Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (79 commits)
  [X25]: Use proc_create() to setup ->proc_fops first
  [WANROUTER]: Use proc_create() to setup ->proc_fops first
  [8021Q]: Use proc_create() to setup ->proc_fops first
  [IPV4]: Use proc_create() to setup ->proc_fops first
  [IPV6]: Use proc_create() to setup ->proc_fops first
  [SCTP]: Use proc_create() to setup ->proc_fops first
  [PKTGEN]: Use proc_create() to setup ->proc_fops first
  [NEIGHBOUR]: Use proc_create() to setup ->proc_fops first
  [LLC]: Use proc_create() to setup ->proc_fops first
  [IPX]: Use proc_create() to setup ->proc_fops first
  [SUNRPC]: Use proc_create() to setup ->proc_fops first
  [ATM]: Use proc_create() to setup ->proc_fops first
  [SCTP]: Update AUTH structures to match declarations in draft-16.
  [SCTP]: Incorrect length was used in SCTP_*_AUTH_CHUNKS socket option
  [SCTP]: Clean up naming conventions of sctp protocol/address family registration
  [APPLETALK]: Use proc_create() to setup ->proc_fops first
  [BNX2X]: add bnx2x to MAINTAINERS
  [BNX2X]: update version, remove CVS strings
  [BNX2X]: Fix Xmit bugs
  [BNX2X]: Prevent PCI queue overflow
  ...

MAINTAINERS

@@ -982,6 +982,12 @@ M:	mchan@broadcom.com
 L:	netdev@vger.kernel.org
 S:	Supported
 
+BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
+P:	Eliezer Tamir
+M:	eliezert@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 P:	Michael Chan
 M:	mchan@broadcom.com
@@ -3886,10 +3892,13 @@ M:	trivial@kernel.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
-TULIP NETWORK DRIVER
-L:	tulip-users@lists.sourceforge.net
-W:	http://sourceforge.net/projects/tulip/
-S:	Orphan
+TULIP NETWORK DRIVERS
+P:	Grant Grundler
+M:	grundler@parisc-linux.org
+P:	Kyle McMartin
+M:	kyle@parisc-linux.org
+L:	netdev@vger.kernel.org
+S:	Maintained
 
 TUN/TAP driver
 P:	Maxim Krasnyansky

drivers/connector/connector.c

@@ -47,7 +47,7 @@ static LIST_HEAD(notify_list);
 
 static struct cn_dev cdev;
 
-int cn_already_initialized = 0;
+static int cn_already_initialized;
 
 /*
  * msg->seq and msg->ack are used to determine message genealogy.

drivers/net/Kconfig

@@ -90,6 +90,11 @@ config MACVLAN
 	  This allows one to create virtual interfaces that map packets to
 	  or from specific MAC addresses to a particular interface.
 
+	  Macvlan devices can be added using the "ip" command from the
+	  iproute2 package starting with the iproute2-2.6.23 release:
+
+	  "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
+
 	  To compile this driver as a module, choose M here: the module
 	  will be called macvlan.
 
@@ -2363,6 +2368,7 @@ config GELIC_NET
 config GELIC_WIRELESS
        bool "PS3 Wireless support"
        depends on GELIC_NET
+       select WIRELESS_EXT
        help
         This option adds the support for the wireless feature of PS3.
         If you have the wireless-less model of PS3 or have no plan to

drivers/net/bnx2x.h

 /* bnx2x.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +24,8 @@
 #define BNX2X_MSG_STATS 		0x20000 /* was: NETIF_MSG_TIMER */
 #define NETIF_MSG_NVM   		0x40000 /* was: NETIF_MSG_HW */
 #define NETIF_MSG_DMAE  		0x80000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_SP			0x100000 /* was: NETIF_MSG_INTR */
+#define BNX2X_MSG_FP			0x200000 /* was: NETIF_MSG_INTR */
 
 #define DP_LEVEL			KERN_NOTICE     /* was: KERN_DEBUG */
 
@@ -40,6 +42,12 @@
 		__LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
 	} while (0)
 
+/* for logging (never masked) */
+#define BNX2X_LOG(__fmt, __args...) do { \
+	printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \
+		__LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
+	} while (0)
+
 /* before we have a dev->name use dev_info() */
 #define BNX2X_DEV_INFO(__fmt, __args...) do { \
 	if (bp->msglevel & NETIF_MSG_PROBE) \
@@ -423,8 +431,6 @@ struct bnx2x_fastpath {
 #define BNX2X_FP_STATE_OPEN     	0xa0000
 #define BNX2X_FP_STATE_HALTING  	0xb0000
 #define BNX2X_FP_STATE_HALTED   	0xc0000
-#define BNX2X_FP_STATE_DELETED  	0xd0000
-#define BNX2X_FP_STATE_CLOSE_IRQ	0xe0000
 
 	int     		index;
 
@@ -505,7 +511,6 @@ struct bnx2x {
 	struct eth_spe  	*spq;
 	dma_addr_t      	spq_mapping;
 	u16     		spq_prod_idx;
-	u16     		dsb_sp_prod_idx;
 	struct eth_spe  	*spq_prod_bd;
 	struct eth_spe  	*spq_last_bd;
 	u16     		*dsb_sp_prod;
@@ -517,7 +522,7 @@ struct bnx2x {
 	 */
 	u8      		stat_pending;
 
-	/* End of fileds used in the performance code paths */
+	/* End of fields used in the performance code paths */
 
 	int     		panic;
 	int     		msglevel;
@@ -540,8 +545,6 @@ struct bnx2x {
 	spinlock_t      	phy_lock;
 
 	struct work_struct      reset_task;
-	u16     		in_reset_task;
-
 	struct work_struct      sp_task;
 
 	struct timer_list       timer;
@@ -555,7 +558,6 @@ struct bnx2x {
 #define CHIP_ID(bp)     		(((bp)->chip_id) & 0xfffffff0)
 
