mips/PCI: replace pci_probe_only with pci_flags

Some architectures (alpha, mips, powerpc) have an arch-specific
"pci_probe_only" flag.  Others use PCI_PROBE_ONLY in pci_flags for
the same purpose.  This moves mips to the pci_flags approach so
generic code can use the same test across all architectures.

CC: Ralf Baechle <ralf@linux-mips.org>
CC: linux-mips@linux-mips.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

arch/mips/include/asm/pci.h

@@ -92,6 +92,7 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 #include <asm/scatterlist.h>
 #include <linux/string.h>
 #include <asm/io.h>
+#include <asm-generic/pci-bridge.h>
 
 struct pci_dev;
 
@@ -145,8 +146,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 #define arch_setup_msi_irqs arch_setup_msi_irqs
 #endif
 
-extern int pci_probe_only;
-
 extern char * (*pcibios_plat_setup)(char *str);
 
 #endif /* _ASM_PCI_H */

arch/mips/pci/pci-bcm1480.c

@@ -204,7 +204,7 @@ static int __init bcm1480_pcibios_init(void)
 	uint64_t reg;
 
 	/* CFE will assign PCI resources */
-	pci_probe_only = 1;
+	pci_set_flags(PCI_PROBE_ONLY);
 
 	/* Avoid ISA compat ranges.  */
 	PCIBIOS_MIN_IO = 0x00008000UL;

arch/mips/pci/pci-ip27.c

@@ -50,7 +50,7 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
 	bridge_t *bridge;
 	int slot;
 
-	pci_probe_only = 1;
+	pci_set_flags(PCI_PROBE_ONLY);
 
 	printk("a bridge\n");
 

arch/mips/pci/pci-lantiq.c

@@ -270,7 +270,8 @@ static int __devinit ltq_pci_probe(struct platform_device *pdev)
 {
 	struct ltq_pci_data *ltq_pci_data =
 		(struct ltq_pci_data *) pdev->dev.platform_data;
-	pci_probe_only = 0;
+
+	pci_clear_flags(PCI_PROBE_ONLY);
 	ltq_pci_irq_map = ltq_pci_data->irq;
 	ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
 	ltq_pci_mapped_cfg =

arch/mips/pci/pci-sb1250.c

@@ -213,7 +213,7 @@ static int __init sb1250_pcibios_init(void)
 	uint64_t reg;
 
 	/* CFE will assign PCI resources */
-	pci_probe_only = 1;
+	pci_set_flags(PCI_PROBE_ONLY);
 
 	/* Avoid ISA compat ranges.  */
 	PCIBIOS_MIN_IO = 0x00008000UL;

arch/mips/pci/pci-xlr.c

@@ -292,7 +292,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 static int __init pcibios_init(void)
 {
 	/* PSB assigns PCI resources */
-	pci_probe_only = 1;
+	pci_set_flags(PCI_PROBE_ONLY);
 	pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20);
 
 	/* Extend IO port for memory mapped io */

arch/mips/pci/pci.c

@@ -20,12 +20,9 @@
 #include <asm/cpu-info.h>
 
 /*
- * Indicate whether we respect the PCI setup left by the firmware.
- *
- * Make this long-lived  so that we know when shutting down
- * whether we probed only or not.
+ * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
+ * assignments.
  */
-int pci_probe_only;
 
 #define PCI_ASSIGN_ALL_BUSSES	1
 
@@ -92,7 +89,7 @@ static void __devinit pcibios_scanbus(struct pci_controller *hose)
 	if (!hose->iommu)
 		PCI_DMA_BUS_IS_PHYS = 1;
 
-	if (hose->get_busno && pci_probe_only)
+	if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
 		next_busno = (*hose->get_busno)();
 
 	pci_add_resource(&resources, hose->mem_resource);
@@ -115,7 +112,7 @@ static void __devinit pcibios_scanbus(struct pci_controller *hose)
 			need_domain_info = 1;
 		}
 
-		if (!pci_probe_only) {
+		if (!pci_has_flag(PCI_PROBE_ONLY)) {
 			pci_bus_size_bridges(bus);
 			pci_bus_assign_resources(bus);
 			pci_enable_bridges(bus);
@@ -282,7 +279,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 	struct list_head *ln;
 	struct pci_dev *dev = bus->self;
 
-	if (pci_probe_only && dev &&
+	if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
 	    (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		pci_read_bridge_bases(bus);
 		pcibios_fixup_device_resources(dev, bus);