提交 2503a0fe 编写于 作者: K Kumar, Mahesh 提交者: Maarten Lankhorst

drm/i915/bxt+: Enable IPC support

This patch adds IPC support. This patch also enables IPC in all supported
platforms based on has_ipc flag.
IPC (Isochronous Priority Control) is the hardware feature, which
dynamically controls the memory read priority of Display.

When IPC is enabled, plane read requests are sent at high priority until
filling above the transition watermark, then the requests are sent at
lower priority until dropping below the level 0 watermark.
The lower priority requests allow other memory clients to have better
memory access. When IPC is disabled, all plane read requests are sent at
high priority.

Changes since V1:
 - Remove commandline parameter to disable ipc
 - Address Paulo's comments
Changes since V2:
 - Address review comments
 - Set ipc_enabled flag
Changes since V3:
 - move ipc_enabled flag assignment inside intel_ipc_enable function
Changes since V4:
 - Re-enable IPC after suspend/resume
Changes since V5:
 - Enable IPC for all gen >=9 except SKL
Changes since V6:
 - fix commit msg
 - after resume program IPC based on SW state.
Changes since V7:
 - Modify IPC support check based on HAS_IPC macro (suggested by Chris)
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-8-mahesh1.kumar@intel.com
上级 e57f1c02
......@@ -1341,7 +1341,7 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
intel_runtime_pm_enable(dev_priv);
dev_priv->ipc_enabled = false;
intel_init_ipc(dev_priv);
if (IS_ENABLED(CONFIG_DRM_I915_DEBUG))
DRM_INFO("DRM_I915_DEBUG enabled\n");
......@@ -2609,6 +2609,8 @@ static int intel_runtime_resume(struct device *kdev)
if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
intel_hpd_init(dev_priv);
intel_enable_ipc(dev_priv);
enable_rpm_wakeref_asserts(dev_priv);
if (ret)
......
......@@ -6949,6 +6949,7 @@ enum {
#define DISP_FBC_WM_DIS (1<<15)
#define DISP_ARB_CTL2 _MMIO(0x45004)
#define DISP_DATA_PARTITION_5_6 (1<<6)
#define DISP_IPC_ENABLE (1<<3)
#define DBUF_CTL _MMIO(0x45008)
#define DBUF_POWER_REQUEST (1<<31)
#define DBUF_POWER_STATE (1<<30)
......
......@@ -15255,6 +15255,7 @@ void intel_display_resume(struct drm_device *dev)
if (!ret)
ret = __intel_display_resume(dev, state, &ctx);
intel_enable_ipc(dev_priv);
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
......
......@@ -1898,6 +1898,8 @@ bool ilk_disable_lp_wm(struct drm_device *dev);
int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6);
int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
struct intel_crtc_state *cstate);
void intel_init_ipc(struct drm_i915_private *dev_priv);
void intel_enable_ipc(struct drm_i915_private *dev_priv);
static inline int intel_enable_rc6(void)
{
return i915.enable_rc6;
......
......@@ -5824,6 +5824,30 @@ void intel_update_watermarks(struct intel_crtc *crtc)
dev_priv->display.update_wm(crtc);
}
void intel_enable_ipc(struct drm_i915_private *dev_priv)
{
u32 val;
val = I915_READ(DISP_ARB_CTL2);
if (dev_priv->ipc_enabled)
val |= DISP_IPC_ENABLE;
else
val &= ~DISP_IPC_ENABLE;
I915_WRITE(DISP_ARB_CTL2, val);
}
void intel_init_ipc(struct drm_i915_private *dev_priv)
{
dev_priv->ipc_enabled = false;
if (!HAS_IPC(dev_priv))
return;
dev_priv->ipc_enabled = true;
intel_enable_ipc(dev_priv);
}
/*
* Lock protecting IPS related data structures
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册