usb: dwc2: Move reset into dwc2_get_hwparams()

The reset is required to get reset values of the hardware parameters but
the force mode is not. Move the base reset into dwc2_get_hwparams() and
do the reset and force mode afterwards.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

drivers/usb/dwc2/core.c

@@ -3120,6 +3120,9 @@ void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
 /**
  * During device initialization, read various hardware configuration
  * registers and interpret the contents.
+ *
+ * This should be called during driver probe. It will perform a core
+ * soft reset in order to get the reset values of the parameters.
  */
 int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 {
@@ -3128,6 +3131,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 	u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
 	u32 hptxfsiz, grxfsiz, gnptxfsiz;
 	u32 gusbcfg = 0;
+	int retval;
 
 	/*
 	 * Attempt to ensure this device is really a DWC_otg Controller.
@@ -3147,6 +3151,10 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
 		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
 
+	retval = dwc2_core_reset(hsotg);
+	if (retval)
+		return retval;
+
 	hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
 	hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
 	hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);

drivers/usb/dwc2/platform.c

@@ -512,13 +512,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	if (retval)
 		return retval;
 
-	/*
-	 * Reset before dwc2_get_hwparams() then it could get power-on real
-	 * reset value form registers.
-	 */
-	dwc2_core_reset_and_force_dr_mode(hsotg);
-
-	/* Detect config values from hardware */
+	/* Reset the controller and detect hardware config values */
 	retval = dwc2_get_hwparams(hsotg);
 	if (retval)
 		goto error;
@@ -526,6 +520,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	/* Validate parameter values */
 	dwc2_set_parameters(hsotg, params);
 
+	dwc2_core_reset_and_force_dr_mode(hsotg);
+
 	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
 		retval = dwc2_gadget_init(hsotg, irq);
 		if (retval)