提交 22256b0a 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: dsa: b53: Move EEE functions to b53

Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared
code amongst Gigabit capable switch, only 5325 and 5365 are too old to support
that.
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 909d812a
......@@ -1531,6 +1531,69 @@ void b53_mirror_del(struct dsa_switch *ds, int port,
}
EXPORT_SYMBOL(b53_mirror_del);
void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
{
struct b53_device *dev = ds->priv;
u16 reg;
b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
if (enable)
reg |= BIT(port);
else
reg &= ~BIT(port);
b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
}
EXPORT_SYMBOL(b53_eee_enable_set);
/* Returns 0 if EEE was not enabled, or 1 otherwise
*/
int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
{
int ret;
ret = phy_init_eee(phy, 0);
if (ret)
return 0;
b53_eee_enable_set(ds, port, true);
return 1;
}
EXPORT_SYMBOL(b53_eee_init);
int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
{
struct b53_device *dev = ds->priv;
struct ethtool_eee *p = &dev->ports[port].eee;
u16 reg;
if (is5325(dev) || is5365(dev))
return -EOPNOTSUPP;
b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
e->eee_enabled = p->eee_enabled;
e->eee_active = !!(reg & BIT(port));
return 0;
}
EXPORT_SYMBOL(b53_get_mac_eee);
int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
{
struct b53_device *dev = ds->priv;
struct ethtool_eee *p = &dev->ports[port].eee;
if (is5325(dev) || is5365(dev))
return -EOPNOTSUPP;
p->eee_enabled = e->eee_enabled;
b53_eee_enable_set(ds, port, e->eee_enabled);
return 0;
}
EXPORT_SYMBOL(b53_set_mac_eee);
static const struct dsa_switch_ops b53_switch_ops = {
.get_tag_protocol = b53_get_tag_protocol,
.setup = b53_setup,
......
......@@ -70,6 +70,7 @@ enum {
struct b53_port {
u16 vlan_ctl_mask;
struct ethtool_eee eee;
};
struct b53_vlan {
......@@ -310,5 +311,9 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
void b53_mirror_del(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror);
void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable);
int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy);
int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
#endif
......@@ -107,19 +107,6 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
core_writel(priv, reg, offset);
}
static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
u32 reg;
reg = core_readl(priv, CORE_EEE_EN_CTRL);
if (enable)
reg |= 1 << port;
else
reg &= ~(1 << port);
core_writel(priv, reg, CORE_EEE_EN_CTRL);
}
static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
......@@ -256,8 +243,8 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
bcm_sf2_imp_vlan_setup(ds, cpu_port);
/* If EEE was enabled, restore it */
if (priv->port_sts[port].eee.eee_enabled)
bcm_sf2_eee_enable_set(ds, port, true);
if (priv->dev->ports[port].eee.eee_enabled)
b53_eee_enable_set(ds, port, true);
return 0;
}
......@@ -292,47 +279,6 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
}
/* Returns 0 if EEE was not enabled, or 1 otherwise
*/
static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
int ret;
ret = phy_init_eee(phy, 0);
if (ret)
return 0;
bcm_sf2_eee_enable_set(ds, port, true);
return 1;
}
static int bcm_sf2_sw_get_mac_eee(struct dsa_switch *ds, int port,
struct ethtool_eee *e)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_eee *p = &priv->port_sts[port].eee;
u32 reg;
reg = core_readl(priv, CORE_EEE_LPI_INDICATE);
e->eee_enabled = p->eee_enabled;
e->eee_active = !!(reg & (1 << port));
return 0;
}
static int bcm_sf2_sw_set_mac_eee(struct dsa_switch *ds, int port,
struct ethtool_eee *e)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_eee *p = &priv->port_sts[port].eee;
p->eee_enabled = e->eee_enabled;
bcm_sf2_eee_enable_set(ds, port, e->eee_enabled);
return 0;
}
static int bcm_sf2_sw_indir_rw(struct bcm_sf2_priv *priv, int op, int addr,
int regnum, u16 val)
......@@ -567,7 +513,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_eee *p = &priv->port_sts[port].eee;
struct ethtool_eee *p = &priv->dev->ports[port].eee;
u32 id_mode_dis = 0, port_mode;
const char *str = NULL;
u32 reg, offset;
......@@ -649,7 +595,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
core_writel(priv, reg, offset);
if (!phydev->is_pseudo_fixed_link)
p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
p->eee_enabled = b53_eee_init(ds, port, phydev);
}
static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
......@@ -978,8 +924,8 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
.set_wol = bcm_sf2_sw_set_wol,
.port_enable = bcm_sf2_port_setup,
.port_disable = bcm_sf2_port_disable,
.get_mac_eee = bcm_sf2_sw_get_mac_eee,
.set_mac_eee = bcm_sf2_sw_set_mac_eee,
.get_mac_eee = b53_get_mac_eee,
.set_mac_eee = b53_set_mac_eee,
.port_bridge_join = b53_br_join,
.port_bridge_leave = b53_br_leave,
.port_stp_state_set = b53_br_set_stp_state,
......
......@@ -48,8 +48,6 @@ struct bcm_sf2_hw_params {
struct bcm_sf2_port_status {
unsigned int link;
struct ethtool_eee eee;
};
struct bcm_sf2_cfp_priv {
......
......@@ -244,9 +244,6 @@ enum bcm_sf2_reg_offs {
#define CORE_JOIN_ALL_VLAN_EN 0xd140
#define CORE_EEE_EN_CTRL 0x24800
#define CORE_EEE_LPI_INDICATE 0x24810
#define CORE_CFP_ACC 0x28000
#define OP_STR_DONE (1 << 0)
#define OP_SEL_SHIFT 1
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册