net: microchip: sparx5: add support for offloading ets qdisc

Add support for offloading ets qdisc to sparx5 switch.

The ets qdisc makes it possible to configure a mix og strict and
bandwidth-sharing bands. The ets qdisc must be attached as a root qdisc.
Signed-off-by: NDaniel Machon <daniel.machon@microchip.com>
Signed-off-by: NSteen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/microchip/sparx5/sparx5_main_regs.h

@@ -3098,6 +3098,21 @@ enum sparx5_target {
 #define HSCH_SE_DLB_SENSE_SE_DLB_DPORT_ENA_GET(x)\
 	FIELD_GET(HSCH_SE_DLB_SENSE_SE_DLB_DPORT_ENA, x)
 
+/*      HSCH:HSCH_DWRR:DWRR_ENTRY */
+#define HSCH_DWRR_ENTRY(g)        __REG(TARGET_HSCH, 0, 1, 162816, g, 72, 4, 0, 0, 1, 4)
+
+#define HSCH_DWRR_ENTRY_DWRR_COST                GENMASK(24, 20)
+#define HSCH_DWRR_ENTRY_DWRR_COST_SET(x)\
+	FIELD_PREP(HSCH_DWRR_ENTRY_DWRR_COST, x)
+#define HSCH_DWRR_ENTRY_DWRR_COST_GET(x)\
+	FIELD_GET(HSCH_DWRR_ENTRY_DWRR_COST, x)
+
+#define HSCH_DWRR_ENTRY_DWRR_BALANCE             GENMASK(19, 0)
+#define HSCH_DWRR_ENTRY_DWRR_BALANCE_SET(x)\
+	FIELD_PREP(HSCH_DWRR_ENTRY_DWRR_BALANCE, x)
+#define HSCH_DWRR_ENTRY_DWRR_BALANCE_GET(x)\
+	FIELD_GET(HSCH_DWRR_ENTRY_DWRR_BALANCE, x)
+
 /*      HSCH:HSCH_MISC:HSCH_CFG_CFG */
 #define HSCH_HSCH_CFG_CFG         __REG(TARGET_HSCH, 0, 1, 163104, 0, 1, 648, 284, 0, 1, 4)
 

drivers/net/ethernet/microchip/sparx5/sparx5_qos.c

@@ -296,6 +296,36 @@ static int sparx5_shaper_conf_set(struct sparx5_port *port,
 	return 0;
 }
 
+static u32 sparx5_weight_to_hw_cost(u32 weight_min, u32 weight)
+{
+	return ((((SPX5_DWRR_COST_MAX << 4) * weight_min / weight) + 8) >> 4) -
+	       1;
+}
+
+static int sparx5_dwrr_conf_set(struct sparx5_port *port,
+				struct sparx5_dwrr *dwrr)
+{
+	int i;
+
+	spx5_rmw(HSCH_HSCH_CFG_CFG_HSCH_LAYER_SET(2) |
+		 HSCH_HSCH_CFG_CFG_CFG_SE_IDX_SET(port->portno),
+		 HSCH_HSCH_CFG_CFG_HSCH_LAYER | HSCH_HSCH_CFG_CFG_CFG_SE_IDX,
+		 port->sparx5, HSCH_HSCH_CFG_CFG);
+
+	/* Number of *lower* indexes that are arbitrated dwrr */
+	spx5_rmw(HSCH_SE_CFG_SE_DWRR_CNT_SET(dwrr->count),
+		 HSCH_SE_CFG_SE_DWRR_CNT, port->sparx5,
+		 HSCH_SE_CFG(port->portno));
+
+	for (i = 0; i < dwrr->count; i++) {
+		spx5_rmw(HSCH_DWRR_ENTRY_DWRR_COST_SET(dwrr->cost[i]),
+			 HSCH_DWRR_ENTRY_DWRR_COST, port->sparx5,
+			 HSCH_DWRR_ENTRY(i));
+	}
+
+	return 0;
+}
+
 static int sparx5_leak_groups_init(struct sparx5 *sparx5)
 {
 	struct sparx5_layer *layer;
@@ -438,3 +468,46 @@ int sparx5_tc_tbf_del(struct sparx5_port *port, u32 layer, u32 idx)
 
