p54: Move eeprom header

Copy the eeprom code from p54common.h into a new file eeprom.h
Signed-off-by: NChristian Lamparter <chunkeey@web.de>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/p54/eeprom.h

+/*
+ * eeprom specific definitions for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ *   Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * - LMAC API interface header file for STLC4560 (lmac_longbow.h)
+ *   Copyright (C) 2007 Conexant Systems, Inc.
+ *
+ * - islmvc driver
+ *   Copyright (C) 2001 Intersil Americas Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef EEPROM_H
+#define EEPROM_H
+
+/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
+
+struct pda_entry {
+	__le16 len;	/* includes both code and data */
+	__le16 code;
+	u8 data[0];
+} __packed;
+
+struct eeprom_pda_wrap {
+	__le32 magic;
+	__le16 pad;
+	__le16 len;
+	__le32 arm_opcode;
+	u8 data[0];
+} __packed;
+
+struct p54_iq_autocal_entry {
+	__le16 iq_param[4];
+} __packed;
+
+struct pda_iq_autocal_entry {
+	__le16 freq;
+	struct p54_iq_autocal_entry params;
+} __packed;
+
+struct pda_channel_output_limit {
+	__le16 freq;
+	u8 val_bpsk;
+	u8 val_qpsk;
+	u8 val_16qam;
+	u8 val_64qam;
+	u8 rate_set_mask;
+	u8 rate_set_size;
+} __packed;
+
+struct pda_pa_curve_data_sample_rev0 {
+	u8 rf_power;
+	u8 pa_detector;
+	u8 pcv;
+} __packed;
+
+struct pda_pa_curve_data_sample_rev1 {
+	u8 rf_power;
+	u8 pa_detector;
+	u8 data_barker;
+	u8 data_bpsk;
+	u8 data_qpsk;
+	u8 data_16qam;
+	u8 data_64qam;
+} __packed;
+
+struct pda_pa_curve_data {
+	u8 cal_method_rev;
+	u8 channels;
+	u8 points_per_channel;
+	u8 padding;
+	u8 data[0];
+} __packed;
+
+struct pda_rssi_cal_entry {
+	__le16 mul;
+	__le16 add;
+} __packed;
+
+struct pda_country {
+	u8 regdomain;
+	u8 alpha2[2];
+	u8 flags;
+} __packed;
+
+struct pda_antenna_gain {
+	struct {
+		u8 gain_5GHz;	/* 0.25 dBi units */
+		u8 gain_2GHz;	/* 0.25 dBi units */
+	} __packed antenna[0];
+} __packed;
+
+struct pda_custom_wrapper {
+	__le16 entries;
+	__le16 entry_size;
+	__le16 offset;
+	__le16 len;
+	u8 data[0];
+} __packed;
+
+/*
+ * this defines the PDR codes used to build PDAs as defined in document
+ * number 553155. The current implementation mirrors version 1.1 of the
+ * document and lists only PDRs supported by the ARM platform.
+ */
+
+/* common and choice range (0x0000 - 0x0fff) */
+#define PDR_END					0x0000
+#define PDR_MANUFACTURING_PART_NUMBER		0x0001
+#define PDR_PDA_VERSION				0x0002
+#define PDR_NIC_SERIAL_NUMBER			0x0003
+#define PDR_NIC_RAM_SIZE			0x0005
+#define PDR_RFMODEM_SUP_RANGE			0x0006
+#define PDR_PRISM_MAC_SUP_RANGE			0x0007
+#define PDR_NIC_ID				0x0008
+
+#define PDR_MAC_ADDRESS				0x0101
+#define PDR_REGULATORY_DOMAIN_LIST		0x0103 /* obsolete */
+#define PDR_ALLOWED_CHAN_SET			0x0104
+#define PDR_DEFAULT_CHAN			0x0105
+#define PDR_TEMPERATURE_TYPE			0x0107
+
+#define PDR_IFR_SETTING				0x0200
+#define PDR_RFR_SETTING				0x0201
+#define PDR_3861_BASELINE_REG_SETTINGS		0x0202
+#define PDR_3861_SHADOW_REG_SETTINGS		0x0203
+#define PDR_3861_IFRF_REG_SETTINGS		0x0204
+
+#define PDR_3861_CHAN_CALIB_SET_POINTS		0x0300
+#define PDR_3861_CHAN_CALIB_INTEGRATOR		0x0301
+
+#define PDR_3842_PRISM_II_NIC_CONFIG		0x0400
+#define PDR_PRISM_USB_ID			0x0401