 #define CHIP_NUM(bp)    		(((bp)->chip_id) & 0xffff0000)
-#define CHIP_NUM_5710   		0x57100000
 
 #define CHIP_REV(bp)    		(((bp)->chip_id) & 0x0000f000)
 #define CHIP_REV_Ax     		0x00000000
@@ -574,7 +576,8 @@ struct bnx2x {
 	u32     		fw_mb;
 
 	u32     		hw_config;
-	u32     		serdes_config;
+	u32			board;
+	u32			serdes_config;
 	u32     		lane_config;
 	u32     		ext_phy_config;
 #define XGXS_EXT_PHY_TYPE(bp)   	(bp->ext_phy_config & \
@@ -595,11 +598,11 @@ struct bnx2x {
 	u8      		tx_lane_swap;
 
 	u8      		link_up;
+	u8			phy_link_up;
 
 	u32     		supported;
 /* link settings - missing defines */
 #define SUPPORTED_2500baseT_Full	(1 << 15)
-#define SUPPORTED_CX4   		(1 << 16)
 
 	u32     		phy_flags;
 /*#define PHY_SERDES_FLAG       		0x1*/
@@ -644,16 +647,9 @@ struct bnx2x {
 #define FLOW_CTRL_BOTH  		PORT_FEATURE_FLOW_CONTROL_BOTH
 #define FLOW_CTRL_NONE  		PORT_FEATURE_FLOW_CONTROL_NONE
 
-	u32     		pause_mode;
-#define PAUSE_NONE      		0
-#define PAUSE_SYMMETRIC 		1
-#define PAUSE_ASYMMETRIC		2
-#define PAUSE_BOTH      		3
-
 	u32     		advertising;
 /* link settings - missing defines */
 #define ADVERTISED_2500baseT_Full       (1 << 15)
-#define ADVERTISED_CX4  		(1 << 16)
 
 	u32     		link_status;
 	u32     		line_speed;
@@ -667,6 +663,8 @@ struct bnx2x {
 #define NVRAM_TIMEOUT_COUNT     	30000
 #define NVRAM_PAGE_SIZE 		256
 
+	u8			wol;
+
 	int     		rx_ring_size;
 
 	u16     		tx_quick_cons_trip_int;
@@ -718,9 +716,6 @@ struct bnx2x {
 #endif
 
 	char    		*name;
-	u16     		bus_speed_mhz;
-	u8      		wol;
-	u8      		pad;
 
 	/* used to synchronize stats collecting */
 	int     		stats_state;
@@ -856,8 +851,8 @@ struct bnx2x {
 #define MAX_SPQ_PENDING 		8
 
 
-#define BNX2X_NUM_STATS 		31
-#define BNX2X_NUM_TESTS 		2
+#define BNX2X_NUM_STATS			34
+#define BNX2X_NUM_TESTS			1
 
 
 #define DPM_TRIGER_TYPE 		0x40
@@ -867,6 +862,15 @@ struct bnx2x {
 		       DPM_TRIGER_TYPE); \
 	} while (0)
 
+/* PCIE link and speed */
+#define PCICFG_LINK_WIDTH		0x1f00000
+#define PCICFG_LINK_WIDTH_SHIFT		20
+#define PCICFG_LINK_SPEED		0xf0000
+#define PCICFG_LINK_SPEED_SHIFT		16
+
+#define BMAC_CONTROL_RX_ENABLE		2
+
+#define pbd_tcp_flags(skb)  	(ntohl(tcp_flag_word(tcp_hdr(skb)))>>16 & 0xff)
 
 /* stuff added to make the code fit 80Col */
 
@@ -939,13 +943,13 @@ struct bnx2x {
 #define LINK_16GTFD     		LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
 #define LINK_16GXFD     		LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
 
-#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \
+#define NIG_STATUS_XGXS0_LINK10G \
 		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
-#define NIG_XGXS0_LINK_STATUS \
+#define NIG_STATUS_XGXS0_LINK_STATUS \
 		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
-#define NIG_XGXS0_LINK_STATUS_SIZE \
+#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
 		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
-#define NIG_SERDES0_LINK_STATUS \
+#define NIG_STATUS_SERDES0_LINK_STATUS \
 		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
 #define NIG_MASK_MI_INT \
 		NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT

drivers/net/bnx2x_fw_defs.h

 /* bnx2x_fw_defs.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/bnx2x_init.h

 /* bnx2x_init.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -409,7 +409,7 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
 
 	pci_read_config_word(bp->pdev,
 			     bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val);
-	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", val);
+	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val);
 	w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
 	r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12);
 
@@ -472,10 +472,14 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
 
 	REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
-	REG_WR(bp, PXP2_REG_RQ_WR_MBS0 + 8, w_order);
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
 	REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
-	REG_WR(bp, PXP2_REG_RQ_RD_MBS0 + 8, r_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
 
+	if (r_order == MAX_RD_ORD)
+		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
 	REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16);
 }
 

drivers/net/e1000e/e1000.h

@@ -42,8 +42,7 @@
 struct e1000_info;
 
 #define ndev_printk(level, netdev, format, arg...) \
-	printk(level "%s: %s: " format, (netdev)->dev.parent->bus_id, \
-	       (netdev)->name, ## arg)
+	printk(level "%s: " format, (netdev)->name, ## arg)
 
 #ifdef DEBUG
 #define ndev_dbg(netdev, format, arg...) \