 	return sparx5_shaper_conf_set(port, &sh, layer, idx, group);
 }
+
+int sparx5_tc_ets_add(struct sparx5_port *port,
+		      struct tc_ets_qopt_offload_replace_params *params)
+{
+	struct sparx5_dwrr dwrr = {0};
+	/* Minimum weight for each iteration */
+	unsigned int w_min = 100;
+	int i;
+
+	/* Find minimum weight for all dwrr bands */
+	for (i = 0; i < SPX5_PRIOS; i++) {
+		if (params->quanta[i] == 0)
+			continue;
+		w_min = min(w_min, params->weights[i]);
+	}
+
+	for (i = 0; i < SPX5_PRIOS; i++) {
+		/* Strict band; skip */
+		if (params->quanta[i] == 0)
+			continue;
+
+		dwrr.count++;
+
+		/* On the sparx5, bands with higher indexes are preferred and
+		 * arbitrated strict. Strict bands are put in the lower indexes,
+		 * by tc, so we reverse the bands here.
+		 *
+		 * Also convert the weight to something the hardware
+		 * understands.
+		 */
+		dwrr.cost[SPX5_PRIOS - i - 1] =
+			sparx5_weight_to_hw_cost(w_min, params->weights[i]);
+	}
+
+	return sparx5_dwrr_conf_set(port, &dwrr);
+}
+
+int sparx5_tc_ets_del(struct sparx5_port *port)
+{
+	struct sparx5_dwrr dwrr = {0};
+
+	return sparx5_dwrr_conf_set(port, &dwrr);
+}

drivers/net/ethernet/microchip/sparx5/sparx5_qos.h

@@ -34,6 +34,9 @@
 #define SPX5_SE_BURST_MIN 1
 #define SPX5_SE_BURST_UNIT 4096
 
+/* Dwrr */
+#define SPX5_DWRR_COST_MAX 63
+
 struct sparx5_shaper {
 	u32 mode;
 	u32 rate;
@@ -51,6 +54,11 @@ struct sparx5_layer {
 	struct sparx5_lg leak_groups[SPX5_HSCH_LEAK_GRP_CNT];
 };
 
+struct sparx5_dwrr {
+	u32 count; /* Number of inputs running dwrr */
+	u8 cost[SPX5_PRIOS];
+};
+
 int sparx5_qos_init(struct sparx5 *sparx5);
 
 /* Multi-Queue Priority */
@@ -64,4 +72,11 @@ int sparx5_tc_tbf_add(struct sparx5_port *port,
 		      u32 layer, u32 idx);
 int sparx5_tc_tbf_del(struct sparx5_port *port, u32 layer, u32 idx);
 
+/* Enhanced Transmission Selection */
+struct tc_ets_qopt_offload_replace_params;
+int sparx5_tc_ets_add(struct sparx5_port *port,
+		      struct tc_ets_qopt_offload_replace_params *params);
+
+int sparx5_tc_ets_del(struct sparx5_port *port);
+
 #endif	/* __SPARX5_QOS_H__ */

drivers/net/ethernet/microchip/sparx5/sparx5_tc.c

@@ -58,6 +58,55 @@ static int sparx5_tc_setup_qdisc_tbf(struct net_device *ndev,
 	return -EOPNOTSUPP;
 }
 
+static int sparx5_tc_setup_qdisc_ets(struct net_device *ndev,
+				     struct tc_ets_qopt_offload *qopt)
+{
+	struct tc_ets_qopt_offload_replace_params *params =
+		&qopt->replace_params;
+	struct sparx5_port *port = netdev_priv(ndev);
+	int i;
+
+	/* Only allow ets on ports  */
+	if (qopt->parent != TC_H_ROOT)
+		return -EOPNOTSUPP;
+
+	switch (qopt->command) {
+	case TC_ETS_REPLACE:
+
+		/* We support eight priorities */
+		if (params->bands != SPX5_PRIOS)
+			return -EOPNOTSUPP;
+
+		/* Sanity checks */
+		for (i = 0; i < SPX5_PRIOS; ++i) {
+			/* Priority map is *always* reverse e.g: 7 6 5 .. 0 */
+			if (params->priomap[i] != (7 - i))
+				return -EOPNOTSUPP;
+			/* Throw an error if we receive zero weights by tc */
+			if (params->quanta[i] && params->weights[i] == 0) {
+				pr_err("Invalid ets configuration; band %d has weight zero",
+				       i);
+				return -EINVAL;
+			}
+		}
+
+		sparx5_tc_ets_add(port, params);
+		break;
+	case TC_ETS_DESTROY:
+
+		sparx5_tc_ets_del(port);
+
+		break;
+	case TC_ETS_GRAFT:
+		return -EOPNOTSUPP;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return -EOPNOTSUPP;
+}
+
 int sparx5_port_setup_tc(struct net_device *ndev, enum tc_setup_type type,
 			 void *type_data)
 {
@@ -66,6 +115,8 @@ int sparx5_port_setup_tc(struct net_device *ndev, enum tc_setup_type type,
 		return sparx5_tc_setup_qdisc_mqprio(ndev, type_data);
 	case TC_SETUP_QDISC_TBF:
 		return sparx5_tc_setup_qdisc_tbf(ndev, type_data);
+	case TC_SETUP_QDISC_ETS:
+		return sparx5_tc_setup_qdisc_ets(ndev, type_data);
 	default:
 		return -EOPNOTSUPP;
 	}