提交 28c5fe99 编写于 作者: F Felix Brack 提交者: Jacek Anaszewski

leds: pca9532: Extend pca9532 device tree support

This patch extends the device tree support for the pca9532 by adding
the leds 'default-state' property.
Signed-off-by: NFelix Brack <fb@ltec.ch>
Signed-off-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>
上级 cd3b0b05
......@@ -17,6 +17,8 @@ Optional sub-node properties:
- label: see Documentation/devicetree/bindings/leds/common.txt
- type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
- default-state: see Documentation/devicetree/bindings/leds/common.txt
This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>.
Example:
#include <dt-bindings/leds/leds-pca9532.h>
......@@ -33,6 +35,14 @@ Example:
label = "pca:green:power";
type = <PCA9532_TYPE_LED>;
};
kernel-booting {
type = <PCA9532_TYPE_LED>;
default-state = "on";
};
sys-stat {
type = <PCA9532_TYPE_LED>;
default-state = "keep"; // don't touch, was set by U-Boot
};
};
For more product information please see the link below:
......
......@@ -254,6 +254,21 @@ static void pca9532_input_work(struct work_struct *work)
mutex_unlock(&data->update_lock);
}
static enum pca9532_state pca9532_getled(struct pca9532_led *led)
{
struct i2c_client *client = led->client;
struct pca9532_data *data = i2c_get_clientdata(client);
u8 maxleds = data->chip_info->num_leds;
char reg;
enum pca9532_state ret;
mutex_lock(&data->update_lock);
reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id));
ret = reg >> LED_NUM(led->id)/2;
mutex_unlock(&data->update_lock);
return ret;
}
#ifdef CONFIG_LEDS_PCA9532_GPIO
static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
{
......@@ -366,7 +381,10 @@ static int pca9532_configure(struct i2c_client *client,
gpios++;
break;
case PCA9532_TYPE_LED:
led->state = pled->state;
if (pled->state == PCA9532_KEEP)
led->state = pca9532_getled(led);
else
led->state = pled->state;
led->name = pled->name;
led->ldev.name = led->name;
led->ldev.default_trigger = pled->default_trigger;
......@@ -456,6 +474,7 @@ pca9532_of_populate_pdata(struct device *dev, struct device_node *np)
const struct of_device_id *match;
int devid, maxleds;
int i = 0;
const char *state;
match = of_match_device(of_pca9532_leds_match, dev);
if (!match)
......@@ -475,6 +494,12 @@ pca9532_of_populate_pdata(struct device *dev, struct device_node *np)
of_property_read_u32(child, "type", &pdata->leds[i].type);
of_property_read_string(child, "linux,default-trigger",
&pdata->leds[i].default_trigger);
if (!of_property_read_string(child, "default-state", &state)) {
if (!strcmp(state, "on"))
pdata->leds[i].state = PCA9532_ON;
else if (!strcmp(state, "keep"))
pdata->leds[i].state = PCA9532_KEEP;
}
if (++i >= maxleds) {
of_node_put(child);
break;
......
......@@ -22,7 +22,8 @@ enum pca9532_state {
PCA9532_OFF = 0x0,
PCA9532_ON = 0x1,
PCA9532_PWM0 = 0x2,
PCA9532_PWM1 = 0x3
PCA9532_PWM1 = 0x3,
PCA9532_KEEP = 0xff,
};
struct pca9532_led {
......@@ -44,4 +45,3 @@ struct pca9532_platform_data {
};
#endif /* __LINUX_PCA9532_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册