+#define PDR_PRISM_PCI_ID			0x0402
+#define PDR_PRISM_PCI_IF_CONFIG			0x0403
+#define PDR_PRISM_PCI_PM_CONFIG			0x0404
+
+#define PDR_3861_MF_TEST_CHAN_SET_POINTS	0x0900
+#define PDR_3861_MF_TEST_CHAN_INTEGRATORS	0x0901
+
+/* ARM range (0x1000 - 0x1fff) */
+#define PDR_COUNTRY_INFORMATION			0x1000 /* obsolete */
+#define PDR_INTERFACE_LIST			0x1001
+#define PDR_HARDWARE_PLATFORM_COMPONENT_ID	0x1002
+#define PDR_OEM_NAME				0x1003
+#define PDR_PRODUCT_NAME			0x1004
+#define PDR_UTF8_OEM_NAME			0x1005
+#define PDR_UTF8_PRODUCT_NAME			0x1006
+#define PDR_COUNTRY_LIST			0x1007
+#define PDR_DEFAULT_COUNTRY			0x1008
+
+#define PDR_ANTENNA_GAIN			0x1100
+
+#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA	0x1901
+#define PDR_RSSI_LINEAR_APPROXIMATION		0x1902
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS	0x1903
+#define PDR_PRISM_PA_CAL_CURVE_DATA		0x1904
+#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND	0x1905
+#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION		0x1906
+#define PDR_REGULATORY_POWER_LIMITS		0x1907
+#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED	0x1908
+#define PDR_RADIATED_TRANSMISSION_CORRECTION	0x1909
+#define PDR_PRISM_TX_IQ_CALIBRATION		0x190a
+
+/* reserved range (0x2000 - 0x7fff) */
+
+/* customer range (0x8000 - 0xffff) */
+#define PDR_BASEBAND_REGISTERS				0x8000
+#define PDR_PER_CHANNEL_BASEBAND_REGISTERS		0x8001
+
+/* used by our modificated eeprom image */
+#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM		0xDEAD
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM	0xBEEF
+#define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM		0xB05D
+
+/* Interface Definitions */
+#define PDR_INTERFACE_ROLE_SERVER	0x0000
+#define PDR_INTERFACE_ROLE_CLIENT	0x0001
+
+/* PDR definitions for default country & country list */
+#define PDR_COUNTRY_CERT_CODE		0x80
+#define PDR_COUNTRY_CERT_CODE_REAL	0x00
+#define PDR_COUNTRY_CERT_CODE_PSEUDO	0x80
+#define PDR_COUNTRY_CERT_BAND		0x40
+#define PDR_COUNTRY_CERT_BAND_2GHZ	0x00
+#define PDR_COUNTRY_CERT_BAND_5GHZ	0x40
+#define PDR_COUNTRY_CERT_IODOOR		0x30
+#define PDR_COUNTRY_CERT_IODOOR_BOTH	0x00
+#define PDR_COUNTRY_CERT_IODOOR_INDOOR	0x20
+#define PDR_COUNTRY_CERT_IODOOR_OUTDOOR	0x30
+#define PDR_COUNTRY_CERT_INDEX		0x0f
+
+/* Specific LMAC FW/HW variant definitions */
+#define PDR_SYNTH_FRONTEND_MASK		0x0007
+#define PDR_SYNTH_FRONTEND_DUETTE3	0x0001
+#define PDR_SYNTH_FRONTEND_DUETTE2	0x0002
+#define PDR_SYNTH_FRONTEND_FRISBEE	0x0003
+#define PDR_SYNTH_FRONTEND_XBOW		0x0004
+#define PDR_SYNTH_FRONTEND_LONGBOW	0x0005
+#define PDR_SYNTH_IQ_CAL_MASK		0x0018
+#define PDR_SYNTH_IQ_CAL_PA_DETECTOR	0x0000
+#define PDR_SYNTH_IQ_CAL_DISABLED	0x0008
+#define PDR_SYNTH_IQ_CAL_ZIF		0x0010
+#define PDR_SYNTH_FAA_SWITCH_MASK	0x0020
+#define PDR_SYNTH_FAA_SWITCH_ENABLED	0x0020
+#define PDR_SYNTH_24_GHZ_MASK		0x0040
+#define PDR_SYNTH_24_GHZ_DISABLED	0x0040
+#define PDR_SYNTH_5_GHZ_MASK		0x0080
+#define PDR_SYNTH_5_GHZ_DISABLED	0x0080
+#define PDR_SYNTH_RX_DIV_MASK		0x0100
+#define PDR_SYNTH_RX_DIV_SUPPORTED	0x0100
+#define PDR_SYNTH_TX_DIV_MASK		0x0200
+#define PDR_SYNTH_TX_DIV_SUPPORTED	0x0200
+#define PDR_SYNTH_ASM_MASK		0x0400
+#define PDR_SYNTH_ASM_XSWON		0x0400
+
+#endif /* EEPROM_H */