+0x33/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

[ ... lockdep output trimmed .... ]

Fixes: 25edc8f2 ("iwlwifi: pcie: properly implement NAPI")
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021134060.12405@cbobk.fhfr.pm
上级 436b2656
......@@ -1129,6 +1129,8 @@ static int _iwl_pcie_rx_init(struct iwl_trans *trans)
iwl_pcie_rx_init_rxb_lists(rxq);
spin_unlock_bh(&rxq->lock);
if (!rxq->napi.poll) {
int (*poll)(struct napi_struct *, int) = iwl_pcie_napi_poll;
......@@ -1149,7 +1151,6 @@ static int _iwl_pcie_rx_init(struct iwl_trans *trans)
napi_enable(&rxq->napi);
}
spin_unlock_bh(&rxq->lock);
}
/* move the pool to the default queue and allocator ownerships */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册